Become a Site Supporter and Never see Ads again!

Author Topic: Right angle trs instead of xlr? Bueno?  (Read 3965 times)

0 Members and 1 Guest are viewing this topic.

Offline Elguapo511

  • Trade Count: (1)
  • Taperssection Regular
  • **
  • Posts: 109
Right angle trs instead of xlr? Bueno?
« on: November 03, 2019, 10:51:40 AM »
For foot print reasons I am gonna buy a pack of right angle trs to female xlr cables.

Any reason not to other than the slightly lower durability with the trs ?

This is going to allow a much smoother set up.   

Offline rumbleseat

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 100
  • Gender: Male
    • Sonicsational Audio
Re: Right angle trs instead of xlr? Bueno?
« Reply #1 on: November 03, 2019, 11:25:10 AM »
Just double check that your deck supplies phantom power to the TRS.  It probably does, but standalone TRS input jacks will usually not supply phantom power due to the potential for shorting when the plug is inserted.  Because of this, make sure you never plug or unplug the TRS cables while the phantom power is on.
AKG C480B CK61 cards or AKG C568EB or Church CA-11 cards >  Canare L-4E6S with Neutrik EMC > Tascam DR-680 MKII or DR-44WL > memories

Offline Elguapo511

  • Trade Count: (1)
  • Taperssection Regular
  • **
  • Posts: 109
Re: Right angle trs instead of xlr? Bueno?
« Reply #2 on: November 03, 2019, 01:17:51 PM »
Nice tip.

I have an ederol r-44 and maybe a zoom h6n.   So I think I’m ok. 

Offline checht

  • Site Supporter
  • Trade Count: (5)
  • Taperssection Member
  • *
  • Posts: 765
  • Let's meet at alternate foods at the break
Re: Right angle trs instead of xlr? Bueno?
« Reply #3 on: November 03, 2019, 01:55:19 PM »
Why not right angle stubbie xlr's?
Schoeps MK41 x 2, MK22 x 2; Vanguard V1s matched pair; Niaint x8
Schoeps kcy5, nbob actives
Naiant PFA 60v, PFA 48v, IPA
Sound Devices MP-6II; Sony PCM-A10

Recordings at LMA

Offline Elguapo511

  • Trade Count: (1)
  • Taperssection Regular
  • **
  • Posts: 109
Re: Right angle trs instead of xlr? Bueno?
« Reply #4 on: November 03, 2019, 02:38:30 PM »
I don’t see those as available.  They are a bit more expensive and still a bit bulky.

But I am hoping to be proven wrong...

Offline checht

  • Site Supporter
  • Trade Count: (5)
  • Taperssection Member
  • *
  • Posts: 765
  • Let's meet at alternate foods at the break
Schoeps MK41 x 2, MK22 x 2; Vanguard V1s matched pair; Niaint x8
Schoeps kcy5, nbob actives
Naiant PFA 60v, PFA 48v, IPA
Sound Devices MP-6II; Sony PCM-A10

Recordings at LMA

Offline relefunt

  • Trade Count: (10)
  • Taperssection Member
  • ***
  • Posts: 276
  • Gender: Male
  • kindfulness
    • Milwaukee Taper
Re: Right angle trs instead of xlr? Bueno?
« Reply #6 on: November 06, 2019, 01:51:37 AM »
I have purchased these stubby right-angle XLR cables from Ted and they are worth every penny. I went with having a short (18 inch) cable for the recorder and then I can use an XLR extension of whatever length cable I need. Other people will have different wants/needs.

What Ted is selling is inexpensive compared to most other costs in the recording chain and are beautiful, well-made cables.
AKG c414xls, Beyerdynamic MC930, Line Audio CM3 and OM1. Superluxe S502mk2
Sneaky: Church CA11+14, Audiotechnica AT853.
Preamps: Shure FP24, CA9200.
Recorder: Sound Devices MixPre6, Roland R05, Sony M10.
my local taping blog: milwaukeetaper.com

Offline Gutbucket

  • record > listen > revise technique
  • Trade Count: (15)
  • Needs to get out more...
  • *****
  • Posts: 15700
  • Gender: Male
  • "Better to love music than respect it" ~Stravinsky
Re: Right angle trs instead of xlr? Bueno?
« Reply #7 on: November 06, 2019, 09:33:43 AM »
I was initially concerned about having to use TRS into ch5-6 of the Tascam DR680 (no XLRs for those channels), but never had a problem other than an occasional loose plug which needed to be pushed back in fully. 

In light of a non-locking TRS jack in contrast to a locking XLR, make sure the reach of the right-angle plug or adapter provides sufficient clearance so that the plug seats complete without contacting the surrounding edges of the recorder or case.  The connection relies on the spring tension of the jack contacts to hold the plug in place.
musical volition > vibrations > voltages > numeric values > voltages > vibrations> virtual teleportation time-machine experience
Better recording made easy - >>Improved PAS table<< | Made excellent- >>click here to download the Oddball Microphone Technique illustrated PDF booklet<< (note: This is a 1st draft, now several years old and in need of revision!  Stay tuned)

Offline Elguapo511

  • Trade Count: (1)
  • Taperssection Regular
  • **
  • Posts: 109
Re: Right angle trs instead of xlr? Bueno?
« Reply #8 on: November 06, 2019, 12:43:49 PM »
nice tips everyone. 

I purchased 8 25 footers. trs to xlr

the edirol r-44 has locking jacks,
not sure about the zoom f6n.  its all on the way.

Offline Gutbucket

  • record > listen > revise technique
  • Trade Count: (15)
  • Needs to get out more...
  • *****
  • Posts: 15700
  • Gender: Male
  • "Better to love music than respect it" ~Stravinsky
Re: Right angle trs instead of xlr? Bueno?
« Reply #9 on: November 07, 2019, 01:24:41 PM »
I doubt the TRS jacks into the R-44 actually lock.  I use R-44 but have never run TRS into it, and it appears to uses standard combo input jacks which do not lock TRS plugs but do lock XLRs. 

musical volition > vibrations > voltages > numeric values > voltages > vibrations> virtual teleportation time-machine experience
Better recording made easy - >>Improved PAS table<< | Made excellent- >>click here to download the Oddball Microphone Technique illustrated PDF booklet<< (note: This is a 1st draft, now several years old and in need of revision!  Stay tuned)

Offline Gutbucket

  • record > listen > revise technique
  • Trade Count: (15)
  • Needs to get out more...
  • *****
  • Posts: 15700
  • Gender: Male
  • "Better to love music than respect it" ~Stravinsky
Re: Right angle trs instead of xlr? Bueno?
« Reply #10 on: November 07, 2019, 01:25:49 PM »
If concerned you can Gaffer-tape them for additional security
musical volition > vibrations > voltages > numeric values > voltages > vibrations> virtual teleportation time-machine experience
Better recording made easy - >>Improved PAS table<< | Made excellent- >>click here to download the Oddball Microphone Technique illustrated PDF booklet<< (note: This is a 1st draft, now several years old and in need of revision!  Stay tuned)

Offline kuba e

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 492
  • Gender: Male
Re: Right angle trs instead of xlr? Bueno?
« Reply #11 on: November 07, 2019, 03:09:34 PM »
In light of a non-locking TRS jack in contrast to a locking XLR, make sure the reach of the right-angle plug or adapter provides sufficient clearance so that the plug seats complete without contacting the surrounding edges of the recorder or case.  The connection relies on the spring tension of the jack contacts to hold the plug in place.

This is very good advice. One of my TRS connector was blocked little bit by the surrounding of the recorder case. It was not visible for the first look. Because the connector was not plugged properly, the signal dropped sometimes. It took me long time to discover the cause.

Offline Elguapo511

  • Trade Count: (1)
  • Taperssection Regular
  • **
  • Posts: 109
Re: Right angle trs instead of xlr? Bueno?
« Reply #12 on: November 15, 2019, 12:06:46 AM »
Not sure if this is a zoom issue or a trs/phantom power issue.

But

My condensor does not make a signal when plugged in with a trs, but does when using an xlr.

Using a zoom h6.

Gonna start a specific thread

Offline Gutbucket

  • record > listen > revise technique
  • Trade Count: (15)
  • Needs to get out more...
  • *****
  • Posts: 15700
  • Gender: Male
  • "Better to love music than respect it" ~Stravinsky
Re: Right angle trs instead of xlr? Bueno?
« Reply #13 on: November 15, 2019, 10:29:39 AM »
That is how Zoom F8 operates. TRS = line input with no phantom power option, XLR = mic-level input with switchable phantom.
This was changed on the F8n revision so that either input connection can be line or mic-level, with or without phantom.

Not sure how the H6 operates.
musical volition > vibrations > voltages > numeric values > voltages > vibrations> virtual teleportation time-machine experience
Better recording made easy - >>Improved PAS table<< | Made excellent- >>click here to download the Oddball Microphone Technique illustrated PDF booklet<< (note: This is a 1st draft, now several years old and in need of revision!  Stay tuned)

 

RSS | Mobile
Page created in 0.144 seconds with 43 queries.
© 2002-2024 Taperssection.com
Powered by SMF