Taperssection.com

Gear / Technical Help => Microphones & Setup => Topic started by: baustin on February 03, 2020, 12:58:07 AM

Title: ISO: (Franken) Nak 300 Windscreen Solution
Post by: baustin on February 03, 2020, 12:58:07 AM

Hiya!

Looking for a Nak 300 windscreen solution. These mics have the Franken-Nak chop/mod and will be in a Shapeways mount.

Any suggestions for Nak or aftermarket windscreens that will stay solidly on the capsule?

I rarely tape anymore but the main/most important (to me) shows I record are in the Caribbean where it can be quite windy. I'm more concerned about the wind blowing the screens off than I am the wind noise being picked up (if it's affecting my mics, it's affecting the band's mics).

Thank you kindly!

Title: Re: ISO: (Franken) Nak 300 Windscreen Solution
Post by: Walstib62 on February 03, 2020, 09:09:32 AM

MOVO!

Title: Re: ISO: (Franken) Nak 300 Windscreen Solution
Post by: capnhook on February 03, 2020, 11:41:19 AM

MOVO WSTT 50 or WST50, same thing..

https://www.movophoto.com/collections/windscreens/products/movo-wst-premium-quality-ballistic-nylon-windscreens



Make sure they are sewn right, with no puckers in the fabric.  I've had to send two back for replacements.

Great price, work fantastic, very transparent I think.

Title: Re: ISO: (Franken) Nak 300 Windscreen Solution
Post by: seethreepo on February 03, 2020, 08:22:16 PM

I’ve had good luck using small diameter rubber bands to hold screens in place just don’t  cover any of the vents etc , good to go.

Title: Re: ISO: (Franken) Nak 300 Windscreen Solution
Post by: baustin on February 04, 2020, 09:47:25 PM

Silly question... 3cm size?