Waltmon -- The VM44 Classic would get you the caps + the bodies, but you'd still need the Milab "active cables" (I refer to them as the Links cables) to run the caps without the bodies. In other words, there has to be something to connect the VM-44 caps to the PFAs. I don't know if the Links cables are available outside of a set of VM-44 Links (at least I don't see them on the Milab website), and I'm not familiar with any 3rd party knockoffs (like some of the Schoeps or AKG options that are available).
The Links are similar to the Schoeps KC cables...
...except the mic body side of the cable (left in the above picture) is integral to the mic bodies and cannot be removed from the mic body.* The cap side of the Links, like the KC (right in the above pic), provides the connection point for the caps.
* The Schoeps system is completely modular. You can run the mic bodies + caps with or without the "active" cables in between. In the Milab world, since the mic body side of the Links are integrated with the mic body, you must
always run the Links cables between body and caps, and cannot put the caps directly onto the mic bodies without the Links.