Check the 2nd sample made with external mics(dpa4061) and let me know if you can hear anything.
I can´t hear anything and I assume nobody else would just by listening to this song on a home or carstereo or with headphones.
I really can't find the split. Where is it?
Roel
The 2nd track starts 24seconds before the track´s ending.
2 merged tracks make: 51,380 seconds
track 2 makes the last 23,790 seconds
By the way:
step 1: the
LEVEL-LED flashes
green when the peak, set in the preset-menue, has been topped by the levelmeters(-6db is max setting and my setting for taping - available settings for LEVEL-LED are: -54dB, -38dB, -20dB, -12dB and my setting -6dB).
When levels are between -6db(my setting) and 0db the green light flashes.
step 2: the
OVER-LED flashes
red as soon as clipping occurs...of course;)..... AND stops flashing as soon as no clipping occurs.
As said before these 2 LEDs and the red REC-button LED can be disabled in the preset-menue for stealthing
.
Some of you might use the LEDs for blind-level-checking...set the LEVEL-LED to -12dB(green) and put the pmd620 into your front-pocket where you can have an eye on the LEVEL-LED and OVER-LED.
The same goes for "distant-level-checking": just make sure you can see the pmd620 when hitting the kick-drum as musician or whatelse
.