Taperssection.com

Gear / Technical Help => Microphones & Setup => Topic started by: bush on May 22, 2003, 02:39:11 PM

Title: Taping Cast Iron Filter???
Post by: bush on May 22, 2003, 02:39:11 PM

I'm going to cast iron filter tonite in huntsville and will probably be the only taper there. ;)

i plan on running my octava cards in a loose din or closed ortf...whatever

i also have a set of at853's...i know the place and will pretty much have the run of the place.

question...run the 853's onstage?...what caps and config.
I've never run onstage and want to try, just dont want it to be a total flop.

any ideas? ??? ???

thanks

bush

Title: Re:Taping Cast Iron Filter???
Post by: nickgregory on May 22, 2003, 02:49:10 PM

Quote from: jbush on May 22, 2003, 02:39:11 PM

I'm going to cast iron filter tonite in huntsville and will probably be the only taper there. ;)

i plan on running my octava cards in a loose din or closed ortf...whatever

i also have a set of at853's...i know the place and will pretty much have the run of the place.

question...run the 853's onstage?...what caps and config.
I've never run onstage and want to try, just dont want it to be a total flop.

any ideas? ??? ???

thanks

bush

I would not recommend running on stage with CIF, since their music is heavy on the vocals, which you will not get on stage since they will be going through the PA.

I would recommend running the oktavas in whatever config suits the venue (I usually run DIN, but I am not running the Oktavas).

Most importantly, enjoy the show.  They are a great bunch of guys.  Scott Shupe, the bands manager will probably ask for a copy of the show, and give you an addy.  

Enjoy!

Nick

Title: Re:Taping Cast Iron Filter???
Post by: bush on May 23, 2003, 12:30:52 PM

Got to say ...GO check these guys out if you get a chance.

Really good stuff with LOTS of energy.

I had a wonderful time and got really drunk, I think everybody did...even the band.

The 4th set, yes 4th set was a little on the hilarious side ;D

Title: Re:Taping Cast Iron Filter???
Post by: nickgregory on May 23, 2003, 12:56:58 PM

glad you had a good time....did you get to run tape for it?

Title: Re:Taping Cast Iron Filter???
Post by: bush on May 23, 2003, 02:20:43 PM

Oh yeah...i ran oktavas FOB about 15 ft. ortf cards, and sp at853's from the stage lip xy cards(just havent really used these and wanted to try somehing different)

It was a blast, but I'm feelin it today!!!!

Title: Re:Taping Cast Iron Filter???
Post by: nickgregory on May 23, 2003, 02:34:07 PM

Quote from: jbush on May 23, 2003, 02:20:43 PM

Oh yeah...i ran oktavas FOB about 15 ft. ortf cards, and sp at853's from the stage lip xy cards(just havent really used these and wanted to try somehing different)

It was a blast, but I'm feelin it today!!!!

Cool, I look forward to hearing the tape!

Title: Re:Taping Cast Iron Filter???
Post by: bush on May 23, 2003, 02:46:10 PM

I'm just about to leave work to go home and transfer via FIREWIRE!!!!


I love my jb3!!!

Nick-I'll let you know when i get them done ;D

Title: Re:Taping Cast Iron Filter???
Post by: nickgregory on May 23, 2003, 03:28:15 PM

cool, when you get it done, we can get it uploaded to archive.org to make it available to others!

Nick