Become a Site Supporter and Never see Ads again!

Author Topic: Microphone Stand Preference?  (Read 7117 times)

0 Members and 1 Guest are viewing this topic.

Offline coloartist

  • Trade Count: (13)
  • Needs to get out more...
  • *****
  • Posts: 2067
  • MGoldey -"you can shove those mics up your ass
Microphone Stand Preference?
« on: August 04, 2005, 10:53:50 AM »
I have a Manfretto microphone stand that is very compact and is good for stealthing, but I am looking for a heavier duty stand, that will extend past 7'. I always end up clamping onto someones heavier duty stand when I am an the Tapers secton. I love my stand but I would like to be able to go to 8' or 9' in some situations, and be a little more sturdy. I have a birthday coming up, and somebody wants to know what they can buy me. Do you all have any preferences? Links would be appreciated.

Thank You, Coloartist
mk4>Kwon/din a/din>kc5>cmc6>kindkables XLR>788T
mk22>Kwon/NOS>kc5>cmc6>kindkablesXLR>788t                                                     
Canon XH-A1 Sony AX100                       
Samsung Backlit LED 55">Pioneer Elite SC-27>Snell Acoustics E.5  Series

Offline fozzy

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 3810
  • Gender: Male
  • move along, nothing much to see here
Re: Microphone Stand Preference?
« Reply #1 on: August 04, 2005, 11:03:36 AM »
I have a bogen 3320 for travel/fob and one of these off ebay(item 7534930582).

I have had 10+ sets of mics on the 13 footer.
 There are also some good bogen options like the 3322, 3336,
MK 4V > KCY 250/5 Ig (KS 10I)  > VST62IUg > 722

Offline coloartist

  • Trade Count: (13)
  • Needs to get out more...
  • *****
  • Posts: 2067
  • MGoldey -"you can shove those mics up your ass
Re: Microphone Stand Preference?
« Reply #2 on: August 04, 2005, 11:12:24 AM »
Looks pretty nice, especially for $47.00. 3-way tip on the end, and 13'. Anybody else ?

mk4>Kwon/din a/din>kc5>cmc6>kindkables XLR>788T
mk22>Kwon/NOS>kc5>cmc6>kindkablesXLR>788t                                                     
Canon XH-A1 Sony AX100                       
Samsung Backlit LED 55">Pioneer Elite SC-27>Snell Acoustics E.5  Series

Offline adubphoto

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 176
  • Gender: Male
  • What happened?!
    • www.boymangodshit.com
Re: Microphone Stand Preference?
« Reply #3 on: August 04, 2005, 11:21:52 AM »
whatever you do, dont get the shure 15a. That damn thing is a pain in the ass to adjust. I think i'll use it for a coat rack and get a different one.

http://www.aiconsol.com/s15a.html
Ret. Audio: Rode NT5's(rodents) > Omnistudio USB > Gateway5300> Cubase
Visual: Canon 30D // Sigma 24-70mm f2.8 // Canon 50mm f1.8 // Canon 70-200mm f2.8 // Canon 580EX

 
Aquarium Rescue Unit Flickr photo set | FLips Flickr photo set | GRAB Flickr photo set

Offline coloartist

  • Trade Count: (13)
  • Needs to get out more...
  • *****
  • Posts: 2067
  • MGoldey -"you can shove those mics up your ass
Re: Microphone Stand Preference?
« Reply #4 on: August 04, 2005, 11:24:42 AM »
whatever you do, dont get the shure 15a. That damn thing is a pain in the ass to adjust. I think i'll use it for a coat rack and get a different one.

http://www.aiconsol.com/s15a.html

Thanks for the info. Good or Bad!!  :D
mk4>Kwon/din a/din>kc5>cmc6>kindkables XLR>788T
mk22>Kwon/NOS>kc5>cmc6>kindkablesXLR>788t                                                     
Canon XH-A1 Sony AX100                       
Samsung Backlit LED 55">Pioneer Elite SC-27>Snell Acoustics E.5  Series

Offline Humbug

  • Trade Count: (5)
  • Needs to get out more...
  • *****
  • Posts: 2161
  • Gender: Male
  • Humbug Hum Rejection Unit
    • Trading site
Re: Microphone Stand Preference?
« Reply #5 on: August 04, 2005, 11:30:44 AM »
You guys seem to go for those stands with the legs that stick out to the side a lot..guess thats OK in a taperssection, but what about when you're FOB, don't people trip over them?

Any mic stands suitable for FOB, with legs that lay flat (or nearly flat) on the floor, preferably black, and 7-8' high?

Next I've got to find somewhere with them in the UK..

Cheers

Humbug
UK based taper: MK4>Nbox Platinum>PCM-M10
AT853C>CA9200 / PIPsqueak>Tascam DR-2D

http://www.archive.org/bookmarks/Humbug66

Offline coloartist

  • Trade Count: (13)
  • Needs to get out more...
  • *****
  • Posts: 2067
  • MGoldey -"you can shove those mics up your ass
Re: Microphone Stand Preference?
« Reply #6 on: August 04, 2005, 11:34:09 AM »
Humbug, You just described my Manfretto Stand, excactly. I cut a little off the ends of each of the 3 bottom legs, and they can go totally flat to the floor. I will take a photo at lunch.

Great FOB stand.
mk4>Kwon/din a/din>kc5>cmc6>kindkables XLR>788T
mk22>Kwon/NOS>kc5>cmc6>kindkablesXLR>788t                                                     
Canon XH-A1 Sony AX100                       
Samsung Backlit LED 55">Pioneer Elite SC-27>Snell Acoustics E.5  Series

Offline adubphoto

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 176
  • Gender: Male
  • What happened?!
    • www.boymangodshit.com
Re: Microphone Stand Preference?
« Reply #7 on: August 04, 2005, 11:37:53 AM »
You guys seem to go for those stands with the legs that stick out to the side a lot..guess thats OK in a taperssection, but what about when you're FOB, don't people trip over them?

Any mic stands suitable for FOB, with legs that lay flat (or nearly flat) on the floor, preferably black, and 7-8' high?

Next I've got to find somewhere with them in the UK..

Cheers

Humbug

Yes, thats a problem for me. I sometimes put chairs on either side of it and set the stand up so that the legs dont stick out as far. This of course makes it less stable. I'll also tape the legs down. It doesnt really keep it down but at least i know if the stand has been disturbed while I was away.

I've thought about using christmas lights to wrap around the legs so people will see them however, that solution has many drawbacks.

I've never seen those w/ the flat legs. do you have any pics?


edit:
Oh i see coloartist has got some.
Ret. Audio: Rode NT5's(rodents) > Omnistudio USB > Gateway5300> Cubase
Visual: Canon 30D // Sigma 24-70mm f2.8 // Canon 50mm f1.8 // Canon 70-200mm f2.8 // Canon 580EX

 
Aquarium Rescue Unit Flickr photo set | FLips Flickr photo set | GRAB Flickr photo set

Offline coloartist

  • Trade Count: (13)
  • Needs to get out more...
  • *****
  • Posts: 2067
  • MGoldey -"you can shove those mics up your ass
Re: Microphone Stand Preference?
« Reply #8 on: August 04, 2005, 12:40:36 PM »
Bogen Options. Anybody have these. The legs look like they can go fairly flat.

mk4>Kwon/din a/din>kc5>cmc6>kindkables XLR>788T
mk22>Kwon/NOS>kc5>cmc6>kindkablesXLR>788t                                                     
Canon XH-A1 Sony AX100                       
Samsung Backlit LED 55">Pioneer Elite SC-27>Snell Acoustics E.5  Series

Offline audBall

  • Trade Count: (37)
  • Needs to get out more...
  • Posts: 6479
  • Gender: Male
  • Feel brand new about it
Re: Microphone Stand Preference?
« Reply #9 on: August 04, 2005, 12:44:51 PM »
I've thought about using christmas lights to wrap around the legs so people will see them however, that solution has many drawbacks.

[Really loud / Next to mic stand during show]
"Hey Braahhh, can I borrow those lights to twirl around my head during the show?  I'll bring `em back."
mg m20.21.23 ■ akg ck61.62.63 »  nbob■naiant
aercomp2 ■ v2∞3 ■ sx-m2d2
d100 ■ pmd661 ■ r44ocm ■ f3

Offline The Kilted Taper

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2344
  • Gender: Male
  • Real men wear kilts.
Re: Microphone Stand Preference?
« Reply #10 on: August 04, 2005, 12:45:39 PM »
Go to eBay and search for "light stands". Amvona is a one that's on there a lot. I got my stand through them, and it was only $25 with shipping. 9', air cushioned. Big foot print, but in the section it's fine. There's actually a lot of 6 9 footers on there right now with a current bid of $36. Ends in 2 hours:

http://cgi.ebay.com/LOT-OF-6-AIR-CUSHIONED-PRO-PHOTO-VIDEO-LIGHT-STAND-NEW_W0QQitemZ7534606037QQcategoryZ30080QQrdZ1QQcmdZViewItem
"The guy who's been dissed, dismissed and demoted so often that he should have officially changed his first name to "Backup." "

Offline adubphoto

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 176
  • Gender: Male
  • What happened?!
    • www.boymangodshit.com
Re: Microphone Stand Preference?
« Reply #11 on: August 04, 2005, 12:46:59 PM »
Thats the stand I want to get. But if you lowered those legs all the way to the ground you've got a something like a 2.5 food diameter footprint that the thing wil take up. It seems like the legs would still be in the way.
Ret. Audio: Rode NT5's(rodents) > Omnistudio USB > Gateway5300> Cubase
Visual: Canon 30D // Sigma 24-70mm f2.8 // Canon 50mm f1.8 // Canon 70-200mm f2.8 // Canon 580EX

 
Aquarium Rescue Unit Flickr photo set | FLips Flickr photo set | GRAB Flickr photo set

Offline The Kilted Taper

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2344
  • Gender: Male
  • Real men wear kilts.
Re: Microphone Stand Preference?
« Reply #12 on: August 04, 2005, 12:50:22 PM »
Yes, big foot print, but remember, you can adjust ow far out you put the legs. Yes you loose some stability, but that's what duct tape is for!  ;)

Seriously, it's not that bad. I've seen worse. And if you are in a small section, have folks pull in tight. The distance is perfect for my back to fit in between two of the legs.
"The guy who's been dissed, dismissed and demoted so often that he should have officially changed his first name to "Backup." "

Offline jkoch

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 855
  • Gender: Male
  • groovy!
Re: Microphone Stand Preference?
« Reply #13 on: August 04, 2005, 01:04:18 PM »
at dmb at the gorge there was a HUGE beach ball. damn thing was over 3' tall when you set it on the ground and it had glow sticks (like they sell to put around your neck, etc) in it. needless to say it got too close to the stand and had to suffer the consequences. we took the glow sticks as our spoils and taped them to the mic stand and became the most colorful tapers in the place.
Schoeps MK4s > active cables > NBox+ > Edirol R-09HR

Offline coloartist

  • Trade Count: (13)
  • Needs to get out more...
  • *****
  • Posts: 2067
  • MGoldey -"you can shove those mics up your ass
Re: Microphone Stand Preference?
« Reply #14 on: August 04, 2005, 01:16:49 PM »
Born Again- That is 6 stands for $36.00 right now. That would definatly be a good deal. It will probably doulble at the end of the Auction, but would still be a great deal if they are any good. Do you know if the mount could be changed to a threaded mount? 9' should do fine.
« Last Edit: August 04, 2005, 01:18:21 PM by coloartist »
mk4>Kwon/din a/din>kc5>cmc6>kindkables XLR>788T
mk22>Kwon/NOS>kc5>cmc6>kindkablesXLR>788t                                                     
Canon XH-A1 Sony AX100                       
Samsung Backlit LED 55">Pioneer Elite SC-27>Snell Acoustics E.5  Series

 

RSS | Mobile
Page created in 0.106 seconds with 40 queries.
© 2002-2024 Taperssection.com
Powered by SMF