Taperssection.com
Gear / Technical Help => Recording Gear => Recording Media => Topic started by: nxb on May 09, 2007, 04:20:10 AM
-
I taped a show with a R9 last night, the SD card was formatted before the show, I recorded for a shade over 2 hours and checked several times through the show that ewverything was Ok, it was. At the end of the show I stopped the R9 recording, powered down then removed the SD card and placed it in the protective wallet. When I got home I put the SD card back in the R9 to extract the WAV file but it said the card was unformatted. I removed the SD card and tried in a PC card reader but again it said the card was not formatted and would I like to format it. The card is a regular Transcend 4GB SD card.
I've tried smart recovery utilities but they don't recognise any file on the SD card.
How can I extract the WAV file from the card or is the card damaged?
Any suggestions apart from buying a new card?
-
I taped a show with a R9 last night, the SD card was formatted before the show, I recorded for a shade over 2 hours and checked several times through the show that ewverything was Ok, it was. At the end of the show I stopped the R9 recording, powered down then removed the SD card and placed it in the protective wallet. When I got home I put the SD card back in the R9 to extract the WAV file but it said the card was unformatted. I removed the SD card and tried in a PC card reader but again it said the card was not formatted and would I like to format it. The card is a regular Transcend 4GB SD card.
I've tried smart recovery utilities but they don't recognise any file on the SD card.
How can I extract the WAV file from the card or is the card damaged?
Any suggestions apart from buying a new card?
Just to know, are you using latest 1.20 firmware? And did you format the card while inside the deck as you should?
If so, likely a bunk card that failed, or something not right about the R-09 deck? Ever use this deck with a different card?
-
Just to know, are you using latest 1.20 firmware? And did you format the card while inside the deck as you should?
If so, likely a bunk card that failed, or something not right about the R-09 deck? Ever use this deck with a different card?
I'm using firmware 1.20 and the card was formatted in the R9 before the show
I successfully taped a show with the same deck on the previous night so looks like a bad card.
Ho hum, better buy a new one...
-
I was recently stunned to find that the R-09 "formatting" procedure is actually NOT formatting. Normally a formatting device for flash cards "flushes" the card, so that there's no data left in the end. What the R-09 firmware does to SD cards has nothing to do with that. It just alters the SD's registry/log file that describes what's in. The data are left unchanged.
If you still don't believe me do the following experiment : format an SD full of data with your R-09 then try to recover the files with a good recovery utility, like Easy recovery or any other good soft. You'll get your show back.
This is a life-saving procedure, and I guess a last-resort option for nxb's problem:
1) get a really good recovery soft ;
2) try recovering "as is" with the soft ;
3) if that fails, re-format the card from within the R-09 (not usually advised!) That will correct a possibly corrupted registry/log file, and finally
4) try recovering anew.
-
The card is a regular Transcend 4GB SD card.
That card is unreliable in the R-09. I had the exact same experience using it in my R-09 with the latest firmware.
No files could be taken off, or read with a card reader.
The card does work perfectly in other devices, so it is not the card. Once I formatted the card with the computer,
I'm able to use the card daily in a card reader for backup and storage with no problems.
Some people said this card worked for them, and that is why I bought it, but I could never recommend it
for use in the R-09.