Taperssection.com
Gear / Technical Help => Recording Gear => Topic started by: edtyre on June 15, 2021, 06:35:05 PM
-
So this is the 4th deck that Nicky modded
because of a broken input Jack that came
unsoldered from board. Not 4 A-10’s, but R9, R5 and M10
The last picture is of all the parts we left out
Like mics, mounting screw, led light, speaker etc
https://imgur.com/a/59aRgVI
-
How/why is the input jack breaking?
Is it a poor solder on the board and just from normal use?
Do you run mic or line input with baby nbox?
Can you still switch between mic/line input via menu?
Does the removal of those parts improve/lower noise?
Sorry for all the questions Ed.
Looks good.. well done!!
Thanks for pics and info!
-
How/why is the input jack breaking?
Is it a poor solder on the board and just from normal use?
Do you run mic or line input with baby nbox?
Can you still switch between mic/line input via menu?
Does the removal of those parts improve/lower noise?
Sorry for all the questions Ed.
Looks good.. well done!!
Thanks for pics and info!
Mine all broke from just heavy use inside my pockets
stealthing a lot of shows. If I had used them open taping in a bag
none of them would have broke. You can still switch between line and mic.
Deck works fine without missing parts!
-
^Thanks.. I’m going “all in” (kind of) with the A10 as my small recorder… hoping it doesn’t fall apart on me. It’s good to know that there are solutions if needed.
-
Thanks for the info Ed!
-
Mod perfectly dedicated to the task.
Almost to the point where the A10 bits might be transplanted directly into the Nbox.
-
Mod perfectly dedicated to the task.
Almost to the point where the A10 bits might be transplanted directly into the Nbox.
hmmmmmmmmmmm.
I would buy one of those.
-
Mod perfectly dedicated to the task.
Almost to the point where the A10 bits might be transplanted directly into the Nbox.
hmmmmmmmmmmm.
I would buy one of those.
I would definitely be tempted by this. Especially since you can basically run the thing entirely from the app.
-
I'd definitely be interested in this, put me down for 2 if Nicky ever considers this!
-
https://imgur.com/a/s1yCGWM
Bad link to picture. Would you re-post the pic please
-
https://imgur.com/a/s1yCGWM
Bad link to picture. Would you re-post the pic please
https://imgur.com/a/59aRgVI
-
So Nicky is modding the A-10 preamp so it has the nbox sound running a babynbox into a modded A-10?