Taperssection.com
Gear / Technical Help => Remote Power => Topic started by: endless_soul on April 05, 2008, 11:44:53 PM
-
battery box SP-SPSB8...
as i understand it this box contains a 9V battery. is this correct?
and if so can i just change the battery once it's ran out by removing the lead?
also how long can i expect it to last? will the use of phantom power from a microtrack / tascam dr-1 help out or is it better to avoid it?
thanks so much
-
The sp-spsb-8 takes a standard 9-volt battery:
http://www.soundprofessionals.com/cgi-bin/gold/item/SP-SPSB-8
As far as how often you should change the battery, I know there have been some threads on this topic, here are a few, suggesting that a standard 9-volt battery should last a few hundred hours, as it only consumes power when connected to the mic:
http://taperssection.com/index.php/topic,67354.msg903818.html#msg903818
http://taperssection.com/index.php/topic,44838.msg578134.html#msg578134
http://taperssection.com/index.php/topic,77444.msg1031403.html#msg1031403
(In contrast, the mini-9volt batteries supposedly only last a maximum of 15 hours: http://taperssection.com/index.php/topic,23562.msg296151.html#msg296151 ]
Personally, if I'm taping something important to me, I just use a new 9-volt battery each time, and I can use the used 9-volt batteries in my guitar pedals.
-
battery box SP-SPSB8...
as i understand it this box contains a 9V battery. is this correct?
and if so can i just change the battery once it's ran out by removing the lead?
also how long can i expect it to last? will the use of phantom power from a microtrack / tascam dr-1 help out or is it better to avoid it?
thanks so much
What type of mics are you using?
-
thanks
im using SPcmc8 cardioids.
sorry about the stupidity of the question, but will i be able to easily change the battery inside?
is it just a question of opening the lid and change the 9V battery?
for what i understand if i open the battery box the warranty is voided am i correct?
x
and thanks
-
Changing the battery simply requires removing a few screws or a slide cover. I was asking about the mics more for powering options. So since you already chose to power the mics from a battery box, you cannot use the phantom power from an M-Audio Microtrack.
-
thanks that's exactly what i wanted to know ;D
cool im off on wed to tape my first show with this mics!!!!