Become a Site Supporter and Never see Ads again!

Author Topic: MT II External Power  (Read 9822 times)

0 Members and 1 Guest are viewing this topic.

Offline mblindsey

  • Trade Count: (23)
  • Taperssection All-Star
  • ****
  • Posts: 1245
MT II External Power
« on: December 19, 2007, 08:35:06 PM »
Hopefully, this is not a dupe thread.

I just wanted to show a pic of the external power I purchased at walmart for my MT II (~$9).  It is just a 4 AA sled with USB connection and an on/off switch.

I haven't used it in the field yet, but it seems okay in quick tests at home.  The MT II shows that it is being charged when the battery is plugged in.

The retractable cable that came with it only powers the MT II.  I cannot use it to transfer a file via USB.

EDIT:  ...and that USB cable that came with it fits very nicely next to the S/PDIF I bought from kindcables.com

--Michael

« Last Edit: December 19, 2007, 08:45:06 PM by mblindsey »
Mics:  Microtech Gefell m200/M20/nBob Actives>PFA, CA-11
Pre's: USB Pre2, 1x V3, 2x V3 w/optimod, MP2, Church Ugly
Decks: SD MixPre 6 II, R44 Oade Concert Mod, M10
Playback: Grace m9xx->Sen HD 650, Fostex TH-X00, HIFIMAN HEXX
Mixing: RME Fireface UFX->Reaper/Izotope->Yamaha HS8

Offline silentmark

  • Shine with or without cherries ?
  • Trade Count: (5)
  • Needs to get out more...
  • *****
  • Posts: 2685
  • Gender: Male
  • Boat, cucumber, wire ...
Re: MT II External Power
« Reply #1 on: December 20, 2007, 08:02:58 AM »
Assuming that the MT2 is the same 5v as the MT1 there are multiple external solutions & more than one thread on this.

I use this myself, works great http://www.newegg.com/Product/Product.aspx?Item=N82E16855998033

Make sure your MT is fully charged when running your external, otherwise it will drain the external fairly quickly, just an FYI ...
Dissent is the highest form of patriotism. - Howard Zinn, not Thomas Jefferson ...

Mics: Neumann AK50/AK40/AK30/AK20(1 for M/S), AKG568eb's (gathering dust)
Decks: R-44 (OCM), Fostex FR2LE (OWM), Microtacker (semi-retired), D8 (retired), D7 (retired)
Pre-amps: Apogee Minime (semi-retired), Sonosax SX-M2 (semi-retired), Oade mod SBM-1 (retired)
Cables: LC3 actives (older lemo style x2), Audio Magic Hyper Conductor interconnects

http://www.youtube.com/watch?v=J3qrWOOposQ

Offline mblindsey

  • Trade Count: (23)
  • Taperssection All-Star
  • ****
  • Posts: 1245
Re: MT II External Power
« Reply #2 on: December 24, 2007, 10:13:13 AM »
Make sure your MT is fully charged when running your external, otherwise it will drain the external fairly quickly, just an FYI ...

Right you are! 

I charged up the MT II and tossed it in to my bag without setting the the "hold" switch.  So, of course, the thing turned on and the batteries were drained when I got to the show.  I used this 4AA battery sled to power the MT II for two sets that were 50 mins each.  I used brand new Druacell batteries on each set, and at the end of each set the batteries were very warm to the touch and the battery tester showed them down to about half capacity.

--Michael
« Last Edit: December 25, 2007, 01:20:28 PM by mblindsey »
Mics:  Microtech Gefell m200/M20/nBob Actives>PFA, CA-11
Pre's: USB Pre2, 1x V3, 2x V3 w/optimod, MP2, Church Ugly
Decks: SD MixPre 6 II, R44 Oade Concert Mod, M10
Playback: Grace m9xx->Sen HD 650, Fostex TH-X00, HIFIMAN HEXX
Mixing: RME Fireface UFX->Reaper/Izotope->Yamaha HS8

Offline NOLAfishwater

  • is not taping much these days
  • Trade Count: (72)
  • Needs to get out more...
  • *****
  • Posts: 6344
  • Gender: Male
  • I LIKE FISHIN
Re: MT II External Power
« Reply #3 on: January 04, 2008, 03:45:13 PM »
how long do you think this thing would power it for? Looks like it is 5V @ 1.7mA = 8.5 Watt hours. Only $24

http://www.beachaudio.com/Macally/Jboxmini-p-104966.html?utm_campaign=froogle&utm_content=AD_ID&utm_term=jboxmini&utm_medium=cpc&utm_source=froogle&GTKW=jboxmini&GCID=C12585x003


or there is this energizer: 5V @ 2000 mA = 10 watt hours $39.00
http://www.beachaudio.com/Energizer/Er-I25-p-66959.html


Here is another Macally: 5V but it does not list the mA $41
http://www.beachaudio.com/Macally/Ip-481-p-74974.html


Lenmar for $49  -Adds 7 hours of record time to the M-Audio Microtrack 2496
http://www.soundprofessionals.com/cgi-bin/gold/category.cgi?item=LEN-PPU1700B&source=froogle
« Last Edit: January 04, 2008, 04:04:20 PM by NOLAfishwater »

Offline busterr

  • Trade Count: (4)
  • Taperssection Member
  • ***
  • Posts: 413
  • Gender: Male
Re: MT II External Power
« Reply #4 on: January 04, 2008, 11:22:03 PM »
how long do you think this thing would power it for? Looks like it is 5V @ 1.7mA = 8.5 Watt hours. Only $24

http://www.beachaudio.com/Macally/Jboxmini-p-104966.html?utm_campaign=froogle&utm_content=AD_ID&utm_term=jboxmini&utm_medium=cpc&utm_source=froogle&GTKW=jboxmini&GCID=C12585x003


or there is this energizer: 5V @ 2000 mA = 10 watt hours $39.00
http://www.beachaudio.com/Energizer/Er-I25-p-66959.html


Here is another Macally: 5V but it does not list the mA $41
http://www.beachaudio.com/Macally/Ip-481-p-74974.html


Lenmar for $49  -Adds 7 hours of record time to the M-Audio Microtrack 2496
http://www.soundprofessionals.com/cgi-bin/gold/category.cgi?item=LEN-PPU1700B&source=froogle

Along those same lines here's a smaller capacity lenmar for $23 http://www.alwayslowest.com/AL/index.cfm?fuseaction=shop.dspSpecs&part=2245604
Radio Shack has the same lenmar as the SP link provided by NOLAfishwater but for $39(not currently in stock though) http://tinyurl.com/yvtn78

I actually just ordered a Macally(the jbox(ip-481), not the jboxmini) from the Newegg link a few posts above for the MTII I ordered, I've heard good things on that one and Newegg has great prices(got a another 8gb transcend cf card for $50 at the same time).

And FWIW I've used one of those 4xAA usb battery sleds for the past year and the only time I had a problem was when I used Rayovacs instead of Duracells. The sled I got was only $3.95 from batteryspace: http://www.batteryspace.com/index.asp?PageAction=VIEWPROD&ProdID=2970
 
Like others have said though..always fully charge the MT before use, whatever you use. Long term your far better off with a rechargable solution, I could have bought a few macally's for what I've spent on AA's, not to mention saving the environment :).

Offline Rick

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 2537
  • Gender: Male
    • My Recordings
Retired Taper


Roving Sign

  • Guest
  • Trade Count: (0)
Re: MT II External Power
« Reply #6 on: January 05, 2008, 08:57:00 AM »
Make sure your MT is fully charged when running your external, otherwise it will drain the external fairly quickly, just an FYI ...

Right you are! 

I charged up the MT II and tossed it in to my bag without setting the the "hold" switch.  So, of course, the thing turned on and the batteries were drained when I got to the show.  I used this 4AA battery sled to power the MT II for two sets that were 50 mins each.  I used brand new Druacell batteries on each set, and at the end of each set the batteries were very warm to the touch and the battery tester showed them down to about half capacity.


Does the quick drainage actually charging the internal battery?

Offline mblindsey

  • Trade Count: (23)
  • Taperssection All-Star
  • ****
  • Posts: 1245
Re: MT II External Power
« Reply #7 on: January 05, 2008, 09:49:43 AM »
Make sure your MT is fully charged when running your external, otherwise it will drain the external fairly quickly, just an FYI ...

Right you are! 

I charged up the MT II and tossed it in to my bag without setting the the "hold" switch.  So, of course, the thing turned on and the batteries were drained when I got to the show.  I used this 4AA battery sled to power the MT II for two sets that were 50 mins each.  I used brand new Druacell batteries on each set, and at the end of each set the batteries were very warm to the touch and the battery tester showed them down to about half capacity.


Does the quick drainage actually charging the internal battery?

Yes, the MTII was definitely charging.  How much?  I don't know.

--Michael
Mics:  Microtech Gefell m200/M20/nBob Actives>PFA, CA-11
Pre's: USB Pre2, 1x V3, 2x V3 w/optimod, MP2, Church Ugly
Decks: SD MixPre 6 II, R44 Oade Concert Mod, M10
Playback: Grace m9xx->Sen HD 650, Fostex TH-X00, HIFIMAN HEXX
Mixing: RME Fireface UFX->Reaper/Izotope->Yamaha HS8

Offline endless_soul

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 25
Re: MT II External Power
« Reply #8 on: January 15, 2008, 09:33:43 PM »
And FWIW I've used one of those 4xAA usb battery sleds for the past year and the only time I had a problem was when I used Rayovacs instead of Duracells. The sled I got was only $3.95 from batteryspace: http://www.batteryspace.com/index.asp?PageAction=VIEWPROD&ProdID=2970

can i get one of these in the uk?
it doesnt look like i can order from that website...
x

Offline dactylus

  • Site Supporter
  • Trade Count: (62)
  • Needs to get out more...
  • *
  • Posts: 5992
  • Gender: Male
  • Maplewood, MN
Re: MT II External Power
« Reply #9 on: January 24, 2008, 09:39:25 PM »
http://www.amazon.com/gp/product/B000CGG8LW/sr=8-10/qid=1199538263/ref=pd_cp_e_1?ie=UTF8&qid=1199538263&sr=8-10&pf_rd_p=250314601&pf_rd_s=center-41&pf_rd_t=201&pf_rd_i=B000O2YOII&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=08QRZJA46ETMCX3TEC8H

Amazon.com Product Description
The Macally IP-A481 external lithium-ion battery adds hours of playtime to your iPod wherever you go. Ideal for long flights, outdoor activities, serious road trips, and a ton of other applications, the high-capacity battery provides an extra six to eight hours of power-- enough to enjoy another 100 or so songs. Connection is simple, with a port for direct connection to the iPod shuffle and a USB port for other iPod models (use the 30-pin USB sync cable that came with your iPod). And once the battery runs down, simply connect it to your computer's USB port for quick recharging. The IP-A481, which includes a built-in battery tester button and a battery-level LED indicator, works with the following iPods: 3G, 4G, 5G, iPod Photo, iPod with video, nano 1G, nano 2G, mini, and shuffle 1G.
The battery measures 2.4 by 0.6 by 4 inches (W x H x D), weighs 11.3 ounces, and carries a one- year warranty.

What's in the Box
IP-A481 battery, USB-A to USB-mini B cable, user's manual.

Product Description
Recommended for iPod shuffle, iPod 4G, iPod Photo, iPod with color display, iPod Mini, iPod nano & iPod with video / Add hours of play time to iPod device Recharge from computer's USB port convenietly with included cable Built-in battery tester button with battery level L.E.D. indicator Includes 1 USB-A to USB-mini B cable Output Voltage - DC 5V Output Current - 1000mA max. Dimension - Height 3.9 x Width 2.4 x Depth 0.6 inch Weight - 11.3 ounces


The same unit is available for less here:
http://www.newegg.com/product/product.asp?item=N82E16855998033

$34.99


That unit is what I have used and it works great...


 :headphones:

hot licks > microphones > recorder



...ball of confusion, that's what the world is today, hey hey...

Offline NOLAfishwater

  • is not taping much these days
  • Trade Count: (72)
  • Needs to get out more...
  • *****
  • Posts: 6344
  • Gender: Male
  • I LIKE FISHIN
Re: MT II External Power
« Reply #10 on: January 24, 2008, 10:18:10 PM »
The same unit is available for less here:
http://www.newegg.com/product/product.asp?item=N82E16855998033

$34.99


That unit is what I have used and it works great...


 :headphones:

Does anyone know how long this will power it for with the backlight on the whole time w/ phantom power off?

Offline silentmark

  • Shine with or without cherries ?
  • Trade Count: (5)
  • Needs to get out more...
  • *****
  • Posts: 2685
  • Gender: Male
  • Boat, cucumber, wire ...
Re: MT II External Power
« Reply #11 on: January 25, 2008, 08:56:03 AM »
Not sure on total time, but with a fully charged MT, I don't think I ever saw it lose any of the three green level lights during a regular say 3-4 hour show. I did have it drain once because my MT was not fully charged though. Oh and I always leave the backlight on when doing this and I leave it turned on during setbreaks. I would never get through a show with just the internal, even with the backlight off ...
Dissent is the highest form of patriotism. - Howard Zinn, not Thomas Jefferson ...

Mics: Neumann AK50/AK40/AK30/AK20(1 for M/S), AKG568eb's (gathering dust)
Decks: R-44 (OCM), Fostex FR2LE (OWM), Microtacker (semi-retired), D8 (retired), D7 (retired)
Pre-amps: Apogee Minime (semi-retired), Sonosax SX-M2 (semi-retired), Oade mod SBM-1 (retired)
Cables: LC3 actives (older lemo style x2), Audio Magic Hyper Conductor interconnects

http://www.youtube.com/watch?v=J3qrWOOposQ

Offline Colin Liston

  • Trade Count: (8)
  • Needs to get out more...
  • *****
  • Posts: 2345
  • Gender: Male
Re: MT II External Power
« Reply #12 on: February 25, 2008, 02:14:42 PM »
Assuming that the MT2 is the same 5v as the MT1 there are multiple external solutions & more than one thread on this.

I use this myself, works great http://www.newegg.com/Product/Product.aspx?Item=N82E16855998033

Make sure your MT is fully charged when running your external, otherwise it will drain the external fairly quickly, just an FYI ...

I got one of these late last year and it is completely dead now.  Doesn't charge and doesn't power anything up.

Anyone else have this problem?
Occasionally....music mics record

Offline dactylus

  • Site Supporter
  • Trade Count: (62)
  • Needs to get out more...
  • *
  • Posts: 5992
  • Gender: Male
  • Maplewood, MN
Re: MT II External Power
« Reply #13 on: February 27, 2008, 07:09:34 AM »
Assuming that the MT2 is the same 5v as the MT1 there are multiple external solutions & more than one thread on this.

I use this myself, works great http://www.newegg.com/Product/Product.aspx?Item=N82E16855998033

Make sure your MT is fully charged when running your external, otherwise it will drain the external fairly quickly, just an FYI ...

I got one of these late last year and it is completely dead now.  Doesn't charge and doesn't power anything up.

Anyone else have this problem?


Nope, mine still works like a champ...

hot licks > microphones > recorder



...ball of confusion, that's what the world is today, hey hey...

Offline silentmark

  • Shine with or without cherries ?
  • Trade Count: (5)
  • Needs to get out more...
  • *****
  • Posts: 2685
  • Gender: Male
  • Boat, cucumber, wire ...
Re: MT II External Power
« Reply #14 on: February 27, 2008, 07:34:00 AM »
Assuming that the MT2 is the same 5v as the MT1 there are multiple external solutions & more than one thread on this.

I use this myself, works great http://www.newegg.com/Product/Product.aspx?Item=N82E16855998033

Make sure your MT is fully charged when running your external, otherwise it will drain the external fairly quickly, just an FYI ...

I got one of these late last year and it is completely dead now.  Doesn't charge and doesn't power anything up.

Anyone else have this problem?


Nope, mine still works like a champ...



Same here, still going strong ...
Dissent is the highest form of patriotism. - Howard Zinn, not Thomas Jefferson ...

Mics: Neumann AK50/AK40/AK30/AK20(1 for M/S), AKG568eb's (gathering dust)
Decks: R-44 (OCM), Fostex FR2LE (OWM), Microtacker (semi-retired), D8 (retired), D7 (retired)
Pre-amps: Apogee Minime (semi-retired), Sonosax SX-M2 (semi-retired), Oade mod SBM-1 (retired)
Cables: LC3 actives (older lemo style x2), Audio Magic Hyper Conductor interconnects

http://www.youtube.com/watch?v=J3qrWOOposQ

Offline rav

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 8
Re: MT II External Power
« Reply #15 on: March 02, 2008, 09:26:16 PM »
Hello everybody.

What do you think of this battery pack:  http://us.kensington.com/html/13883.html  ?

Thanks in advance.

Best.

Offline NOLAfishwater

  • is not taping much these days
  • Trade Count: (72)
  • Needs to get out more...
  • *****
  • Posts: 6344
  • Gender: Male
  • I LIKE FISHIN
Re: MT II External Power
« Reply #16 on: March 03, 2008, 11:36:55 PM »
Hello everybody.

What do you think of this battery pack:  http://us.kensington.com/html/13883.html  ?

Thanks in advance.

Best.

for the price, I would go with the McAlly unit discussed earlier in the thread.

Offline rav

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 8
Re: MT II External Power
« Reply #17 on: March 05, 2008, 04:01:08 AM »
Thanks Nola,

Apart from the price, is there any difference between the McAlly and the Kensington. I´m asking cause i´m in Spain and is much easier for me to get the kensington one.

Thanks in advance.

Best.

Offline digitalcandy926

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 28
Re: MT II External Power
« Reply #18 on: April 28, 2008, 09:27:46 PM »
I use a duracell powerpack mobile 100 lithium battery which has both a regular outlet and 2 usb ports...... works great and has ran my rig for nearly 10 hours straight!!!

Offline anhisr

  • Trade Count: (6)
  • Needs to get out more...
  • Posts: 2974
  • Gender: Male
Re: MT II External Power
« Reply #19 on: April 28, 2008, 09:37:03 PM »
Taking the price out of it, I think the McAlly and the Kesington are about the same.
Audio: Neumann KM 100> 20, 30, 40, 43 or 50 > V3 > MT II (love that M/S)
Still Camera Body: Canon D5 Mark II
Canon Lenses:  16-35mm f2.8L II USM; 28-135mm f3.5-5.6 IS USM; 70-200mm f2.8L IS USM
Video Canon HF R30

archive  http://www.archive.org/bookmarks/anhisr

Offline NOLAfishwater

  • is not taping much these days
  • Trade Count: (72)
  • Needs to get out more...
  • *****
  • Posts: 6344
  • Gender: Male
  • I LIKE FISHIN
Re: MT II External Power
« Reply #20 on: May 06, 2008, 05:33:05 PM »
Taking the price out of it, I think the McAlly and the Kesington are about the same.

I agree. It the McAlly works like a charm. I can tape all night with the back light on bright and contrast on 10 and have never come close to draining the thing.

Offline JoeKiller

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 603
  • Gender: Male
  • Duo!
    • JoeKiller.com
Re: MT II External Power
« Reply #21 on: May 06, 2008, 06:27:51 PM »
I still run wally world with a seague cable.  I can run almost a whole festival off one!  6000 mAh and 5400 respectively.
spc4>mme>mt

Archive List

Offline mblindsey

  • Trade Count: (23)
  • Taperssection All-Star
  • ****
  • Posts: 1245
Re: MT II External Power
« Reply #22 on: May 06, 2008, 11:14:07 PM »
Taking the price out of it, I think the McAlly and the Kesington are about the same.

I agree. It the McAlly works like a charm. I can tape all night with the back light on bright and contrast on 10 and have never come close to draining the thing.

I finally broke down and picked up two mcally's from newegg for festival season.  I haven't used them on the MT II yet, but I have on a phone & iPod, and I'm impressed with them so far.

--Michael
Mics:  Microtech Gefell m200/M20/nBob Actives>PFA, CA-11
Pre's: USB Pre2, 1x V3, 2x V3 w/optimod, MP2, Church Ugly
Decks: SD MixPre 6 II, R44 Oade Concert Mod, M10
Playback: Grace m9xx->Sen HD 650, Fostex TH-X00, HIFIMAN HEXX
Mixing: RME Fireface UFX->Reaper/Izotope->Yamaha HS8

Offline mblindsey

  • Trade Count: (23)
  • Taperssection All-Star
  • ****
  • Posts: 1245
Re: MT II External Power
« Reply #23 on: June 03, 2008, 11:54:29 PM »

Can a standard white Apple iPod AC wall wart with the USB output be used to charge the McAlly in lieu of my PC USB port?  I don't know why it couldn't, but thought I should double check with the brain trust...

--Michael
Mics:  Microtech Gefell m200/M20/nBob Actives>PFA, CA-11
Pre's: USB Pre2, 1x V3, 2x V3 w/optimod, MP2, Church Ugly
Decks: SD MixPre 6 II, R44 Oade Concert Mod, M10
Playback: Grace m9xx->Sen HD 650, Fostex TH-X00, HIFIMAN HEXX
Mixing: RME Fireface UFX->Reaper/Izotope->Yamaha HS8

Offline silentmark

  • Shine with or without cherries ?
  • Trade Count: (5)
  • Needs to get out more...
  • *****
  • Posts: 2685
  • Gender: Male
  • Boat, cucumber, wire ...
Re: MT II External Power
« Reply #24 on: June 04, 2008, 07:41:33 AM »
Most likely. I use the wall wart that came with the MT, works like a charm ...
Dissent is the highest form of patriotism. - Howard Zinn, not Thomas Jefferson ...

Mics: Neumann AK50/AK40/AK30/AK20(1 for M/S), AKG568eb's (gathering dust)
Decks: R-44 (OCM), Fostex FR2LE (OWM), Microtacker (semi-retired), D8 (retired), D7 (retired)
Pre-amps: Apogee Minime (semi-retired), Sonosax SX-M2 (semi-retired), Oade mod SBM-1 (retired)
Cables: LC3 actives (older lemo style x2), Audio Magic Hyper Conductor interconnects

http://www.youtube.com/watch?v=J3qrWOOposQ

Offline DigitalMan

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 2
Re: MT II External Power
« Reply #25 on: June 22, 2008, 12:45:18 AM »
Great news on the Macally, I just purchased mine today for my MT1. Hopefully Newegg can deliver Thursday afternoon, taping Friday night and leaving early Friday.
DigitalMan

Offline mblindsey

  • Trade Count: (23)
  • Taperssection All-Star
  • ****
  • Posts: 1245
Re: MT II External Power
« Reply #26 on: June 22, 2008, 01:12:16 AM »
Hopefully, this is not a dupe thread.

I just wanted to show a pic of the external power I purchased at walmart for my MT II (~$9).  It is just a 4 AA sled with USB connection and an on/off switch.

I haven't used it in the field yet, but it seems okay in quick tests at home.  The MT II shows that it is being charged when the battery is plugged in.

The retractable cable that came with it only powers the MT II.  I cannot use it to transfer a file via USB.

EDIT:  ...and that USB cable that came with it fits very nicely next to the S/PDIF I bought from kindcables.com

--Michael



This thing croaked.  Not while taping, but while charging a phone.  Don't buy one.

--Michael
Mics:  Microtech Gefell m200/M20/nBob Actives>PFA, CA-11
Pre's: USB Pre2, 1x V3, 2x V3 w/optimod, MP2, Church Ugly
Decks: SD MixPre 6 II, R44 Oade Concert Mod, M10
Playback: Grace m9xx->Sen HD 650, Fostex TH-X00, HIFIMAN HEXX
Mixing: RME Fireface UFX->Reaper/Izotope->Yamaha HS8

Offline ToddL

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 17
  • I feel more like I did a while ago than I do now.
Re: MT II External Power
« Reply #27 on: July 30, 2008, 02:16:33 PM »
I use a duracell powerpack mobile 100 lithium battery which has both a regular outlet and 2 usb ports...... works great and has ran my rig for nearly 10 hours straight!!!

Do you guys think that you could power an MT2 out of the USB and a v3 out of the socket output on this at the same time?  Any idea of runtime that you'd get doing this with phantom power on? 

 

RSS | Mobile
Page created in 0.125 seconds with 56 queries.
© 2002-2024 Taperssection.com
Powered by SMF