Become a Site Supporter and Never see Ads again!

Author Topic: Cleaning capsule/body connections??  (Read 6276 times)

0 Members and 1 Guest are viewing this topic.

Offline mfh2014

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 145
  • Gender: Male
  • Rock
    • bigherm
Cleaning capsule/body connections??
« on: August 01, 2003, 11:56:50 PM »
Hey all...what is kosher and what is not kosher to clean with isopropyl and swabs...the male xlr connectors looks a bit dirty...seems harmless to clean these..bit what about the cap/body connection area...seems more delicate...thanks for the advice

SHKDWN

  • Guest
  • Trade Count: (0)
Re:Cleaning capsule/body connections??
« Reply #1 on: August 02, 2003, 11:26:43 AM »
I just cleaned everything with alcohol and swabs and had no problems after the clean.   I asked the same question recently, and all the responses were alcohol and swabs

Offline Lee

  • Team Bama
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 4868
  • Gender: Male
  • "I hate the f***in' eagles, man!"
Re:Cleaning capsule/body connections??
« Reply #2 on: August 02, 2003, 11:50:15 AM »
as long as it's isopropyl you shouldn't have a problem.
Denon AVR 3808ci > Paradigm Reference Studio 20 + Velodyne DLS 3750

Offline Simp-Dawg

  • Bad Little Dawggie
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 15077
  • Gender: Male
  • Daddy needs a drink!
    • Colorado Tapers
Re:Cleaning capsule/body connections??
« Reply #3 on: August 05, 2003, 01:25:21 PM »
can't i just dip them in my jack and coke?  that's alcohol...
;)
CO Crüe Benchwarmer

Playback: Denon DVD-2910 > Denon AVR-3806 > Segue Doghouse Speaker Cable > B&W DM-610i / Klipsch RW-10 Subwoofer

Offline Lee

  • Team Bama
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 4868
  • Gender: Male
  • "I hate the f***in' eagles, man!"
Re:Cleaning capsule/body connections??
« Reply #4 on: August 05, 2003, 03:52:32 PM »
can't i just dip them in my jack and coke?  that's alcohol...
;)

Denon AVR 3808ci > Paradigm Reference Studio 20 + Velodyne DLS 3750

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re:Cleaning capsule/body connections??
« Reply #5 on: August 08, 2003, 03:00:53 PM »
can't i just dip them in my jack and coke?  that's alcohol...
;)

 8) 8)
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline sexymexi

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1777
  • Gender: Male
    • show list
Re:Cleaning capsule/body connections??
« Reply #6 on: August 11, 2003, 08:10:51 PM »
if you can find it, they make contact cleaner in aerosol cans...  used that on guitar potentiometers.. i don't know where to get it, its liquid stuff that comes out, probably isopropyl.. i don't know my buddy that runs a studio uses it on everything...
AKG 391's > phantom boxes > JB3 or Casio DA-7
Panasonic WM1610 omni's > whatever

Playback: Soundblaster Audigy 2 ZS Platinum > Onkyo TSDX595 > matched Oynix Rockets > Mirage FRX-S8 sub

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re:Cleaning capsule/body connections??
« Reply #7 on: August 11, 2003, 10:49:46 PM »
or just use duster... 8)
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline zhianosatch

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8992
  • Gender: Male
  • god-damned hippies!
Re:Cleaning capsule/body connections??
« Reply #8 on: August 11, 2003, 11:10:15 PM »
Why not use butyl acohol? That would make your mics smell really sweet... if you dig the smell of baby shit...

Offline creekfreak

  • Retired from taping
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8087
  • Gender: Male
  • My Son's School Bus
    • Rochester Groove
Re:Cleaning capsule/body connections??
« Reply #9 on: August 18, 2003, 02:10:03 PM »
I put mine in the dishwasher ;D
It is company policy never to imply ownership in the event of a dildo - We have to use the indefinite article; "A" dildo, never: "YOUR" dildo.
In Tyler we Trust

And isn't sanity really just a one-trick pony anyway? I mean all you get is one trick, rational thinking, but when you're good and crazy, ooh ooh ooh, the sky is the limit!

My Current Rig:2004 Subaru WRX STI, Stage 3, 360hp, 380lb-ft

Offline macroint

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 4373
  • Gender: Male
    • Jeff's List
Re:Cleaning capsule/body connections??
« Reply #10 on: October 14, 2004, 01:50:02 AM »
  I taped my first show Tuesday night...local Baltimore band called KOE. I think everything fell into place and I came away with a nice recording.

  Tested my luck Wednesday night (just got back) with Dark Star Orchestra. The batteries the PS-2 tanked about 25 minutes into the second set and, while packing up at the end, some chick decided to rather than drink the last of her beer, she'd dump it in my case. I think (or I hope) I took the brunt of it, but my NJB3 and PS-2 took a direct hit. I hadn't put my mics away yet, so the card caps were spared...but the case I designed (actually stole whole design from Terry Watts' friend) has the omni caps in full view. Not sure if they got hit, but the area around them did. What kind of damage could I be looking at if a drop or two of Bud Light (she couldn't have chosen a Pale Ale?) got in the caps?


jeff
Peluso CEMC6>PS-2>AD-20>NJB3


SUPPORT LOCAL MUSIC
http://baltimore-taper.blogspot.com

Offline Lil Kim Jong-Il

  • Trade Count: (6)
  • Needs to get out more...
  • *****
  • Posts: 6498
  • large Marge sent me
Re:Cleaning capsule/body connections??
« Reply #11 on: October 14, 2004, 02:26:07 AM »
  I taped my first show Tuesday night...local Baltimore band called KOE. I think everything fell into place and I came away with a nice recording.

  Tested my luck Wednesday night (just got back) with Dark Star Orchestra. The batteries the PS-2 tanked about 25 minutes into the second set and, while packing up at the end, some chick decided to rather than drink the last of her beer, she'd dump it in my case. I think (or I hope) I took the brunt of it, but my NJB3 and PS-2 took a direct hit. I hadn't put my mics away yet, so the card caps were spared...but the case I designed (actually stole whole design from Terry Watts' friend) has the omni caps in full view. Not sure if they got hit, but the area around them did. What kind of damage could I be looking at if a drop or two of Bud Light (she couldn't have chosen a Pale Ale?) got in the caps?


jeff

Foam windscreens come in handy at bars.  Keeps smoke and incidental liquids off your mics. 

If it was just a drop, it probably got caught in the screen that protects the capsule.  Just gently blot the screen to remove the spill but don't push the liquid behind the screen.  You can wipe it with a damp (not moist) cloth to remove the beer from the screen.  Dont use a wet cloth, you don't want water/humidity in there.  Let them air dry.   If you get a layer of filth and nicotine on the capsules, it will affect the sound.  Worst case, you send them in for service and a cleaning.

If the place that you are taping is a zoo, get some 2mil clear plastic drop cloth and cut it into 4x4 sheets that you can drape over your bag.  You'll be able to see meters and press buttons through the plastic and it will keep spills out of your bag.  Check out the threads about taping in the rain.

If you are going to carry around all your caps, you should get some plastic cases specificly to keep the extra caps protected.  I don't know what you are running but if you look on ebay there are often the protective plastic cases for schoeps capsules.  Those might work for you.  Or you can try some film canisters with a DIY foam lining. 

To bad about the batteries.  Mule and Galactic shows are coming to 930 club.  So try again ;-).
The first rule of amateur neurosurgery club is .... I forget.

 

RSS | Mobile
Page created in 0.092 seconds with 37 queries.
© 2002-2024 Taperssection.com
Powered by SMF