Taperssection.com

Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: save on August 06, 2004, 07:24:46 PM

Title: psp-2 question...
Post by: save on August 06, 2004, 07:24:46 PM

i searched the archives and found most of my anwsers but i've still got one  i didn't find an anwser for.  on the front of it just right of the on/off switch it has left mic/line & right mic/line.  mine was set to mic when i got it and i tested it out in front of my speakers and got pretty good levels.  do i need to worry about brickwalling this unit running it mic in?

thanks,
justin

Title: Re: psp-2 question...
Post by: marc0789 on August 09, 2004, 10:01:45 AM

no, never, as long as you make sure gain is at zero, and mic sens is -35. Any higher and you might have problems. roughly generalized, this setting is around 20-25 db's of gain, not gonna ever be a problem.

Title: Re: psp-2 question...
Post by: save on August 09, 2004, 06:34:32 PM

thanks for clearing that up for me marc, +T

Title: Re: psp-2 question...
Post by: marc0789 on August 16, 2004, 12:10:45 PM

backatcha, +t for running a killer pre. neck and neck with the 148 as my very favorites.