Become a Site Supporter and Never see Ads again!

Author Topic: I want to Power my Lunatec V3 with AA's  (Read 7640 times)

0 Members and 1 Guest are viewing this topic.

Offline Gutbucket

  • record > listen > revise technique
  • Trade Count: (15)
  • Needs to get out more...
  • *****
  • Posts: 15700
  • Gender: Male
  • "Better to love music than respect it" ~Stravinsky
Re: I want to Power my Lunatec V3 with AA's
« Reply #15 on: March 03, 2020, 01:08:41 PM »
Short version:  Simplest approach is to keep it set for 6V operation for operation with supply voltages from 6-15VDC.  The unit will run somewhat hotter at higher voltages.
musical volition > vibrations > voltages > numeric values > voltages > vibrations> virtual teleportation time-machine experience
Better recording made easy - >>Improved PAS table<< | Made excellent- >>click here to download the Oddball Microphone Technique illustrated PDF booklet<< (note: This is a 1st draft, now several years old and in need of revision!  Stay tuned)

Offline steve4134

  • Trade Count: (5)
  • Taperssection Member
  • ***
  • Posts: 419
  • Gender: Male
Re: I want to Power my Lunatec V3 with AA's
« Reply #16 on: March 03, 2020, 11:15:12 PM »
Great information.

Thanks everyone

Steve
Mc-930-Naiant Littlebox-R-09HR

Offline jerryfreak

  • No PZ
  • Trade Count: (31)
  • Needs to get out more...
  • *
  • Posts: 6205
  • The plural of anecdote is not data
Re: I want to Power my Lunatec V3 with AA's
« Reply #17 on: March 03, 2020, 11:29:24 PM »
I keep this thread bookmarked just in case:

https://taperssection.com/index.php?topic=178778.0;all

but I have never changed the jumpers on my V3. Is it really just going to affect the battery meter and shutoff voltage? Doesn't seem like it if running 6v would make it run cooler.

what fsulloway was using there are basically the same L-series sleds i linked (his was hacked with a custom cable form a charger, the one i linked is build to do that)

again a great cheap option in the proper voltage range. the Li-ions peter out right around 6.0V, so you get good use of them
Unable to post or PM due to arbitrary censorship of people the mod doesn't like. Please email me using the link in my profile if you need to connect

 

RSS | Mobile
Page created in 0.069 seconds with 29 queries.
© 2002-2024 Taperssection.com
Powered by SMF