Become a Site Supporter and Never see Ads again!

Author Topic: Manfrotto 649 Clamp Repair  (Read 1201 times)

0 Members and 1 Guest are viewing this topic.

Offline DavidPuddy

  • Trade Count: (15)
  • Taperssection All-Star
  • ****
  • Posts: 1483
Manfrotto 649 Clamp Repair
« on: March 26, 2021, 03:59:46 PM »
Looks like the brass disc part (that contacts the bottom of the clamped surface) of my 649 clamp tore off at the last show. Anyone have any ideas on how to repair it? It seems like it was held on by a cheap rivet, which is another story on a $70 clamp... :angry3: Also Manfrotto USA said they cannot repair it.

https://ibb.co/3NbjKXc

Here's what it's supposed to look like:

https://images-na.ssl-images-amazon.com/images/I/51a3CJ6%2BQLL._AC_SL1200_.jpg

The only thing I can think of is a brass or stainless disk with a hole in the middle that matches the diameter of the screw top. Also, the disk needs to be able to freely spin. I don't have a shop though, so that compounds the issue.
« Last Edit: March 26, 2021, 04:15:31 PM by DavidPuddy »

Offline EmRR

  • Trade Count: (5)
  • Taperssection Member
  • ***
  • Posts: 718
    • ElectroMagnetic Radiation Recorders
Re: Manfrotto 649 Clamp Repair
« Reply #1 on: March 26, 2021, 04:52:02 PM »
Improvise a piece you have to manually put in place each time?   Maybe the only option.    A rubber puck with a metal cup would be ideal.
Mics: DPA 4060 w/MPS 6030 PSU/DAD6001/DAD4099, Neumann KM 131, Oktava MK 012, Sennheiser MKH 105, MKH 20, MKH 30, MKH 40, MKH 800 TWIN
Recorders: Zoom F8n, Sony MZ-R50

Offline mattmiller

  • Trade Count: (20)
  • Taperssection All-Star
  • ****
  • Posts: 1453
  • Gender: Male
Re: Manfrotto 649 Clamp Repair
« Reply #2 on: April 29, 2021, 09:38:11 AM »
I have this clamp, though haven't used it in a while so I'm going off of memory here, but why does your proposed disk need to be able to freely spin?  I recall placing one of those round adhesive rubber disks on mine to soften the impact on the underside of whatever I'm clamping to.  In your situation, would it work to drill the bottom out of a rubber stopper and epoxy it over top of the part that's protruding from the threads?
Mics: Neumann KM100 (x4), AK40 (x2), AK50 (x2)
Pre: Lunatec V3
Recorders: Tascam DR-680, Tascam HD-P2 (x2), Sony PCM-M10

Offline morst

  • Trade Unionist
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 5168
Re: Manfrotto 649 Clamp Repair
« Reply #3 on: April 29, 2021, 01:07:08 PM »
The only thing I can think of is a brass or stainless disk with a hole in the middle that matches the diameter of the screw top.
Random rubber knob from some busted appliance might fit. I think there's a thread about replacing that thing on a different clamp, and someone found the perfect part...
Ah, it's an air cap for a tire.

I found a great replacement for the screw top of a Windtech MPC clamp.The soft cap on top of a 4 foot driveway/plow marker.  Those orange or yellow hi-vis, thin staffs, probably near the mailbox numbers in your local Lowes/Home Depot.
First few uses, they work great.After about 5, the screw wears through the tip.Derp.
The screw on cap for air valve stems for auto tires works for me.
« Last Edit: April 29, 2021, 01:09:32 PM by morst »

Offline DavidPuddy

  • Trade Count: (15)
  • Taperssection All-Star
  • ****
  • Posts: 1483
Re: Manfrotto 649 Clamp Repair
« Reply #4 on: April 29, 2021, 03:38:02 PM »
I was trying to replace it with a like part...I was able to find some used ones (they never come up for sale used) so the broken one has been relegated to the parts bin. Thanks all

 

RSS | Mobile
Page created in 0.032 seconds with 28 queries.
© 2002-2022 Taperssection.com
Powered by SMF