Become a Site Supporter and Never see Ads again!

Author Topic: KORG MR-1 External Power Source  (Read 20718 times)

0 Members and 1 Guest are viewing this topic.

Offline H₂O

  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 5745
  • Gender: Male
KORG MR-1 External Power Source
« on: July 06, 2007, 06:08:20 PM »
I am going to hook up my new MR-1 to an external battery.  Does anyone know the connector size?

Also does any one know how many mA's or Amp's it will pull on the 5volt power jack?  In the manual it says it draws 2.15 Watts (which I calc to 0.430 Amps at 5 Volts) but does this value take into count any additional current draw from charging the onboard battery?


I want to understand the battery life I can expect and to see what my total current draw against my battery will be.

Also the AC  PS included with the KORG is rated up to 2.4 Amps and I want to make sure the KORG doesn't pull this kind of current when connected to my battery.

I will be using a custom battery setup I have been using for years with a pair of adjustable linear volatge regulators (outputs two seperate regulated voltages from one high voltage battery).   The manufacturer of the battery I have suggests to keep the total current draw under 2 Amps.  I will  also be running a PSP2, which I am pretty sure only pulls between 300 - 500 mA's.

« Last Edit: July 06, 2007, 06:22:45 PM by campbrs »
Music can at the least least explain you and at the most expand you
LMA Recordings

List

Offline H₂O

  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 5745
  • Gender: Male
Re: KORG MR-1 External Power Source
« Reply #1 on: July 07, 2007, 04:24:23 PM »
The MR-1 Power connector looks like a EIAJ-02 (or Philmore 240 plug/TC240 cord/207 PC jack).  This is the same connector as used on the Sony TCD-D7/8, M1, and D100 - BUT NOT THE SAME VOLTAGE - SO DON'T TRY AND RUN YOUR MR-1 ON A D8 or M1 external battery.


An interesting article on the EIAJ connectors can be found here:
http://en.wikipedia.org/wiki/EIAJ_connector

Also I noticed the PS output is 5.2 V but the unit will run off 5.0 V.  Is there a set voltage where the battery charges (i.e. 5.2 V)?   So if youwhere to run at 5.0 V would it not charge the battery?

« Last Edit: July 07, 2007, 04:28:23 PM by campbrs »
Music can at the least least explain you and at the most expand you
LMA Recordings

List

Offline H₂O

  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 5745
  • Gender: Male
Re: KORG MR-1 External Power Source
« Reply #2 on: July 07, 2007, 09:46:24 PM »
Well all looks good for me. I was able to run the MR-1 at 5.08 Volts for 5 hours recording DSD on my battery setup and the battery only dropped about 25%. 

Based on my observations I would guess the current draw of under 0.5 Amps is pretty accurate.

Note the onboard battery was fully charged so it did not need to be recharged.
Music can at the least least explain you and at the most expand you
LMA Recordings

List

Offline H₂O

  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 5745
  • Gender: Male
Re: KORG MR-1 External Power Source
« Reply #3 on: July 08, 2007, 10:07:11 PM »
Well now it doesn't look so good as the MR-1 died on me today on my setup.  I think the culpret is the power connector I am using as it is not an exact match to the Korg's (even though it is spec'd the same).

So off to Radio Shack tommorrow.
Music can at the least least explain you and at the most expand you
LMA Recordings

List

Offline mwz

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 311
  • Gender: Male
Re: KORG MR-1 External Power Source
« Reply #4 on: July 08, 2007, 11:17:20 PM »
my power runner pr2300 has a plug that seems to fit just about right - pulled a nice 4061 > mma600 > mr1 last week.

Offline H₂O

  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 5745
  • Gender: Male
Re: KORG MR-1 External Power Source
« Reply #5 on: July 09, 2007, 09:23:31 PM »
Thanks for the input mwz. +T

I was able to get this working with my battery finally and with the original connector cable I made many moons ago for my D8.  It appears my battery connector (the connector to the battery) was loose (idiot :) ).   My battery is now working and actually charging the unit.

One issue I did find through all this that when running the MR-1 and PSP-2 off the same power source a grounding issue may occur.  When I run both on the same battery and connect a from the mini of the PSP-2 to the 2 mini's of the MR-1 the PSP-2 will power on with out being turned on.   This will not happen if I run both off seperate external power sources.

So now I am resorting to using internal batteries in the PSP-2.  I have run it this way many times in the past but my PSP-2 battery slide is about as reliable as an AD1000 with a failing clock.  If the contacts aren't exactly positioned the PSP won't power on.
« Last Edit: July 09, 2007, 09:27:01 PM by campbrs »
Music can at the least least explain you and at the most expand you
LMA Recordings

List

Offline gmm6797

  • Trade Count: (10)
  • Needs to get out more...
  • *****
  • Posts: 3591
  • Gender: Male
  • Schoeps MK4 > nBoxPlat > Sony A10/SDMixPre6/SD 722
    • Homepage
Re: KORG MR-1 External Power Source
« Reply #6 on: July 10, 2007, 01:53:49 PM »
Ill admit I know next to nothing about the power stuff, so I follow these threads to a T to make sure I dont fry anything.

Any other suggestions other than the power runner pr2300 set to 5v?

I guess the USB port is just for data transfer and can not be used as a power source?

TIA

Offline bdasilva

  • Trade Count: (12)
  • Taperssection All-Star
  • ****
  • Posts: 1358
  • Gender: Male
  • Use to be a Fishhead
Re: KORG MR-1 External Power Source
« Reply #7 on: July 10, 2007, 03:00:59 PM »
Yes.. the USB is only for data. When you're out of battery it will turn off, plugged in to the usb or not.

Power talk now... I'm going to put together a LM7805 regulator circuit. This will take my 9v battery and regulate it down to the 5vdc we need at an amp max.  I have measured the current draw and this should be enough. The JB3  did draw slightly more current and did have current "spikes" and the 7805 (with caps on the output and a good heatsink) worked fine.  I'll let you know.
Cad E300S set.. AT822  AKG C 414 B-XLS/ST  
Dorsey-Mod MK-012 w/ O, C, H and RED L/D Caps
Superlux S502 ORTF   LSD2
Silverpath  Cables> 
Tascam DR-680MKii    DR- 680 (X2)   Tascam DR-40     Sound Devices USBPre    SONY  PMD-M10   Zoom F8

"Buy a Taper a Drink... Prime the Pumps of live Music"


               On the "music" side of the "Music Business"

Offline gmm6797

  • Trade Count: (10)
  • Needs to get out more...
  • *****
  • Posts: 3591
  • Gender: Male
  • Schoeps MK4 > nBoxPlat > Sony A10/SDMixPre6/SD 722
    • Homepage
Re: KORG MR-1 External Power Source
« Reply #8 on: July 10, 2007, 03:38:08 PM »
I have a home made (from a friend, not by my hand) converter that takes the Wally World DVD battery down for a MicroTracker voltage (which I am told is the same as the JB3)... could this work with the MR1 if I change the connector on the end out from a USB (or better yet, add an additional output cable)?


Offline H₂O

  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 5745
  • Gender: Male
Re: KORG MR-1 External Power Source
« Reply #9 on: July 10, 2007, 03:56:17 PM »
I use a LM431ACZ-ND VR which handles upto 3A and can be built to be adjustable.  I have a box with 2 (and very large heat sinks) so this allows me to hook up any voltage (a few volts higher then the voltage I am trying to match) and output 2 seperate voltages at any lower voltage using 2 pots (1 per VR).

http://www.alldatasheet.com/datasheet-pdf/pdf/112285/NSC/LM431ACZ.html

I have CAPs and protection diodes soldered in as well.

Music can at the least least explain you and at the most expand you
LMA Recordings

List

Offline Nick's Picks

  • Trade Count: (33)
  • Needs to get out more...
  • *****
  • Posts: 10260
  • Gender: Male
  • I thought I heard.......
Re: KORG MR-1 External Power Source
« Reply #10 on: July 10, 2007, 04:43:58 PM »
its draw is too heavy to use a 5v VR, that much I know. 
I also use a pr battery to great affect.

Offline H₂O

  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 5745
  • Gender: Male
Re: KORG MR-1 External Power Source
« Reply #11 on: July 11, 2007, 02:48:49 PM »
its draw is too heavy to use a 5v VR, that much I know. 

What regulator did you try and use?
Music can at the least least explain you and at the most expand you
LMA Recordings

List

Offline Nick's Picks

  • Trade Count: (33)
  • Needs to get out more...
  • *****
  • Posts: 10260
  • Gender: Male
  • I thought I heard.......
Re: KORG MR-1 External Power Source
« Reply #12 on: July 11, 2007, 04:46:33 PM »
uuuhhh...., the wrong one?  I guess.
I can't recall the part, but its the common RS one I always use for other 5v devices.
1705?

Offline SmokinJoe

  • Trade Count: (63)
  • Needs to get out more...
  • *****
  • Posts: 4210
  • Gender: Male
  • "75 and sunny"... life is so much simpler.
    • uploads to archive.org
Re: KORG MR-1 External Power Source
« Reply #13 on: July 11, 2007, 06:37:44 PM »
I believe it's OK to hook up a couple of 7805's in parallel... so then you have twice the capacity.  In theory anyway.  I'm quite sure I read that somewhere... never tried it myself.
Mics: Schoeps MK4 & CMC5's / Gefell M200's & M210's / ADK-TL / DPA4061's
Pres: V3 / ST9100
Decks: Oade Concert Mod R4Pro / R09 / R05
Photo: Nikon D700's, 2.8 Zooms, and Zeiss primes
Playback: Raspberry Pi > Modi2 Uber > Magni2 > HD650

Offline bdasilva

  • Trade Count: (12)
  • Taperssection All-Star
  • ****
  • Posts: 1358
  • Gender: Male
  • Use to be a Fishhead
Re: KORG MR-1 External Power Source
« Reply #14 on: July 11, 2007, 07:11:02 PM »
"I believe it's OK to hook up a couple of 7805's in parallel... so then you have twice the capacity.  In theory anyway.  I'm quite sure I read that somewhere... never tried it myself."

Google that and they all say "Bozo NoNo" 

Doing a test with a 7850 (to220 package) and IF the unit is charged when you start and IF you have a heatsink big enough it works fine. stays warm though.  Power in to the circuit draws 500ma (sitting on the table) and 700ma when it is recording This is all still within the 7805 specs.       I may build a LM2675-5 circuit and try that.

The test continues..
« Last Edit: July 11, 2007, 07:17:15 PM by bdasilva »
Cad E300S set.. AT822  AKG C 414 B-XLS/ST  
Dorsey-Mod MK-012 w/ O, C, H and RED L/D Caps
Superlux S502 ORTF   LSD2
Silverpath  Cables> 
Tascam DR-680MKii    DR- 680 (X2)   Tascam DR-40     Sound Devices USBPre    SONY  PMD-M10   Zoom F8

"Buy a Taper a Drink... Prime the Pumps of live Music"


               On the "music" side of the "Music Business"

 

RSS | Mobile
Page created in 0.077 seconds with 39 queries.
© 2002-2024 Taperssection.com
Powered by SMF