Become a Site Supporter and Never see Ads again!

Author Topic: How hot do you run your MiniMe?  (Read 2283 times)

0 Members and 1 Guest are viewing this topic.

Offline NOLAfishwater

  • is not taping much these days
  • Trade Count: (72)
  • Needs to get out more...
  • *****
  • Posts: 6344
  • Gender: Male
  • I LIKE FISHIN
How hot do you run your MiniMe?
« on: April 30, 2008, 02:54:01 PM »
I just got one today and did a dry run in the living room AKG414>MiniMe>MTII

What I found is that running it in the green with an occasional yellow light seems to work. How do you run yours?

Do you ever run the SL or the SLC?

Curve 1, 2, or 3?

Help please.

stirinthesauce

  • Guest
  • Trade Count: (0)
Re: How hot do you run your MiniMe?
« Reply #1 on: May 01, 2008, 12:02:05 AM »
no curve, no slc.  Just do the soft limit.  It kicks in at -4 and slightly rounds off to -2.  I prefer to keep my levels at around -9 to -6 (I monitor on my p2) but the soft limit has saved my butt with over anxious bass players laying bombs or the soundguy thinking he is being funny. 

Offline jlykos

  • Trade Count: (6)
  • Needs to get out more...
  • *****
  • Posts: 4416
  • Gender: Male
  • Don't sweat the technique
Re: How hot do you run your MiniMe?
« Reply #2 on: May 02, 2008, 01:14:46 AM »
I never use the curves or the soft limit; I just run it normally.  I usually have it bouncing yellow, and if it bounces up to red once or twice in the show, it will not kill me.  The MiniMe can take one hell of a hot signal without clipping.  I find that I really don't need a lot of gain with it, but it depends on the show.  For large shows in the sheds, I will have the knobs at about 9:00; for smaller club shows, it goes up to about 11:00, but it all depends.
dpa 4061 > Church Audio 9200 > Sony PCM-D50 (Moon Audio Silver Dragon v3 interconnect)

"I have no views," Mickey Melchiondo, known as Dean Ween, said in a philosophical moment. "I am way too stupid. I have no strong feelings about anything. I'm really into television and the computer. I believe everything I see on TV and read on the Internet."

Offline OOK

  • Trade Count: (17)
  • Needs to get out more...
  • *****
  • Posts: 2727
  • Gender: Male
  • formerly OtherOneK
Re: How hot do you run your MiniMe?
« Reply #3 on: May 02, 2008, 11:49:30 AM »
I just got one today and did a dry run in the living room AKG414>MiniMe>MTII

What I found is that running it in the green with an occasional yellow light seems to work. How do you run yours?

Do you ever run the SL or the SLC?

Curve 1, 2, or 3?

Help please.

I used a minime for a long time and sold it......I miss it terribly...but thats another story.....anyway I always ran the soft limit and ran levels hot on my deck....I had them peak between 6 and 4.  The limit is super soft....I never heard it engage, but I know that it did on many ocassions.  The curves add compression into the mix.  Its not something you are ever really going to use, unless its soft acoustic music that needs a little bump.  I never used it.  For concert purposes you will likley never use it.  hope this helps...
Peace   OOK ;D
DPA/HEB 4060's > R09HR
MBHO648/KA100Lk/KA200/KA300/KA500 > SD702

Offline JoeKiller

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 603
  • Gender: Male
  • Duo!
    • JoeKiller.com
Re: How hot do you run your MiniMe?
« Reply #4 on: May 02, 2008, 11:56:55 AM »
If I'm feeling lazy or the sound is unpredictable I'll go with the soft limit.  Never run anything beyond that.  I like to have full green on the bottom and the middle blipping.  Yellows at the highs.  How's that for technical!
spc4>mme>mt

Archive List

Offline rowjimmy

  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 2175
  • Gender: Male
  • rowjimmy.com
    • Row Knows
Re: How hot do you run your MiniMe?
« Reply #5 on: May 02, 2008, 08:13:04 PM »
I borrowed a schoeps mk21>cmc6>mini-me rig a while back. The advice from the owner was to run it HOT. First outing, I ran it conservative, never allowing it to hit a red... The recording had a ton of headroom. Next time I let it peak in the reds and the result was great.

Naturally, YMMV.
Bandcamp | Host of The Brokedown Podcast
mic > wires > recorder

Offline silentmark

  • Shine with or without cherries ?
  • Trade Count: (5)
  • Needs to get out more...
  • *****
  • Posts: 2685
  • Gender: Male
  • Boat, cucumber, wire ...
Re: How hot do you run your MiniMe?
« Reply #6 on: May 06, 2008, 03:53:58 PM »
Flickering yellow and you are set, of course YMMV ...
Dissent is the highest form of patriotism. - Howard Zinn, not Thomas Jefferson ...

Mics: Neumann AK50/AK40/AK30/AK20(1 for M/S), AKG568eb's (gathering dust)
Decks: R-44 (OCM), Fostex FR2LE (OWM), Microtacker (semi-retired), D8 (retired), D7 (retired)
Pre-amps: Apogee Minime (semi-retired), Sonosax SX-M2 (semi-retired), Oade mod SBM-1 (retired)
Cables: LC3 actives (older lemo style x2), Audio Magic Hyper Conductor interconnects

http://www.youtube.com/watch?v=J3qrWOOposQ

Offline JoeKiller

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 603
  • Gender: Male
  • Duo!
    • JoeKiller.com
Re: How hot do you run your MiniMe?
« Reply #7 on: May 06, 2008, 06:34:06 PM »
i love u flickering yellow, so juicy.
spc4>mme>mt

Archive List

 

RSS | Mobile
Page created in 0.148 seconds with 32 queries.
© 2002-2024 Taperssection.com
Powered by SMF