Taperssection.com

Gear / Technical Help => Ask The Tapers => Topic started by: manida on February 08, 2020, 01:26:00 AM

Title: Dr60DmkII--all levels peaked for no reason
Post by: manida on February 08, 2020, 01:26:00 AM

Baffled over here.  I dont even have anything plugged in and all levels are just peaked.  Im sitting in a silent house.  Gain is set to low on all inputs. 

Am I missing something obvious?  (probably!)

Title: Re: Dr60DmkII--all levels peaked for no reason
Post by: kasu64 on February 08, 2020, 03:53:47 AM

Hi Manida.

Are Mics connected and opened ?
Or are other line input ?

Bests regards

Title: Re: Dr60DmkII--all levels peaked for no reason
Post by: manida on February 08, 2020, 10:29:33 AM

nothing plugged in

Title: Re: Dr60DmkII--all levels peaked for no reason
Post by: mnm207 on February 08, 2020, 11:08:32 AM

Have you turned on the slate tone? Pages 51 and 52 of the manual have more info on this and the auto tone function.
 

Title: Re: Dr60DmkII--all levels peaked for no reason
Post by: buckster on February 08, 2020, 12:16:59 PM

If all else fails, you can also drill down through the menu and "Initialize" to restore the unit to factory settings. 

Title: Re: Dr60DmkII--all levels peaked for no reason
Post by: manida on February 08, 2020, 03:37:20 PM

I may be too dumb for this.  Slate is currently disabled, it is highlighted when enabled. 

Just turned the unit back on and all appears to be fine....until next time.