Taperssection.com

Gear / Technical Help => Microphones & Setup => Topic started by: caymanreview on July 14, 2003, 12:52:12 AM

Title: 391's and bluegrass?
Post by: caymanreview on July 14, 2003, 12:52:12 AM

if you saw my post on the open forum you know i will be doing alot of bluegrass recording in the near future ;D

where would i want to be setup for this, up close- on stage? or what? im not sure on what amplification they have or if they are using a house system

the first 3 shows will be at the lincol stage at the illinois state fair

il be running Akg 391s > PS2 > Hosa MIT 176 transformers w/ rca upgrade > ModSbm1 > m1

Title: Re:391's and bluegrass?
Post by: John R on July 14, 2003, 01:32:47 AM

right in front of the sbd.  if it's the state fair, they'll probably have a decent pa.

jr

Title: Re:391's and bluegrass?
Post by: caymanreview on July 14, 2003, 01:35:27 AM

im not sure if there will be a board out front like at a regular show or off to the side or anything

you think i should get some distance beetween me and the band?

Title: Re:391's and bluegrass?
Post by: John R on July 14, 2003, 02:09:42 AM

personally i'd get out 50-70 ft and run nutter.

jr

Title: Re:391's and bluegrass?
Post by: caymanreview on July 14, 2003, 02:13:01 AM

hmmm, never thought about that

i guess il have to wait and see the situation before i decide 8)