Taperssection.com
Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: Nick's Picks on March 03, 2010, 11:24:15 AM
-
Hey all..
I'm in search of a picture of the inside of a Denecke AD-20 / Zefiro Inbox.
Specifically, the info I need to see is the pinout of the XLR inputs in relation to the computer cable that is used to go from there into the PCB. its a 10pin square plug. 6 of those were for Left/Right input, two were 9v DC power from the battery terminals, and two more were for the low bat light or something.
I need that pinout !!!!
:banging head:
a solid picture of the inside, where by I can see where pin 1 is going?
or if someone wants to crack it open and have a peak and report back ??? Its a 3 screw lid. off and back on in seconds.
Thanks...
-
If pin1 is the red stripe, it goes to the negative terminal of the battery.
2 - battery positive
3 - left xlr housing
4 - rt xlr housing
5 - rt xlr pin 1
6 - rt xlr pin 3
7 - rt xlr pin 2
8 - left xlr pin 1
9 - left xlr pin 3
10- left xlr pin 2
< edited to add 2-10; hope that's what you need, if not I'll dig out the digicam >
-
excellent !
thank you