Become a Site Supporter and Never see Ads again!

Author Topic: Building a Battery Box  (Read 3820 times)

0 Members and 1 Guest are viewing this topic.

backwhereubelong

  • Guest
  • Trade Count: (0)
Building a Battery Box
« on: September 19, 2014, 10:47:00 PM »
I purchased one of those battery box kits from Jon (@ Naiant) and had a BLAST assembling it!  It works very nicely (I followed his directions to the letter) ... and it has me looking at some of the other battery boxes I have.  I was thinking about building one from "Scratch" and I saw this assembly.  Any advice as to what the pieces are?  It looks fairly simple ... This particular box has a bass roll-off (which I would prefer the one I build not have) ...

Any help identifying the pieces would be cool.  Which piece do I substitute (or leave out) so it will not roll off anything.

« Last Edit: September 19, 2014, 10:51:50 PM by backwhereubelong »

backwhereubelong

  • Guest
  • Trade Count: (0)
Re: Building a Battery Box
« Reply #1 on: September 20, 2014, 12:13:07 AM »
The box I opened up and looked at is a Giant Squid Battery Box ...

http://www.giantsquidaudiolab.com/gs/gs-batterybox.html

Offline DSatz

  • Site Supporter
  • Trade Count: (35)
  • Needs to get out more...
  • *
  • Posts: 3347
  • Gender: Male
Re: Building a Battery Box
« Reply #2 on: October 04, 2014, 03:42:08 PM »
Jon--watch out for an off-by-one error ...

--best regards
music > microphones > a recorder of some sort

Offline DSatz

  • Site Supporter
  • Trade Count: (35)
  • Needs to get out more...
  • *
  • Posts: 3347
  • Gender: Male
Re: Building a Battery Box
« Reply #3 on: October 09, 2014, 11:41:43 PM »
Pardon my obscure. I meant that a 1 followed by 5 zeroes is 100,000 rather than 1,000,000.

--best regards
music > microphones > a recorder of some sort

 

RSS | Mobile
Page created in 0.056 seconds with 32 queries.
© 2002-2024 Taperssection.com
Powered by SMF