Taperssection.com

Gear / Technical Help => Photo / Video Recording => Topic started by: batchain on August 17, 2010, 09:40:30 AM

Title: P&S Camera Lightstand Clamp
Post by: batchain on August 17, 2010, 09:40:30 AM

I have a Lumix ZX3 which I'd like to clamp to my lightstand I have my mics mounted to. Anyone have a recommendation for a small, light weight clamp that would attach to one of the lightstand risers. I'm wanting to clamp to the riser well below the mic t-bar.

Title: Re: P&S Camera Lightstand Clamp
Post by: rastasean on August 17, 2010, 10:32:48 AM

http://www.posthorn.com/Ats_1.html

I think that would probably work great for you. REI used to sell it but I can't find it online. The clamp is called the UltraClamp, as you see on the website.

One thing to note is that the pad that is attached to the screw seems to get stuck so you don't want to over tighten or else it is very difficult to take off whatever you're clamped to.

Title: Re: P&S Camera Lightstand Clamp
Post by: batchain on August 18, 2010, 11:48:29 AM

Quote from: rastasean on August 17, 2010, 10:32:48 AM

http://www.posthorn.com/Ats_1.html

I think that would probably work great for you. REI used to sell it but I can't find it online. The clamp is called the UltraClamp, as you see on the website.

One thing to note is that the pad that is attached to the screw seems to get stuck so you don't want to over tighten or else it is very difficult to take off whatever you're clamped to.

Thanks! That looks like just what I need.