Become a Site Supporter and Never see Ads again!

Author Topic: Taming the wild bass drum  (Read 5615 times)

0 Members and 1 Guest are viewing this topic.

Offline heathen

  • Trade Count: (23)
  • Needs to get out more...
  • *****
  • Posts: 3528
Taming the wild bass drum
« on: July 25, 2018, 06:57:57 PM »
I recorded a show last night at a small club/bar, and the bass drum was really heavy in the mix...to the point that it almost distracts from everything else.  One school of thought would be to just capture the show as it sounded and not mess with it.  Putting that aside for the sake of discussion, is there a way to de-emphasize that bass drum in post?  My first thought was trying to EQ it down, but that seems like it would "cannibalize" the bass guitar when it's in the same frequency range (and ironically, the bass guitar was relatively low in the mix so I don't think I can afford to take anything away from it).  So then I thought maybe compression could be used to bring the other sounds up closer to the level of the bass drum, somewhat offsetting how loud the bass drum is.  I have basically zero experience with compression, though, so I don't even know if that's feasible.

FWIW, this is just a two-channel recording (DPA 4061s).  Any ideas/thoughts appreciated.
Mics: AT4050ST | AT4031 | AT853 (C/SC) | Line Audio CM3 | Sennheiser e614 | Sennheiser MKE2 | DPA 4061 Pre: CA9200 Decks: Zoom F8 | Roland R-05

Offline Gordon

  • Trade Count: (22)
  • Needs to get out more...
  • *****
  • Posts: 11780
  • Gender: Male
    • my list
Re: Taming the wild bass drum
« Reply #1 on: July 25, 2018, 07:03:12 PM »
Does it sound like a "pop"? If so declick may help.  I've found this happening a lot on sbd recordings lately.
Microtech Gefell M20 or M21 > Nbob actives > Naiant PFA > Sound Devices MixPre-6 II @ 32/48

https://archive.org/details/fav-gordonlw

https://archive.org/details/teamdirtysouth

Offline rigpimp

  • Trade Count: (14)
  • Needs to get out more...
  • *****
  • Posts: 3177
  • Gender: Male
  • Jarts don't kill people!
Re: Taming the wild bass drum
« Reply #2 on: July 25, 2018, 07:11:37 PM »
I would EQ it. 

https://www.fabfilter.com/download/#download-pro-q-2-equalizer-plug-in

I would recommend to get the demo of Pro Q 2.  It is one of the most versatile EQ plugins around.

Remember that less is more.  Try a little bit and walk away before giving it a re-listen.

With Pro Q 2 you can roll off, notch it out, or anything in between.  Give it a try!
Mics: Schoeps MK 5 MP, Schoeps MK 8 MP, Schoeps MK 41 MP, KCY 250/5 > PFA
Pre/A>D/P48: Sonosax SX/M2, Sonosax SX/M2-LS, E.A.A. PSP-2, Baby Nbox, Neumann BS48i-2 (for sale)
Recorders: Sound Devices Mixpre-6ii, Sony PCM-A10
Playback: Jolida 1501 Hybrid > McIntosh MX 130 > Von Schweikert VR-4 JR, or Little Dot MK III > Sennheiser HD700
http://archive.org/bookmarks/kskreider
https://www.concertarchives.org/kskreider
https://archive.org/details/thespps

Offline heathen

  • Trade Count: (23)
  • Needs to get out more...
  • *****
  • Posts: 3528
Re: Taming the wild bass drum
« Reply #3 on: July 25, 2018, 07:38:10 PM »
Does it sound like a "pop"? If so declick may help.  I've found this happening a lot on sbd recordings lately.

Doesn't sound like a pop.  More like a typical bass drum "thud"...just really loud.
Mics: AT4050ST | AT4031 | AT853 (C/SC) | Line Audio CM3 | Sennheiser e614 | Sennheiser MKE2 | DPA 4061 Pre: CA9200 Decks: Zoom F8 | Roland R-05

Offline heathen

  • Trade Count: (23)
  • Needs to get out more...
  • *****
  • Posts: 3528
Re: Taming the wild bass drum
« Reply #4 on: July 25, 2018, 07:39:36 PM »
I would EQ it. 

https://www.fabfilter.com/download/#download-pro-q-2-equalizer-plug-in

I would recommend to get the demo of Pro Q 2.  It is one of the most versatile EQ plugins around.

Remember that less is more.  Try a little bit and walk away before giving it a re-listen.

With Pro Q 2 you can roll off, notch it out, or anything in between.  Give it a try!

I will give that a try.  Thanks man!
Mics: AT4050ST | AT4031 | AT853 (C/SC) | Line Audio CM3 | Sennheiser e614 | Sennheiser MKE2 | DPA 4061 Pre: CA9200 Decks: Zoom F8 | Roland R-05

Offline Gutbucket

  • record > listen > revise technique
  • Trade Count: (15)
  • Needs to get out more...
  • *****
  • Posts: 15698
  • Gender: Male
  • "Better to love music than respect it" ~Stravinsky
Re: Taming the wild bass drum
« Reply #5 on: July 26, 2018, 10:57:38 AM »
You might try a dynamic-EQ.

Which is basically a compressor/EQ hybrid, often with a graphic EQ interface. You approach it like an EQ, locating the extent of the overly wild bass drum thud frequency range and pulling that down to get things sounding reasonable when the drum is hitting.  Difference is the filter gain is modulated dynamically by program level within that frequency range, so the depth of cut you specify is actively dialed in only when levels exceed the threshold in that range.  When levels in that frequency range remain below the threshold, no gain reduction is made - so when the oppressive kick-drum is not hitting you won't reduce the lower-level bass guitar content which resides in the same frequency range.
musical volition > vibrations > voltages > numeric values > voltages > vibrations> virtual teleportation time-machine experience
Better recording made easy - >>Improved PAS table<< | Made excellent- >>click here to download the Oddball Microphone Technique illustrated PDF booklet<< (note: This is a 1st draft, now several years old and in need of revision!  Stay tuned)

Offline Gutbucket

  • record > listen > revise technique
  • Trade Count: (15)
  • Needs to get out more...
  • *****
  • Posts: 15698
  • Gender: Male
  • "Better to love music than respect it" ~Stravinsky
Re: Taming the wild bass drum
« Reply #6 on: July 26, 2018, 11:11:59 AM »
Conceptually, dynamic-EQ is similar to multiband compression.  Both provide control over dynamics by frequency-range.  Difference is that typically a dynamic-EQ can be more specifically targeted in a way similar to how an EQs are used, rather than splitting the frequency range into more generalized regions with cross-over points between them.
musical volition > vibrations > voltages > numeric values > voltages > vibrations> virtual teleportation time-machine experience
Better recording made easy - >>Improved PAS table<< | Made excellent- >>click here to download the Oddball Microphone Technique illustrated PDF booklet<< (note: This is a 1st draft, now several years old and in need of revision!  Stay tuned)

ilduclo

  • Guest
  • Trade Count: (0)
Re: Taming the wild bass drum
« Reply #7 on: July 26, 2018, 12:40:48 PM »
I'd try to listen to it using decent audio equipment, sometimes what sounds poor with headphones thru a computer sounds better thru an amp and good speakers.  If you have a graphic equalizer you can dynamically play with various settings while listening. 

Offline goodcooker

  • Trade Count: (43)
  • Needs to get out more...
  • *****
  • Posts: 4638
  • Gender: Male
  • goes to 11
Re: Taming the wild bass drum
« Reply #8 on: July 26, 2018, 12:53:35 PM »

The thump of the kick drum (the resonance of the shell) is mostly between 30 and 125hz depending on many factors.

Unfortunately for EQing the bass guitar is ~40hz on the low open E and ~100hz on the open G string. There is definitely some overlap.

The clapper sound (the mallet striking the head) is more like ~350hz. Sometimes you can make a low in the mix kick drum stand out by upping this frequency but it doesn't work in reverse.

Unfortunately if you reduce the bass drum you also reduce the bass guitar....
Line Audio CM3/OM1 || MBHO KA500 hyper>PFA|| ADK A51 type IV || AKG C522XY
Oade Warm Mod and Presence+ Mod UA5s || Aerco MP2(needs help) || Neve Portico 5012 || Apogee MMP
SD Mixpre6 || Oade Concert Mod DR100mkii

pocket sized - CA11 cards > SP SB10 > Sony PCM A10

http://www.archive.org/bookmarks/goodcooker

"Are you the Zman?" - fan at Panic 10-08-10 Kansas City
"I don't know who left this perfectly good inflatable wook doll here, but if I'm blowing her up, I'm keeping her." -  hoppedup

Offline heathen

  • Trade Count: (23)
  • Needs to get out more...
  • *****
  • Posts: 3528
Re: Taming the wild bass drum
« Reply #9 on: July 26, 2018, 12:58:28 PM »
Unfortunately if you reduce the bass drum you also reduce the bass guitar....
Experimenting with various EQ settings last night that's what I heard in this recording.

I haven't tried dynamic EQ yet, though, so I'll have to mess with that.
Mics: AT4050ST | AT4031 | AT853 (C/SC) | Line Audio CM3 | Sennheiser e614 | Sennheiser MKE2 | DPA 4061 Pre: CA9200 Decks: Zoom F8 | Roland R-05

Offline Gutbucket

  • record > listen > revise technique
  • Trade Count: (15)
  • Needs to get out more...
  • *****
  • Posts: 15698
  • Gender: Male
  • "Better to love music than respect it" ~Stravinsky
Re: Taming the wild bass drum
« Reply #10 on: July 26, 2018, 01:07:27 PM »
Not much you will be able do to bring up the level of the bass guitar when both it and the kick are hitting simultaneously. The dynamic EQ approach I mention is intended to leave the bass guitar at its current level in between dynamically reduced kick hits. 

In essence, it automatically moves the graphic EQ slider down as the kick hits and back up again between kick hits.
musical volition > vibrations > voltages > numeric values > voltages > vibrations> virtual teleportation time-machine experience
Better recording made easy - >>Improved PAS table<< | Made excellent- >>click here to download the Oddball Microphone Technique illustrated PDF booklet<< (note: This is a 1st draft, now several years old and in need of revision!  Stay tuned)

Offline nulldogmas

  • Trade Count: (6)
  • Taperssection All-Star
  • ****
  • Posts: 1626
    • How I Escaped My Uncertain Fate
Re: Taming the wild bass drum
« Reply #11 on: July 26, 2018, 01:12:58 PM »

In essence, it automatically moves the graphic EQ slider down as the kick hits and back up again between kick hits.

Now I want to record a too-loud kick drum just to try this out, because it sounds like magic. (And yeah, I get how it works, but magic is still magic when you understand the trick.)

Offline heathen

  • Trade Count: (23)
  • Needs to get out more...
  • *****
  • Posts: 3528
Re: Taming the wild bass drum
« Reply #12 on: July 26, 2018, 01:20:53 PM »

In essence, it automatically moves the graphic EQ slider down as the kick hits and back up again between kick hits.

Now I want to record a too-loud kick drum just to try this out, because it sounds like magic.

I can send you a sample of the recording I'm working with if you want.  PM me if so.
Mics: AT4050ST | AT4031 | AT853 (C/SC) | Line Audio CM3 | Sennheiser e614 | Sennheiser MKE2 | DPA 4061 Pre: CA9200 Decks: Zoom F8 | Roland R-05

Offline TheMetalist

  • Trade Count: (3)
  • Taperssection Member
  • ***
  • Posts: 356
  • Sverige/Sweden/Suède
Re: Taming the wild bass drum
« Reply #13 on: July 26, 2018, 02:48:59 PM »
I have used a hard limiter on recordings like this with a nice result.
"The music is your passport - Your magic key - To all the madness that awaits you." B.L. '86

Offline Gutbucket

  • record > listen > revise technique
  • Trade Count: (15)
  • Needs to get out more...
  • *****
  • Posts: 15698
  • Gender: Male
  • "Better to love music than respect it" ~Stravinsky
Re: Taming the wild bass drum
« Reply #14 on: July 26, 2018, 03:09:02 PM »
I've used dynamic-EQ's, but don't own a plugin and don't currently have a computer setup for editing.  I'll look into them again once I do to figure out which I'll end up using, as I've found them useful for this type of thing.

Here's an on-line piece on them and their use I just found via a quick web search- https://sonicscoop.com/2018/03/15/dynamic-eq-tips-from-the-pros-what-it-is-and-how-4-top-mixers-use-it/

A related tool I suspect may also work here, yet has a rather unusual interface and takes some figuring out, is the Voxengo Sonifier which I like and ended up purchasing.  It's sort of an extremely-multibanded compressor consisting of a seemingly ridiculously large number of individual bands.  Instead of adjusting sliders or knobs, you instead draw and modify the parameters via curves overlaying the full frequency spectrum, making it easy to vary parameters smoothly across a wide number of frequency bands.  Alternately you can draw in a something like a high-Q peaked curve to target a specific frequency region rather than a broad curve which changes parameters gradually with frequency.  It can pose a challenge to wrap your head around initially, but once you do its very powerful and musical.  For this application, ignore the additional panning and stereo width parameters it includes.

https://www.voxengo.com/product/soniformer/
musical volition > vibrations > voltages > numeric values > voltages > vibrations> virtual teleportation time-machine experience
Better recording made easy - >>Improved PAS table<< | Made excellent- >>click here to download the Oddball Microphone Technique illustrated PDF booklet<< (note: This is a 1st draft, now several years old and in need of revision!  Stay tuned)

Offline heathen

  • Trade Count: (23)
  • Needs to get out more...
  • *****
  • Posts: 3528
Re: Taming the wild bass drum
« Reply #15 on: July 26, 2018, 03:29:24 PM »
I have the TDR Nova plugin with the Audacity, and that can apparently do dynamic EQ.  I haven't figured out how to do it, though (unless of course I've been doing dynamic EQ by accident all along...I've done dumber things so I'm not ruling that out).

Edit: Just found this video, which actually demonstrates EQing a bass drum with TDR Nova (about 14 minutes in), including dynamic EQ: https://www.youtube.com/watch?v=v25I9fXcUwY (I definitely haven't been doing dynamic EQ, I now see)
« Last Edit: July 26, 2018, 03:36:07 PM by heathen »
Mics: AT4050ST | AT4031 | AT853 (C/SC) | Line Audio CM3 | Sennheiser e614 | Sennheiser MKE2 | DPA 4061 Pre: CA9200 Decks: Zoom F8 | Roland R-05

Offline heathen

  • Trade Count: (23)
  • Needs to get out more...
  • *****
  • Posts: 3528
Re: Taming the wild bass drum
« Reply #16 on: July 26, 2018, 11:26:08 PM »
I messed with dynamic EQ a bit and am really impressed with what it can do.  Having taken a first stab at it, I'd really appreciate if anyone could take a listen and give me some feedback ("I'd love it if you came and gave me notes").  Here's a link to download one song, both the raw version and the version with the dynamic EQ: https://we.tl/2mnUrHlJPO (the only change I made to the raw version was to amplify so both files sound roughly equivalent in terms of loudness).
Mics: AT4050ST | AT4031 | AT853 (C/SC) | Line Audio CM3 | Sennheiser e614 | Sennheiser MKE2 | DPA 4061 Pre: CA9200 Decks: Zoom F8 | Roland R-05

Offline Gutbucket

  • record > listen > revise technique
  • Trade Count: (15)
  • Needs to get out more...
  • *****
  • Posts: 15698
  • Gender: Male
  • "Better to love music than respect it" ~Stravinsky
Re: Taming the wild bass drum
« Reply #17 on: July 27, 2018, 11:43:28 AM »
Sounds to me like it's achieving what you are looking for.  The in ear 'phones I'm using are not in anyway reliable for judging low frequency content or balance, with weak bass response and limited extension, yet still allow for relative judgement between the two and the kick resonance sounds better controlled and more balanced with the other instrumentation in your dynamically EQ'd version.

In the section from ~5:15-5:45 where there is discernible bass line movement around the kick hits, I can now clearly identify the bass line in the EQ'd version, whereas in the raw file it is more buried by the kick and the two sort of mush together, making the bass line less easily identifiable.
musical volition > vibrations > voltages > numeric values > voltages > vibrations> virtual teleportation time-machine experience
Better recording made easy - >>Improved PAS table<< | Made excellent- >>click here to download the Oddball Microphone Technique illustrated PDF booklet<< (note: This is a 1st draft, now several years old and in need of revision!  Stay tuned)

Offline capnhook

  • All your llamas are belong to us....
  • Site Supporter
  • Trade Count: (20)
  • Needs to get out more...
  • *
  • Posts: 4843
  • All your llamas are belong to us....
Re: Taming the wild bass drum
« Reply #18 on: August 10, 2018, 08:10:45 PM »
Another happy TDR Nova user here, plugs into Audacity AOK
Proud member of the reality-based community

BSCS-L->JB-mod [NAK CM-300 (CP-3) and/or (CP-1)]->LSD2->CA CAFS-Omni->Sony ECM-907**Apogee MiniMe Rev. C->CA Ugly II->**Edirol OCM R-44->Tascam DR-22WL->Sony TCD-D8


"Don't ever take an all or nothing attitude when it comes to making a difference
and being beautiful and making the world a beautiful place through your actions.
Every little bit is registered.  Every little bit.  So be as beautiful as you can as often as you can"

"It'll never be over, 'till we learn."
 
"My dream is to get a bus and get the band and just go coast to coast. Just about everything else except music, is anti-musical.  That's it.  Music's the thing." - Jeb Puryear

Offline morst

  • I think I found an error on the internet; #UnionStrong
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 5950
Re: Taming the wild bass drum
« Reply #19 on: August 13, 2018, 12:30:02 AM »
  One school of thought would be to just capture the show as it sounded and not mess with it.  Putting that aside for the sake of discussion, is there a way to de-emphasize that bass drum in post?
Well, if you stop putting it aside, then I can jump in...


If you were mixing a band, and someone in the band was sucking, would it be your job to turn them down?


"Dance with the ones what brung ya."


I'd say clean it so that it can be listened to, warts-and-all, or don't bother messing with it. An audience recording is a record of what it sounded like at that place, at that time, to those mics. If your rig didn't distort on the bass, then you have a proper capture of the event. Make it sound as nice as you can, but in my opinion, don't sweat trying to change it too much. Sure, give a shot, but don't stress if you can't "make a silk purse of a sows ear!"  :hmmm:
https://toad.social/@morst spoutible.com/morst post.news/@acffhmorst

Offline wforwumbo

  • Trade Count: (11)
  • Taperssection Regular
  • **
  • Posts: 186
Re: Taming the wild bass drum
« Reply #20 on: August 15, 2018, 09:42:39 AM »
Send me a clip. A well-tuned bell filter should do the trick, my ears will cost you less money than Pro Q 2 (which is a phenom plug-in but not cheap - used to use it myself but my ears got to the point where isolating filters was more work than doing the critical listening with lower-latency/more efficient plugins).
North Jersey native, Upstate veteran, proud Texan

2x Schoeps mk2; 2x Schoeps mk21; 2x Schoeps mk4

4x Schoeps cmc5; 4x Schoeps KC5; Nbob KCY; Naiant PFA

EAA PSP-2

Sound Devices Mixpre-6

 

RSS | Mobile
Page created in 0.092 seconds with 46 queries.
© 2002-2024 Taperssection.com
Powered by SMF