Become a Site Supporter and Never see Ads again!

Author Topic: RX9  (Read 4278 times)

0 Members and 1 Guest are viewing this topic.

Offline old and in the way

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 194
RX9
« on: October 14, 2021, 06:52:58 PM »
    RX9 out . 149.00 upgrade from 8 ( Sweetwater) . i've got 8 Standard and love it , salvaged a few shows that had screamer and whistlers .

Offline flask

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 145
Re: RX9
« Reply #1 on: October 15, 2021, 04:01:27 PM »
Loyalty pricing is available directly from Izotope if you qualify. $49 for RX9 until the end of the month.
Mics: AKG C480B CK61/CK63 | AT943C/O
Pre/Pwr: UA-5 wmod | SPSB-1 | Baby nbox
Recorders: TCD-D7 | NJB3 | DR-680mkii | PCM-A10

Offline DavidPuddy

  • Trade Count: (15)
  • Taperssection All-Star
  • ****
  • Posts: 1533
Re: RX9
« Reply #2 on: October 25, 2021, 12:48:31 PM »
Loyalty pricing is available directly from Izotope if you qualify. $49 for RX9 until the end of the month.

Where did you get this pricing? I'm seeing $99 when I log in.

EDIT: Nevermind, I'm on RX7, hence the $99 upgrade. Upgrading from RX8 is $49.
« Last Edit: October 25, 2021, 02:48:14 PM by DavidPuddy »

Offline flask

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 145
Re: RX9
« Reply #3 on: October 26, 2021, 04:23:36 PM »
After logging into izotope.com, there is a My Loyalty Offers link on the left side. It was in there.
Mics: AKG C480B CK61/CK63 | AT943C/O
Pre/Pwr: UA-5 wmod | SPSB-1 | Baby nbox
Recorders: TCD-D7 | NJB3 | DR-680mkii | PCM-A10

Offline EmRR

  • Trade Count: (5)
  • Taperssection Member
  • ***
  • Posts: 727
    • ElectroMagnetic Radiation Recorders
Re: RX9
« Reply #4 on: October 26, 2021, 04:44:03 PM »
I can report that it runs fine under mac 10.13.6, though it's not officially supported. 
Mics: DPA 4060 w/MPS 6030 PSU/DAD6001/DAD4099, Neumann KM 131, Oktava MK 012, Sennheiser MKH 105, MKH 20, MKH 30, MKH 40, MKH 800 TWIN
Recorders: Zoom F8n, Sony MZ-R50

Offline flask

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 145
Re: RX9
« Reply #5 on: October 26, 2021, 05:07:29 PM »
I'm running it on macOS Monterey (12.0.1) Intel fwiw. No problems yet.

System Requirements
Operating Systems:
Mac: macOS Mojave (10.14.6) - macOS Big Sur (11.6)*
Windows: Windows 10
* Intel Macs or Apple Silicon Macs in Rosetta mode only.
Plugin Formats:
AU, AAX, VST2, VST3.

All plug-in formats are 64-bit only.

Supported Hosts:
Logic Pro, Pro Tools 2021, Live 11, Cubase 10.5-11, Nuendo 11, Studio One 5, Reaper 6, FL Studio 20, Audition CC, Premiere Pro CC.
« Last Edit: October 26, 2021, 05:11:56 PM by flask »
Mics: AKG C480B CK61/CK63 | AT943C/O
Pre/Pwr: UA-5 wmod | SPSB-1 | Baby nbox
Recorders: TCD-D7 | NJB3 | DR-680mkii | PCM-A10

Offline nulldogmas

  • Trade Count: (6)
  • Taperssection All-Star
  • ****
  • Posts: 1368
    • How I Escaped My Uncertain Fate
Re: RX9
« Reply #6 on: November 29, 2021, 11:57:23 AM »
Upgrade to RX9 from Elements is now $149, per the loyalty offers page.

Offline checht

  • Trade Count: (5)
  • Taperssection Member
  • ***
  • Posts: 566
  • Old and in the Way
Re: RX9
« Reply #7 on: January 04, 2022, 03:56:22 PM »
Audience chatter/yells removal idea: Rather than spectral repair, what about separating the vocal stem and then deleting sections where there's audience but no band vocal, and repairing places where they are coincident? Been playing around and seems pretty good. Seems easier and move complete removal to simply delete.

Anyone tried this method?

Thoughts?
Schoeps MK41s > nbob KCY >
Naiant PFA 60v > Sound Devices MP-6II -OR- Naiant IPA > Sony PCM-A10
Vanguard V1s matched pair
Niaint x8
Recordings at LMA

Offline checht

  • Trade Count: (5)
  • Taperssection Member
  • ***
  • Posts: 566
  • Old and in the Way
Re: RX9
« Reply #8 on: May 27, 2022, 07:30:03 PM »
Upgraded to 9 for $49 via loyalty page.

New dynamic mode in de-hum is genius, made huge improvement to recording of Stanley Clarke this week w PA issues.
Schoeps MK41s > nbob KCY >
Naiant PFA 60v > Sound Devices MP-6II -OR- Naiant IPA > Sony PCM-A10
Vanguard V1s matched pair
Niaint x8
Recordings at LMA

Offline rigpimp

  • Trade Count: (14)
  • Needs to get out more...
  • *****
  • Posts: 2834
  • Gender: Male
  • Jarts don't kill people!
Re: RX9
« Reply #9 on: May 27, 2022, 08:00:57 PM »
Upgraded to 9 for $49 via loyalty page.

New dynamic mode in de-hum is genius, made huge improvement to recording of Stanley Clarke this week w PA issues.

I have been using RX since version 1.2 and would like to buy and upgrade to rx9 advanced.  What is the best-suggested path without shelling out $500+?  I owe these folks some scratch but I am losing my job next month.
Mics: Schoeps MK5 G MP, Schoeps CCM 4 Lg MP, Schoeps MK8 MP, nBob cables > PFA, KCY 250/5 > PFA
Pre/A>D/P48: Sonosax SX/M2-LS, E.A.A. PSP-2, Naiant Tinybox, Neumann BS48i-2 (for sale)
Recorders: Sound Devices Mixpre-6, Sony PCM-M10, Sony PCM-A10
Playback: Jolida 1501 Hybrid > McIntosh MX 130 > Von Schweikert VR-4 JR, or Creek OBH-11 > Sennheiser HD800
http://archive.org/bookmarks/kskreider
https://archive.org/details/thespps

Offline checht

  • Trade Count: (5)
  • Taperssection Member
  • ***
  • Posts: 566
  • Old and in the Way
Re: RX9
« Reply #10 on: May 27, 2022, 08:09:23 PM »
I've found very best prices to be Sweetwater Black Friday. But that's not for a while.

Maybe go to 9 standard and wait for an offer?

What features in Adv are you looking for over std?
Schoeps MK41s > nbob KCY >
Naiant PFA 60v > Sound Devices MP-6II -OR- Naiant IPA > Sony PCM-A10
Vanguard V1s matched pair
Niaint x8
Recordings at LMA

Offline nassau73

  • Trade Count: (3)
  • Taperssection Regular
  • **
  • Posts: 126
Re: RX9
« Reply #11 on: May 28, 2022, 01:55:10 PM »
I agree that the Standard and wait for an upgrade offer is a good path.

Personally, for my more pedestrian usage, I find that Standard gives me the primary repair tools I need.

To complete any "sweetening", Ozone 9 Advanced has been very helpful.

Offline lmgbtapes

  • Trade Count: (3)
  • Taperssection Regular
  • **
  • Posts: 116
Re: RX9
« Reply #12 on: June 04, 2022, 02:50:56 PM »
I just broke into ozone for the first time. This thing is insane. Holds your hand like crazy.

Offline checht

  • Trade Count: (5)
  • Taperssection Member
  • ***
  • Posts: 566
  • Old and in the Way
Re: RX9
« Reply #13 on: June 04, 2022, 05:00:22 PM »
[snip]
To complete any "sweetening", Ozone 9 Advanced has been very helpful.
Curious about your sweetening workflow.

To improve distant vocals, I've been using music rebalance to grab the vocal stem and mixing it back in to the track, with great result.
Schoeps MK41s > nbob KCY >
Naiant PFA 60v > Sound Devices MP-6II -OR- Naiant IPA > Sony PCM-A10
Vanguard V1s matched pair
Niaint x8
Recordings at LMA

Offline nassau73

  • Trade Count: (3)
  • Taperssection Regular
  • **
  • Posts: 126
Re: RX9
« Reply #14 on: June 06, 2022, 12:11:34 PM »
Checht
Curious about your sweetening workflow.

To improve distant vocals, I've been using music rebalance to grab the vocal stem and mixing it back in to the track, with great result.
==========================================================================================

I don’t think that my workflow should be a model for anyone. I’m still learning a lot of this and am amazed at how recordings I have mastered in the past and thought that they were pretty good can now sound not exactly perfect. And as I try new procedures, that can change my approach going forward.

I’m glad grabbing the stem and adding it in is working for you. I haven’t done much with Music Rebalance because it seems my computer can’t handle the resource hit (the CPU fan persistently reminds me).

The recordings I work on are done with croakie mounted AT 933’s on my glasses. So even though I can usually record from a decent location, the raw recordings can usually use a little “help”.

After cleaning up the recording in RX, I’ll bring up Ozone as an RX plugin. Advanced has the Master Assist function which is what I start with. It gives a nice starting point for EQ settings and the like.

First I try to get the levels set to a point where I still have some flexibility to make any adjustments. The Gain Match feature is very helpful to be able to bypass Ozone and compare with the original recording at the same listening levels.

At this point it’s just time to fiddle with the various Ozone modules. Stacking the Master Assist suggestions in different orders or modifying the EQ curves is pretty much the same as what we’d do in RX except, for me, the Ozone modules are much nicer to work with. Each one has presets that give a chance to see what effects various changes can have. They can be modified, turned on and off or isolated.

So, for me, once I get the overall “feel” to be somewhat transparent, I’ll experiment with things like using Low End Focus, adding an extra EQ module or seeing if the Imager can enhance the sound.

Offline checht

  • Trade Count: (5)
  • Taperssection Member
  • ***
  • Posts: 566
  • Old and in the Way
Re: RX9
« Reply #15 on: June 06, 2022, 12:55:11 PM »
^ thanks for the info!
Schoeps MK41s > nbob KCY >
Naiant PFA 60v > Sound Devices MP-6II -OR- Naiant IPA > Sony PCM-A10
Vanguard V1s matched pair
Niaint x8
Recordings at LMA

Offline nassau73

  • Trade Count: (3)
  • Taperssection Regular
  • **
  • Posts: 126
Re: RX9
« Reply #16 on: June 06, 2022, 04:28:00 PM »
^ thanks for the info!

It's hard to visualize a workflow in Ozone just by a written description. A demo of some of the newer features in version 9 is available at the Izotope site. The exact URL is 3 lines long for a copy/paste. So google Ozone 9 Demo and visit the official site.

Ozone Advanced IS SPENDY, but as has been discussed earlier in this thread about upgrading RX, that's the route I followed here. Got the low end version and took advantage of the upgrade offers.

Offline rigpimp

  • Trade Count: (14)
  • Needs to get out more...
  • *****
  • Posts: 2834
  • Gender: Male
  • Jarts don't kill people!
Re: RX9
« Reply #17 on: June 06, 2022, 07:46:41 PM »
Yes, I know this is an RX9 thread but I am still over here upgrading/crossgrading iZotope products.

I discovered the iZotope portal today and added the serial number for my copy of Ozone Elements to it.  Sweetwater has a $199 Ozone Advanced 9 upgrade from Elements 7-9.  I am not sure why upgrades from Standard are $50 more but I'll take it.

https://www.sweetwater.com/store/detail/Ozone9AdUpEl--izotope-ozone-9-advanced-mastering-suite-upgrade-from-ozone-elements-7-9
Mics: Schoeps MK5 G MP, Schoeps CCM 4 Lg MP, Schoeps MK8 MP, nBob cables > PFA, KCY 250/5 > PFA
Pre/A>D/P48: Sonosax SX/M2-LS, E.A.A. PSP-2, Naiant Tinybox, Neumann BS48i-2 (for sale)
Recorders: Sound Devices Mixpre-6, Sony PCM-M10, Sony PCM-A10
Playback: Jolida 1501 Hybrid > McIntosh MX 130 > Von Schweikert VR-4 JR, or Creek OBH-11 > Sennheiser HD800
http://archive.org/bookmarks/kskreider
https://archive.org/details/thespps

Offline checht

  • Trade Count: (5)
  • Taperssection Member
  • ***
  • Posts: 566
  • Old and in the Way
Re: RX9
« Reply #18 on: June 06, 2022, 07:59:57 PM »
What's the value proposition for Ozone advanced? How has it been useful?
Schoeps MK41s > nbob KCY >
Naiant PFA 60v > Sound Devices MP-6II -OR- Naiant IPA > Sony PCM-A10
Vanguard V1s matched pair
Niaint x8
Recordings at LMA

Offline rigpimp

  • Trade Count: (14)
  • Needs to get out more...
  • *****
  • Posts: 2834
  • Gender: Male
  • Jarts don't kill people!
Re: RX9
« Reply #19 on: June 06, 2022, 08:09:50 PM »
What's the value proposition for Ozone advanced? How has it been useful?

Larger number of features and many more presets.  I like to start with Remove Mud preset for clearing up muddy/boomy rooms and tweak from there.  I'm not that hot at starting EQ from scratch and use presets as a bit of a crutch starting point.
Mics: Schoeps MK5 G MP, Schoeps CCM 4 Lg MP, Schoeps MK8 MP, nBob cables > PFA, KCY 250/5 > PFA
Pre/A>D/P48: Sonosax SX/M2-LS, E.A.A. PSP-2, Naiant Tinybox, Neumann BS48i-2 (for sale)
Recorders: Sound Devices Mixpre-6, Sony PCM-M10, Sony PCM-A10
Playback: Jolida 1501 Hybrid > McIntosh MX 130 > Von Schweikert VR-4 JR, or Creek OBH-11 > Sennheiser HD800
http://archive.org/bookmarks/kskreider
https://archive.org/details/thespps

Offline nassau73

  • Trade Count: (3)
  • Taperssection Regular
  • **
  • Posts: 126
Re: RX9
« Reply #20 on: June 07, 2022, 12:28:25 AM »
First - as rigpimp mentioned about discovering the Izotope portal...
If any RX or other Izotope users have not installed the portal - it's a good idea to do so and check every once in awhile. Program updates for the stuff you own will be installed and you'll be notified of other free plugins that may be available.

What's the value proposition for Ozone advanced? How has it been useful?

Larger number of features and many more presets.  I like to start with Remove Mud preset for clearing up muddy/boomy rooms and tweak from there.  I'm not that hot at starting EQ from scratch and use presets as a bit of a crutch starting point.

I have to add myself to the contingent of non-professional music mastering folks. The pre-sets are a helpful way to start a mastering session.

For users like checht, who are satisfied with RX for separating a vocal stem and reintroducing it to your current music file - the question would be - what do you feel you still need other than what you are getting from within your version of RX. If you're satisfied - you're good.

For me, starting off with the suggestions by using Master Assist, it's kinda like Adobe starting you off with your original file in the Master Rack module. Unlike Adobe Master Rack where you start from scratch with everything, Master Assist gives you a starting point. You can choose to use it or not since you are presented with a preview prior to accepting and using the suggestion as your starting point.

If you do accept the starting point in Ozone, you now are able to stack different modules as with Adobe Mastering Rack which I've not been able to do in RX.

One thing to also keep in mind is that if you're working with 24 bit files and want to use Traders Little Helper to create flac files, you can use RX to export the regions to files in 24 bit. At least the last version of Adobe that I had been using saves as 32 bit float which the version of TLH that I have does not handle.

The other thing I just learned recently in working with 24 bit files for uploads to Lossless Legs is that align on sector boundaries only pertains to files you're converting to 16/44.1 for CD burning. Since you can't burn 24/48 or higher for CD's, sector boundaries no longer come into consideration.


Offline rigpimp

  • Trade Count: (14)
  • Needs to get out more...
  • *****
  • Posts: 2834
  • Gender: Male
  • Jarts don't kill people!
Re: RX9
« Reply #21 on: June 14, 2022, 12:07:42 PM »
It is currently cheaper to buy Ozone 9 Advanced outright (199.00) than it is to portal upgrade it from Elements (370.00)  Go figure.   :shrug:  Even the academic pricing is higher (249.50)

Edit: Coupon code FRET10 gets you 10% off sitewide
« Last Edit: June 14, 2022, 12:10:47 PM by rigpimp »
Mics: Schoeps MK5 G MP, Schoeps CCM 4 Lg MP, Schoeps MK8 MP, nBob cables > PFA, KCY 250/5 > PFA
Pre/A>D/P48: Sonosax SX/M2-LS, E.A.A. PSP-2, Naiant Tinybox, Neumann BS48i-2 (for sale)
Recorders: Sound Devices Mixpre-6, Sony PCM-M10, Sony PCM-A10
Playback: Jolida 1501 Hybrid > McIntosh MX 130 > Von Schweikert VR-4 JR, or Creek OBH-11 > Sennheiser HD800
http://archive.org/bookmarks/kskreider
https://archive.org/details/thespps

Offline ballerusk

  • Trade Count: (3)
  • Taperssection Regular
  • **
  • Posts: 243
  • Soft spot for the sweet spot
Re: RX9
« Reply #22 on: June 18, 2022, 04:01:45 PM »
Maybe I should invest in this. My limited knowledge and skill in Audacity leaves my recordings with low volume after normalizing so maybe this is a bit more of a magic wand?
Schoeps MK41s > Schoeps CMRs > Naiant Tinybox > Sony PCM-M10

Offline nulldogmas

  • Trade Count: (6)
  • Taperssection All-Star
  • ****
  • Posts: 1368
    • How I Escaped My Uncertain Fate
Re: RX9
« Reply #23 on: June 18, 2022, 04:44:41 PM »
Maybe I should invest in this. My limited knowledge and skill in Audacity leaves my recordings with low volume after normalizing so maybe this is a bit more of a magic wand?

You mean even after normalizing? If normalizing is actually making the levels quieter, something is definitely going wrong.

In my experience, you don't need RX for things like levels, EQ, dynamic compression, etc., though it does all that nicely enough. It's next-level stuff like "bring up the vocals relative to the instruments" or "eliminate that one guy clapping out of rhythm during the music" that RX is really unbeatable at.

Offline ballerusk

  • Trade Count: (3)
  • Taperssection Regular
  • **
  • Posts: 243
  • Soft spot for the sweet spot
Re: RX9
« Reply #24 on: June 18, 2022, 04:59:09 PM »
Haha, yes, I mean even after normalizing. I need to turn up the volume double during playback compared to other songs. I guess I have to start learning (soft) compressing or something.
Schoeps MK41s > Schoeps CMRs > Naiant Tinybox > Sony PCM-M10

Offline rigpimp

  • Trade Count: (14)
  • Needs to get out more...
  • *****
  • Posts: 2834
  • Gender: Male
  • Jarts don't kill people!
Re: RX9
« Reply #25 on: June 18, 2022, 10:00:26 PM »
Does this $199 "Everything Bundle" work for anyone?

https://www.izotope.com/en/shop/paid-loyalty-deals-2.html
Mics: Schoeps MK5 G MP, Schoeps CCM 4 Lg MP, Schoeps MK8 MP, nBob cables > PFA, KCY 250/5 > PFA
Pre/A>D/P48: Sonosax SX/M2-LS, E.A.A. PSP-2, Naiant Tinybox, Neumann BS48i-2 (for sale)
Recorders: Sound Devices Mixpre-6, Sony PCM-M10, Sony PCM-A10
Playback: Jolida 1501 Hybrid > McIntosh MX 130 > Von Schweikert VR-4 JR, or Creek OBH-11 > Sennheiser HD800
http://archive.org/bookmarks/kskreider
https://archive.org/details/thespps

Offline checht

  • Trade Count: (5)
  • Taperssection Member
  • ***
  • Posts: 566
  • Old and in the Way
Re: RX9
« Reply #26 on: June 19, 2022, 12:56:37 AM »
When I log in, the price changes to $499.
Ozone 9 Adv upgrade down to $149 though...
Schoeps MK41s > nbob KCY >
Naiant PFA 60v > Sound Devices MP-6II -OR- Naiant IPA > Sony PCM-A10
Vanguard V1s matched pair
Niaint x8
Recordings at LMA

Offline nulldogmas

  • Trade Count: (6)
  • Taperssection All-Star
  • ****
  • Posts: 1368
    • How I Escaped My Uncertain Fate
Re: RX9
« Reply #27 on: June 19, 2022, 09:10:21 AM »
Haha, yes, I mean even after normalizing. I need to turn up the volume double during playback compared to other songs. I guess I have to start learning (soft) compressing or something.

It makes a huge difference. I usually just eyeball the dB level that 99% of the music falls under, then compress the hell (4:1) out of everything above that, which is usually all applause and stray drum hits. it's almost always impossible to hear any change from this, and it can create several dB of headroom for normalizing.

(Apologies for the topic drift.)

Offline rigpimp

  • Trade Count: (14)
  • Needs to get out more...
  • *****
  • Posts: 2834
  • Gender: Male
  • Jarts don't kill people!
Re: RX9
« Reply #28 on: June 19, 2022, 12:38:49 PM »
When I log in, the price changes to $499.
Ozone 9 Adv upgrade down to $149 though...

I guess it was a price mistake that only lasted for about 40 minutes according to the folks that were actually able to grab it.  Apparently, Izotope had fixed it by the time I posted it here.
Mics: Schoeps MK5 G MP, Schoeps CCM 4 Lg MP, Schoeps MK8 MP, nBob cables > PFA, KCY 250/5 > PFA
Pre/A>D/P48: Sonosax SX/M2-LS, E.A.A. PSP-2, Naiant Tinybox, Neumann BS48i-2 (for sale)
Recorders: Sound Devices Mixpre-6, Sony PCM-M10, Sony PCM-A10
Playback: Jolida 1501 Hybrid > McIntosh MX 130 > Von Schweikert VR-4 JR, or Creek OBH-11 > Sennheiser HD800
http://archive.org/bookmarks/kskreider
https://archive.org/details/thespps

Offline DavidPuddy

  • Trade Count: (15)
  • Taperssection All-Star
  • ****
  • Posts: 1533
Re: RX9
« Reply #29 on: June 19, 2022, 06:18:17 PM »
I had an upgrade offer to RX9 for $99. What a steal.

Offline rigpimp

  • Trade Count: (14)
  • Needs to get out more...
  • *****
  • Posts: 2834
  • Gender: Male
  • Jarts don't kill people!
Re: RX9
« Reply #30 on: July 12, 2022, 02:03:58 PM »
RX Elements to RX 9 Standard upgrade for $99:

https://www.pluginboutique.com/products/9121

For those who are unaware of this vendor: I bought RX Elements at plugin boutique on June 20th for 8.18 Euros and it was a simple and fast digital transaction just like you would see at Sweetwater.  The key was immediately recognized in the iZotope portal.  Reviews/comments of this vendor can be found over on Gearslutz, like here: https://gearspace.com/board/so-much-gear-so-little-time/971599-pluginboutique-com-reputable-dealer.html
Mics: Schoeps MK5 G MP, Schoeps CCM 4 Lg MP, Schoeps MK8 MP, nBob cables > PFA, KCY 250/5 > PFA
Pre/A>D/P48: Sonosax SX/M2-LS, E.A.A. PSP-2, Naiant Tinybox, Neumann BS48i-2 (for sale)
Recorders: Sound Devices Mixpre-6, Sony PCM-M10, Sony PCM-A10
Playback: Jolida 1501 Hybrid > McIntosh MX 130 > Von Schweikert VR-4 JR, or Creek OBH-11 > Sennheiser HD800
http://archive.org/bookmarks/kskreider
https://archive.org/details/thespps

Offline voltronic

  • Trade Count: (34)
  • Needs to get out more...
  • *****
  • Posts: 3587
Re: RX9
« Reply #31 on: July 12, 2022, 02:13:09 PM »
I posted about this on another thread, but I encourage anyone interested in RX to pay the extra money for the Standard version. The Spectral Denoise and Spectral Repair modules alone are worth it; they use some sort of dark magic to do what they do.
DPA 4061 ~ Line Audio CM3 ~ Naiant X-Q ~ AT 853  |  Naiant PFAs ~ Shure FP24  |  Zoom F6 ~ Sony PCM-M10
MOTU M2 ~ KRK Rokit RP5 ~ Sennheiser HD 650 ~ Etymotic ER4XR  |  iZotope RX ~ Reaper ~ foobar2000 (SoX linear)


Team Line Audio

Offline rigpimp

  • Trade Count: (14)
  • Needs to get out more...
  • *****
  • Posts: 2834
  • Gender: Male
  • Jarts don't kill people!
Re: RX9
« Reply #32 on: July 12, 2022, 02:42:42 PM »
I posted about this on another thread, but I encourage anyone interested in RX to pay the extra money for the Standard version. The Spectral Denoise and Spectral Repair modules alone are worth it; they use some sort of dark magic to do what they do.

I didn't see a post for the $99 RX upgrade or I would have just bought it.  Where is it posted?

Sweetwater called me this morning after my Ozone 9 Advanced upgrade purchase and I told Cam the same thing that I repeat often, "There is a special place in heaven for the engineers/developers of iZotope algorithms."
Mics: Schoeps MK5 G MP, Schoeps CCM 4 Lg MP, Schoeps MK8 MP, nBob cables > PFA, KCY 250/5 > PFA
Pre/A>D/P48: Sonosax SX/M2-LS, E.A.A. PSP-2, Naiant Tinybox, Neumann BS48i-2 (for sale)
Recorders: Sound Devices Mixpre-6, Sony PCM-M10, Sony PCM-A10
Playback: Jolida 1501 Hybrid > McIntosh MX 130 > Von Schweikert VR-4 JR, or Creek OBH-11 > Sennheiser HD800
http://archive.org/bookmarks/kskreider
https://archive.org/details/thespps

Offline DavidPuddy

  • Trade Count: (15)
  • Taperssection All-Star
  • ****
  • Posts: 1533
Re: RX9
« Reply #33 on: July 12, 2022, 02:54:43 PM »
I posted about this on another thread, but I encourage anyone interested in RX to pay the extra money for the Standard version. The Spectral Denoise and Spectral Repair modules alone are worth it; they use some sort of dark magic to do what they do.

You're correct, but it's usually much cheaper to buy Elements first then upgrade than it is to outright purchase Standard

Offline rigpimp

  • Trade Count: (14)
  • Needs to get out more...
  • *****
  • Posts: 2834
  • Gender: Male
  • Jarts don't kill people!
Re: RX9
« Reply #34 on: July 12, 2022, 04:05:05 PM »
I posted about this on another thread, but I encourage anyone interested in RX to pay the extra money for the Standard version. The Spectral Denoise and Spectral Repair modules alone are worth it; they use some sort of dark magic to do what they do.

You're correct, but it's usually much cheaper to buy Elements first then upgrade than it is to outright purchase Standard

No to mention that this just came in from iZotope.  Two free plugin's from the Alliance!


Thank you for purchasing during our buy one pick two sale! We know you’re excited to begin building your custom plug-in chain, so please follow these next instructions carefully to unlock your free products from Plugin Alliance.

Visit the Plugin Alliance page linked in the button below

Select any 2 of the curated plug-ins on the page and add them to your cart. Only this curated listing is eligible for your pick two.

Click CHECKOUT and apply your iZotope voucher code

Your price will switch to $0—enjoy your 2 FREE plugins!


https://www.plugin-alliance.com/en/products/izotope_pa_1_plus_2_bundle.html?&utm_source=ACS&utm_medium=Email&utm_campaign=2022.07July+Campaigns&utm_content=Purchasers&utm_term=Recurring+Fulfillment&deliveryName=DM108562
Mics: Schoeps MK5 G MP, Schoeps CCM 4 Lg MP, Schoeps MK8 MP, nBob cables > PFA, KCY 250/5 > PFA
Pre/A>D/P48: Sonosax SX/M2-LS, E.A.A. PSP-2, Naiant Tinybox, Neumann BS48i-2 (for sale)
Recorders: Sound Devices Mixpre-6, Sony PCM-M10, Sony PCM-A10
Playback: Jolida 1501 Hybrid > McIntosh MX 130 > Von Schweikert VR-4 JR, or Creek OBH-11 > Sennheiser HD800
http://archive.org/bookmarks/kskreider
https://archive.org/details/thespps

Offline voltronic

  • Trade Count: (34)
  • Needs to get out more...
  • *****
  • Posts: 3587
Re: RX9
« Reply #35 on: July 12, 2022, 10:05:59 PM »
I posted about this on another thread, but I encourage anyone interested in RX to pay the extra money for the Standard version. The Spectral Denoise and Spectral Repair modules alone are worth it; they use some sort of dark magic to do what they do.

I didn't see a post for the $99 RX upgrade or I would have just bought it.  Where is it posted?

Sweetwater called me this morning after my Ozone 9 Advanced upgrade purchase and I told Cam the same thing that I repeat often, "There is a special place in heaven for the engineers/developers of iZotope algorithms."

Sorry, I wasn't being clear. I didn't post about the upgrade offer in another thread; I found out about that here. What I posted elsewhere was just that I recommend just going for the Standard version as that includes some of the most special sauce available in RX, and I personally wouldn't want to get by without Spectral Denoise for what I do.
DPA 4061 ~ Line Audio CM3 ~ Naiant X-Q ~ AT 853  |  Naiant PFAs ~ Shure FP24  |  Zoom F6 ~ Sony PCM-M10
MOTU M2 ~ KRK Rokit RP5 ~ Sennheiser HD 650 ~ Etymotic ER4XR  |  iZotope RX ~ Reaper ~ foobar2000 (SoX linear)


Team Line Audio

Offline voltronic

  • Trade Count: (34)
  • Needs to get out more...
  • *****
  • Posts: 3587
Re: RX9
« Reply #36 on: July 12, 2022, 10:06:55 PM »
I posted about this on another thread, but I encourage anyone interested in RX to pay the extra money for the Standard version. The Spectral Denoise and Spectral Repair modules alone are worth it; they use some sort of dark magic to do what they do.

You're correct, but it's usually much cheaper to buy Elements first then upgrade than it is to outright purchase Standard

Oh is it really? That's great to know!
DPA 4061 ~ Line Audio CM3 ~ Naiant X-Q ~ AT 853  |  Naiant PFAs ~ Shure FP24  |  Zoom F6 ~ Sony PCM-M10
MOTU M2 ~ KRK Rokit RP5 ~ Sennheiser HD 650 ~ Etymotic ER4XR  |  iZotope RX ~ Reaper ~ foobar2000 (SoX linear)


Team Line Audio

Offline rigpimp

  • Trade Count: (14)
  • Needs to get out more...
  • *****
  • Posts: 2834
  • Gender: Male
  • Jarts don't kill people!
Re: RX9
« Reply #37 on: July 13, 2022, 12:16:35 PM »
I posted about this on another thread, but I encourage anyone interested in RX to pay the extra money for the Standard version. The Spectral Denoise and Spectral Repair modules alone are worth it; they use some sort of dark magic to do what they do.

You're correct, but it's usually much cheaper to buy Elements first then upgrade than it is to outright purchase Standard

Oh is it really? That's great to know!

I paid nothing for Ozone Elements (splice.com promo).  Yesterday I paid $99 for Ozone Advanced upgrade from Sweetwater.  $199 Standard Upgrade in my loyalty account.  (The Advanced loyalty offering is gone now that I have it.)

For RX Elements I paid 8.18 euros from Plugin Boutique and they have an upgrade to Standard for $269 but my loyalty account has Standard upgrade for $149 and Advanced upgrade for $499.  You kind of have to shop around.
Mics: Schoeps MK5 G MP, Schoeps CCM 4 Lg MP, Schoeps MK8 MP, nBob cables > PFA, KCY 250/5 > PFA
Pre/A>D/P48: Sonosax SX/M2-LS, E.A.A. PSP-2, Naiant Tinybox, Neumann BS48i-2 (for sale)
Recorders: Sound Devices Mixpre-6, Sony PCM-M10, Sony PCM-A10
Playback: Jolida 1501 Hybrid > McIntosh MX 130 > Von Schweikert VR-4 JR, or Creek OBH-11 > Sennheiser HD800
http://archive.org/bookmarks/kskreider
https://archive.org/details/thespps

Offline DavidPuddy

  • Trade Count: (15)
  • Taperssection All-Star
  • ****
  • Posts: 1533
Re: RX9
« Reply #38 on: September 27, 2022, 01:34:56 PM »
I'm working on a mic/sbd matrix and want to get rid of some crowd reactions, whistles, etc from the mic source. Would it be best to work on this before combining sources?

Offline checht

  • Trade Count: (5)
  • Taperssection Member
  • ***
  • Posts: 566
  • Old and in the Way
Re: RX9
« Reply #39 on: September 27, 2022, 01:57:05 PM »
That's my usual workflow.

I usually use spectral repair's replace function, as it seems less likely to create sonic artifacts compared to attenuate. But with either, sometimes I think I can hear more aggressive repair, almost like there's been a disturbance in the force  spectrum.

Mixing the sbd in post repair seems to smooth that out somewhat. Not certain, but I think I've heard benefit of ordering things that way.

Hope this helps...
Schoeps MK41s > nbob KCY >
Naiant PFA 60v > Sound Devices MP-6II -OR- Naiant IPA > Sony PCM-A10
Vanguard V1s matched pair
Niaint x8
Recordings at LMA

Offline voltronic

  • Trade Count: (34)
  • Needs to get out more...
  • *****
  • Posts: 3587
Re: RX9
« Reply #40 on: September 28, 2022, 06:00:05 AM »
That's my usual workflow.

I usually use spectral repair's replace function, as it seems less likely to create sonic artifacts compared to attenuate. But with either, sometimes I think I can hear more aggressive repair, almost like there's been a disturbance in the force  spectrum.

Mixing the sbd in post repair seems to smooth that out somewhat. Not certain, but I think I've heard benefit of ordering things that way.

Hope this helps...

This is solid advice. Spectral repair attenuate can easily turn into a place where you have put a black hole of nothingness into the place where the offending noise used to be, and that can draw attention to itself. Replace works extremely well if you good samples for it to pull from.

With all of these tools, you have to be careful not to let yourself be led by the visual changes to the spectrogram, but by your ears. Just because you can still see the remnants of a noise does not necessarily mean you need to go more aggressive to eradicate it.
DPA 4061 ~ Line Audio CM3 ~ Naiant X-Q ~ AT 853  |  Naiant PFAs ~ Shure FP24  |  Zoom F6 ~ Sony PCM-M10
MOTU M2 ~ KRK Rokit RP5 ~ Sennheiser HD 650 ~ Etymotic ER4XR  |  iZotope RX ~ Reaper ~ foobar2000 (SoX linear)


Team Line Audio

Offline DavidPuddy

  • Trade Count: (15)
  • Taperssection All-Star
  • ****
  • Posts: 1533
Re: RX9
« Reply #41 on: September 30, 2022, 07:15:25 AM »
Thanks all. It's a delicate balance and a little frustrating when attempting to eliminate a rowdy patron results in phase galore. Sometimes, less is truly more  :cheers:

 

RSS | Mobile
Page created in 0.128 seconds with 64 queries.
© 2002-2022 Taperssection.com
Powered by SMF