Become a Site Supporter and Never see Ads again!

Author Topic: Mic suggestion for DR-40x  (Read 1452 times)

0 Members and 1 Guest are viewing this topic.

Offline hedfro

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 12
Re: Mic suggestion for DR-40x
« Reply #15 on: March 23, 2022, 05:06:57 PM »
Appreciate the comments/replies.

1) Following up on the last comment/post : I understand I do not need a battery box as the DR-40X will feed phantom power to the mics (SP-CMC-4U-PHANTOM seems to be a good fit for my needs). However I read/interpreted the last post as the 4.7Khz mod is *ALSO* not needed when phantom power feeds these mics. Is that correct? I ask because the low-sensitivity option is not available for the SP-CMC-4U-PHANTOM

2) How do people clamp or position these mics when they are on a table or ledge in the venue? Are there certain gadgets/contraption people use? Anyway to point me in the right direction?

Again, thank you for the comments and the knowledge on this forum... it's been a rabbit hole but a fun one.

The xlr balanced version (Phantom) is the best option for high SPL. You don’t need the low sensitivity mod.
Tascam DR-40X, Tascam DR-2D, Roland R-07
CA-14 Cards (4.7), SP-CMC-4U-Phantom, SP-CMC-4U (AT 853 O, C)


RSS | Mobile
Page created in 9.999 seconds with 23 queries.
© 2002-2022
Powered by SMF