Become a Site Supporter and Never see Ads again!

Author Topic: Movo WST50 Ballistic Nylon Windscreens - back in stock!  (Read 2227 times)

0 Members and 1 Guest are viewing this topic.

Offline ol' dirty taper

  • Trade Count: (4)
  • Taperssection Member
  • ***
  • Posts: 396
  • Gender: Male
  • I've been riding with the ghost...
    • Ancient Earth
Re: Movo WST50 Ballistic Nylon Windscreens - back in stock!
« Reply #15 on: August 29, 2022, 12:53:11 PM »
I have the WS-G30 and the WS-50 and I have to say the WS-G30 kept more wind out of my recording recently than the white fur version WS-50. Thought I was safe using them on omnis in high wind and was wrong, are the ballistic WST80 the most wind resistant?
Mic : Schoeps MK21 | Beyer MC930 | Beyer CK930 | Beyer MC910 | Naiant X-X Omni | Beyer TG L34C | AT831s
Deck : SD MixPre 10T | SD MixPre 6 II | Sony PCM-A10 | Zoom F3
Pho/Vid : Sony a58 | Panasonic ZS100 | DJI Osmo Pocket
Play : Beyer DT990

Offline voltronic

  • Trade Count: (34)
  • Needs to get out more...
  • *****
  • Posts: 3587
Re: Movo WST50 Ballistic Nylon Windscreens - back in stock!
« Reply #16 on: August 29, 2022, 08:38:49 PM »
I can only speak to the WST (nylon cover; no fur) being very wind-resistant. The WS and WS-G each have a different type of fur over foam construction, and it's not clear from Movo's website which is supposed to be the best. The WS-G is much more expensive, for whatever reason.
DPA 4061 ~ Line Audio CM3 ~ Naiant X-Q ~ AT 853  |  Naiant PFAs ~ Shure FP24  |  Zoom F6 ~ Sony PCM-M10
MOTU M2 ~ KRK Rokit RP5 ~ Sennheiser HD 650 ~ Etymotic ER4XR  |  iZotope RX ~ Reaper ~ foobar2000 (SoX linear)


Team Line Audio

Offline ol' dirty taper

  • Trade Count: (4)
  • Taperssection Member
  • ***
  • Posts: 396
  • Gender: Male
  • I've been riding with the ghost...
    • Ancient Earth
Re: Movo WST50 Ballistic Nylon Windscreens - back in stock!
« Reply #17 on: August 29, 2022, 11:15:38 PM »
According to their website, the WS-G is marketed as having a "rigid" foam, while the WS in the description says it's an "acoustic foam technology" they've implored. Probably time I get a couple pairs of the WST screens.
Mic : Schoeps MK21 | Beyer MC930 | Beyer CK930 | Beyer MC910 | Naiant X-X Omni | Beyer TG L34C | AT831s
Deck : SD MixPre 10T | SD MixPre 6 II | Sony PCM-A10 | Zoom F3
Pho/Vid : Sony a58 | Panasonic ZS100 | DJI Osmo Pocket
Play : Beyer DT990

Offline ero3030

  • Trade Count: (59)
  • Taperssection All-Star
  • ****
  • Posts: 1610
  • Gender: Male
Re: Movo WST50 Ballistic Nylon Windscreens - back in stock!
« Reply #18 on: August 30, 2022, 07:33:38 AM »
According to their website, the WS-G is marketed as having a "rigid" foam, while the WS in the description says it's an "acoustic foam technology" they've implored. Probably time I get a couple pairs of the WST screens.
The foam on the inside is like a BRILLO pad!! Not on my caps.  15 bucks each, that's y.  Look great though
needin some fishhead music!

" known for f**king up a good weekend on a Thursday nite "

Offline BonoBeats

  • Trade Count: (3)
  • Taperssection Member
  • ***
  • Posts: 817
  • Gender: Male
    • My Band- Funk Pocket
Re: Movo WST50 Ballistic Nylon Windscreens - back in stock!
« Reply #19 on: August 30, 2022, 11:02:31 AM »
So it was reported here: https://taperssection.com/index.php?topic=200320.msg2381552#msg2381552

That these things pretty much suck. Anyone else have any experience in high winds? I hate carrying BAS to. I thought these were the perfect solution. Haven't had a chance to use mine yet. :shrug:

I use them reguarly at Red Rocks, Dick's etc. No issues at all.
Now You See Me Telefunken M60 Masters>MixPre6
Now You Don't    Naiant XX or MS-TFB-2-MKII>SP-SB10>Roland R05

Offline cd2go

  • Trade Count: (10)
  • Taperssection Member
  • ***
  • Posts: 521
  • Gender: Male
    • Strictly Slambovian
Re: Movo WST50 Ballistic Nylon Windscreens - back in stock!
« Reply #20 on: September 03, 2022, 12:11:15 AM »
Another very positive vote for the WST50 screens! I have the 3cm version and used them outside several occasions with Rode TF-5 and also my CCM4 and not an issue. Haven't measured the gap in front of the caps yet, but I insert them enough to just cover the rear vents. Certainly worth the purchase.

Offline phil_er_up

  • Trade Count: (9)
  • Taperssection All-Star
  • ****
  • Posts: 1210
Re: Movo WST50 Ballistic Nylon Windscreens - back in stock!
« Reply #21 on: September 03, 2022, 10:32:51 AM »
So it was reported here: https://taperssection.com/index.php?topic=200320.msg2381552#msg2381552

That these things pretty much suck. Anyone else have any experience in high winds? I hate carrying BAS to. I thought these were the perfect solution. Haven't had a chance to use mine yet. :shrug:

I use them reguarly at Red Rocks, Dick's etc. No issues at all.
Use these instead of the black DPA ones that come with the set and they are so much better. Taken up to 40MPH and no wind on mics...simply amazing! You need to make sure the inner side of the windscreen is pulled out toward the outside to make sure no wind gets through the area between mic and wind screen toughing each other.
Everyday is a gift. Enjoy each one!
Forward motion bring positive results.

Offline ts

  • Trade Count: (76)
  • Needs to get out more...
  • *****
  • Posts: 3515
  • Gender: Male
Re: Movo WST50 Ballistic Nylon Windscreens - back in stock!
« Reply #22 on: September 06, 2022, 04:04:56 PM »
Another very positive vote for the WST50 screens! I have the 3cm version and used them outside several occasions with Rode TF-5 and also my CCM4 and not an issue. Haven't measured the gap in front of the caps yet, but I insert them enough to just cover the rear vents. Certainly worth the purchase.

This is the way I understood the proper use of this screen, or any screen that has a rubber base to grip the cap or coupler or mic body. Make sure the sure all vents are covered and you have a tight seal around the bottom, meaning do not push the cap or coupler or whatever all the way in. That can allow airflow thru the bottom. Interesting point about the gap inside. I'm using mine with nBobs, naiants or LC3's and I know there is a small gap between the tip of the cap and the inside of the screen. Not as much of one with the Naiant couplers and AKG CK caps.

Offline Gutbucket

  • record > listen > revise technique
  • Trade Count: (15)
  • Needs to get out more...
  • *****
  • Posts: 14802
  • Gender: Male
  • "and the rowers keep on rowing!"
Re: Movo WST50 Ballistic Nylon Windscreens - back in stock!
« Reply #23 on: September 06, 2022, 05:17:00 PM »
Confirming what ts posted above, insert the microphone far enough that any vents are fully inside the windscreen and are neither sticking out the back making them partly exposed, nor blocked internally by the rubber cuff itself.  The cuff seal needs to be air-tight around the microphone in a position behind any vents.

At the front end of the windscreen, there should be some airspace left at the front end.  Wind protection will be reduced if the mic is shoved all the way in until it stops, leaving no internal air gap.  This needs to be done by feel.  With the big ass Shure you can only insert the mic so far, with the Movos you can over-insert too far.

Here is an example of internal depth on a couple larger Movos in comparison to BAS:

musical volition > vibrations > voltages > numeric values > voltages > vibrations> virtual teleportation time-machine experience
Better recording made easy - >>Improved PAS table<< | Made excellent- >>click here to download the Oddball Microphone Technique illustrated PDF booklet<< (note: This is a 1st draft, now several years old and in need of revision!  Stay tuned)

Offline Gutbucket

  • record > listen > revise technique
  • Trade Count: (15)
  • Needs to get out more...
  • *****
  • Posts: 14802
  • Gender: Male
  • "and the rowers keep on rowing!"
Re: Movo WST50 Ballistic Nylon Windscreens - back in stock!
« Reply #24 on: September 06, 2022, 05:25:21 PM »
The foam on the inside is like a BRILLO pad!! Not on my caps.  15 bucks each, that's y.  Look great though

It uses the same expanded large-pore flexible plastic foam inside as the Shure, and will not scratch the finish on the mics.  It's a material used for filters and is actually more like a sponge, with pores too large and open to retain water.  It only resembles a scouring pad due to the large pore size.

Although soft and compliant, the rubber cuff is more likely to cause a scratch due to it's grabbing tightly, but probably only if the surface is dirty or a bit of grit gets stuck in there.
musical volition > vibrations > voltages > numeric values > voltages > vibrations> virtual teleportation time-machine experience
Better recording made easy - >>Improved PAS table<< | Made excellent- >>click here to download the Oddball Microphone Technique illustrated PDF booklet<< (note: This is a 1st draft, now several years old and in need of revision!  Stay tuned)

Offline Gutbucket

  • record > listen > revise technique
  • Trade Count: (15)
  • Needs to get out more...
  • *****
  • Posts: 14802
  • Gender: Male
  • "and the rowers keep on rowing!"
Re: Movo WST50 Ballistic Nylon Windscreens - back in stock!
« Reply #25 on: September 06, 2022, 05:33:30 PM »
Movo sizing: The number after WST indicates the approximate internal depth in millimeters, but the mic should be inserted somewhat less far to provide some dead air space at the end.

If measuring actual internal depth, the size closest to the Shure A81WS (AKA big ass Shure) would be the WST60 or WST70.  But in regards to external dimension, and for most effective wind protection, the closest comparison would be WST80 as pictured above, with the mic inserted to same depth as if using the Shure.

[edited to correct, had it backwards on initial posting]
« Last Edit: September 06, 2022, 05:40:35 PM by Gutbucket »
musical volition > vibrations > voltages > numeric values > voltages > vibrations> virtual teleportation time-machine experience
Better recording made easy - >>Improved PAS table<< | Made excellent- >>click here to download the Oddball Microphone Technique illustrated PDF booklet<< (note: This is a 1st draft, now several years old and in need of revision!  Stay tuned)

Offline voltronic

  • Trade Count: (34)
  • Needs to get out more...
  • *****
  • Posts: 3587
Re: Movo WST50 Ballistic Nylon Windscreens - back in stock!
« Reply #26 on: September 06, 2022, 08:21:23 PM »
The foam on the inside is like a BRILLO pad!! Not on my caps.  15 bucks each, that's y.  Look great though

It uses the same expanded large-pore flexible plastic foam inside as the Shure, and will not scratch the finish on the mics.  It's a material used for filters and is actually more like a sponge, with pores too large and open to retain water.  It only resembles a scouring pad due to the large pore size.

Although soft and compliant, the rubber cuff is more likely to cause a scratch due to it's grabbing tightly, but probably only if the surface is dirty or a bit of grit gets stuck in there.

The other thing about that kind of plastic foam found inside the Movo's (and the BAS, apparently) is that it is far less likely to degrade over time, and have tiny crumbled pieces attach to your mic diaphragm. That is a real concern with the type of foam found in most windscreens (and what's on the outside of the BAS).
DPA 4061 ~ Line Audio CM3 ~ Naiant X-Q ~ AT 853  |  Naiant PFAs ~ Shure FP24  |  Zoom F6 ~ Sony PCM-M10
MOTU M2 ~ KRK Rokit RP5 ~ Sennheiser HD 650 ~ Etymotic ER4XR  |  iZotope RX ~ Reaper ~ foobar2000 (SoX linear)


Team Line Audio

Offline TSNéa

  • Trade Count: (6)
  • Taperssection Regular
  • **
  • Posts: 160
Re: Movo WST50 Ballistic Nylon Windscreens - back in stock!
« Reply #27 on: September 08, 2022, 10:55:00 AM »
The foam on the inside is like a BRILLO pad!! Not on my caps.  15 bucks each, that's y.  Look great though

It uses the same expanded large-pore flexible plastic foam inside as the Shure, and will not scratch the finish on the mics.  It's a material used for filters and is actually more like a sponge, with pores too large and open to retain water.  It only resembles a scouring pad due to the large pore size.

Although soft and compliant, the rubber cuff is more likely to cause a scratch due to it's grabbing tightly, but probably only if the surface is dirty or a bit of grit gets stuck in there.

The other thing about that kind of plastic foam found inside the Movo's (and the BAS, apparently) is that it is far less likely to degrade over time, and have tiny crumbled pieces attach to your mic diaphragm. That is a real concern with the type of foam found in most windscreens (and what's on the outside of the BAS).

I hope this is not too off topic.

I recently found, in a moving box forgotten far from home since the early 90's, three samples of "microphone" foam in two mic boxes... In one box was an AKG D12 on top of a grey foam pad that appeared to be intact, in the other was a Beyerdynamic M201 N in a pile of disintegrated black foam, with a black foam windscreen, in apparent good condition.

The protective foam of the M201 was of course unusable, sticky, in fine particles adhering everywhere including on the body of the microphone. But, for the M201's windscreen and the D12's protective foam, after a passage in soapy water, a rinse and a drying outside, in the shade, they were in perfect condition, some thirty years later...
All foams are not born equal!
I can't formally identify the foam windscreen of the M201. It is not the specific Beyerdynamic model, the WS101, longer, to cover the vents on the body of the mic (it is a hypercardioid). Maybe a Schoeps (or a DPA?) but the back of this windscreen is cut at right angles and not "rounded".

Both microphones work well.

N.B.: The M201 still had its individual frequency response curve in the box, i.e. the paper strip directly from the B&K meter, as was the custom at the time... Matching number, of course!  ;)

Translated with www.DeepL.com/Translator (free version)

 

RSS | Mobile
Page created in 0.087 seconds with 35 queries.
© 2002-2022 Taperssection.com
Powered by SMF