Im trying to setup my 2496 card with the ASIO drivers. Any help?
Whats weird is my 2496 plays at 24/48n flawlessly, but not at 24/96
just a thought. what are you using as playback form the 24/96? a receiver? monitor speakers etc?
had the audiophile 24/96 for years. anyway....
until I went 24/96 I had coax out into a old kenwood receiver. would play 24/48 just fine but not 24/96. turns out the receiver couldn't handle 96k. Nick turned me onto the Edirol MA-15D's and they are fucking great! for less than $200 no new receiver and some damn nice monitor speakers that handle 24/96. and I'm told they have the same guts as the ua5 for a/d etc.
as for asio w/ the ap24/96 the only place in the control panel I see anything about asio is under hardware settings. there is one little box that says "asio options" under that it says "disable audio app use of monitor mix and patchbay/router"
nothing under playback etc.
+T Gordon. Thank you VERY MUCH for that info. Now that you mention it, I bet its my receiver. Because 24/48 works FINE and 24/96 plays back real low in volume and almost muted and a real weird background noise. The noise sounds like a muffled or scattered signal if that makes sense. Was that the symptoms of your old receiver not being able to handle 24/96
FWIW, I am using a JVC RX 6000V Receiver. Id say shes pretty old. I think I got it for XMAS back in 1999 or 2000 I believe, so I bet thats the culprit. i wanted to spend my tax return money on an Aerco MP-2, but it may have to go towards some VR 2's and a sweet integrated instead
Now IO can start recording in 24/96 at least again
24/48 is FINE for what I record(Loud Jambands with LOUD PA systems) and I doubt that 24/96 could benefit from those circumstances, but at least i know its prolly not my soundcard but rather my receiver. Thanks Gordon!
Actualy, since I quit partying and have been clean as a whistle, I could prolly afford both