Become a Site Supporter and Never see Ads again!

Author Topic: Sonosax SX-M2D2 Coming...  (Read 108117 times)

0 Members and 1 Guest are viewing this topic.

Online Gutbucket

  • record > listen > revise technique
  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 15772
  • Gender: Male
  • "Better to love music than respect it" ~Stravinsky
Re: Sonosax SX-M2D2 Coming...
« Reply #180 on: June 27, 2022, 02:23:06 PM »
^ SDPIF is always digital. 

OT, but FYI the coax dig-in on the 680 can be used for two purposes:
1) recording a 1 or 2 channel SPDIF (coax/electrical) or AES/EBU format digital source.
2) sinc'ing clock of the 680 to another clock source without actually recording the signal.

1 also does 2. 
2 does not require 1.

Most tapers will be familiar with 1 from using external preamps that have a digital output.  I used to do the second when running both DR-680 and R-44 simultaneously so both machines would share the same clock (that of the R-44) and thus eliminate drift, even though the two recorders shared no recorded tracks in common.  That way, using tracks from both machines in the same mix afterwards only required initial time-alignment between those made on one recorder verses the other, without any subsequent drift over a long recording that would ordinarily require time-stretching to correct.
musical volition > vibrations > voltages > numeric values > voltages > vibrations> virtual teleportation time-machine experience
Better recording made easy - >>Improved PAS table<< | Made excellent- >>click here to download the Oddball Microphone Technique illustrated PDF booklet<< (note: This is a 1st draft, now several years old and in need of revision!  Stay tuned)


RSS | Mobile
Page created in 0.028 seconds with 26 queries.
© 2002-2024
Powered by SMF