Become a Site Supporter and Never see Ads again!

Author Topic: Glitches in soundboard feed, any chance for recovery?  (Read 190 times)

0 Members and 1 Guest are viewing this topic.

Offline Dan33185

  • Trade Count: (2)
  • Taperssection Member
  • ***
  • Posts: 448
  • Gender: Male
    • http://www.midwestsoundsrecordings.com/
Glitches in soundboard feed, any chance for recovery?
« on: March 21, 2024, 11:22:10 AM »
I recently recorded Wayne Hancock and was able to get a feed off the soundboard. I used 1/4" > Tascam DR-60D, and I noticed in post there were a lot of little glitches throughout the recording. I use the "click/pop eliminator" in Audition, but that doesn't seem to have helped it much. I'm guessing the recording is a lost cause, but I figured I'd ask here to see if anyone had any ideas. Sample below:

https://drive.google.com/file/d/1rliQaHDekQwByq3oscd-CUuMn-c6pQjD/view?usp=sharing
AUD: Zoom H2
SBD: Tascam DR-60D


Make the best out of the equipment you have, something is better than nothing!

Midwest Sounds Recordings
North Country Sounds

Offline grawk

  • Trade Count: (6)
  • Taperssection Member
  • ***
  • Posts: 346
  • Gender: Male
Re: Glitches in soundboard feed, any chance for recovery?
« Reply #1 on: March 21, 2024, 11:34:21 AM »
4015gs/4018vlgs/kk14->mma:a d-vice/sonosax minir82/sonosax sx-m2d2/nagra vi/lectrosonics spdr

Offline Dan33185

  • Trade Count: (2)
  • Taperssection Member
  • ***
  • Posts: 448
  • Gender: Male
    • http://www.midwestsoundsrecordings.com/
Re: Glitches in soundboard feed, any chance for recovery?
« Reply #2 on: March 21, 2024, 11:38:38 AM »
https://drive.google.com/file/d/1nSTVHxsz3xHDYhtCbCb6aQIF2cYky3JV/view?usp=drive_link

that was a quick hit with spectral repair in rx 10

Didn't even think of using that  :banging head: Thanks for doing that, definitely gives me hope I can salvage it.
AUD: Zoom H2
SBD: Tascam DR-60D


Make the best out of the equipment you have, something is better than nothing!

Midwest Sounds Recordings
North Country Sounds

Offline grawk

  • Trade Count: (6)
  • Taperssection Member
  • ***
  • Posts: 346
  • Gender: Male
Re: Glitches in soundboard feed, any chance for recovery?
« Reply #3 on: March 21, 2024, 11:42:55 AM »
just select as close to the noise as you can
4015gs/4018vlgs/kk14->mma:a d-vice/sonosax minir82/sonosax sx-m2d2/nagra vi/lectrosonics spdr

Offline adrianf74

  • Trade Count: (14)
  • Taperssection Member
  • ***
  • Posts: 685
  • Gender: Male
Re: Glitches in soundboard feed, any chance for recovery?
« Reply #4 on: March 21, 2024, 11:55:41 AM »
just select as close to the noise as you can
Exactly this.  RX does a great job in fixing a lot of lost cause recordings.
Decks: Zoom F6, Zoom F3 w/ BTA-1 | Power: Neewer NP-F970 7800mAh | Mics: (under construction) Line Audio CM3 | Camera: DJI Osmo Action 4

Offline Dan33185

  • Trade Count: (2)
  • Taperssection Member
  • ***
  • Posts: 448
  • Gender: Male
    • http://www.midwestsoundsrecordings.com/
Re: Glitches in soundboard feed, any chance for recovery?
« Reply #5 on: March 21, 2024, 12:09:51 PM »
just select as close to the noise as you can

Definitely...makes for tedious work but worth it in the end, it's already sounding much better. A few spots where there will be some weird distortion, but much better than the jarring sounds it was making before.
AUD: Zoom H2
SBD: Tascam DR-60D


Make the best out of the equipment you have, something is better than nothing!

Midwest Sounds Recordings
North Country Sounds

 

RSS | Mobile
Page created in 0.037 seconds with 29 queries.
© 2002-2024 Taperssection.com
Powered by SMF