Taperssection.com
Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: nedstruzz on July 07, 2005, 07:58:07 PM
-
?
-
It was made by Oade and is no longer available. If you do an advanced search for 148 under rig pictures you'll find plenty.
Here's a thread with some
http://taperssection.com/index.php?topic=41568.0
And another:
http://taperssection.com/index.php?topic=29375.0
And another:
http://taperssection.com/index.php?topic=11892.0
-
Great thank you!!!
How does it stack up next to a V2/V3?
-
well, thye m148 is transformer based, so its gonna be a touch 'warmer' and 'punchier' than the v2/3
the 148 has nice punch/warmth, and the v2/3 and more clean and detailed
the 148>v3 is where its at tho! 8)
-
well, thye m148 is transformer based, so its gonna be a touch 'warmer' and 'punchier' than the v2/3
the 148 has nice punch/warmth, and the v2/3 and more clean and detailed
the 148>v3 is where its at tho! 8)
no doubt, what you absolutely want to do is to run two preamps back to back, into a shaky a/d. And in particular, you want to be sure to run the m148 into a preamp that's gonna whack it's nuts right off...the v3 fits that bill for sure. ::) ;)
-
i would run the mytek ad after the m148
-
i would run the mytek ad after the m148
hell yeah that thing sounds great. ;D
-
i would run the mytek ad after the m148
hell yeah that thing sounds great. ;D
I think the 722 a/d will be adequate, no?
Marc, when you joinin the team?
Ray
-
shaky a/d.
huh? Shaky? Close to 50 shows taped in this camp, and not a single problem. Whatchutalkin bout, Maker's?
-
huh? Shaky? Close to 50 shows taped in this camp, and not a single problem. Whatchutalkin bout, Maker's?
Not shaky as in unreliable, shaky as in Marc doesn't care for it. Marc has a loooooong history of bashing the V3.
-
huh? Shaky? Close to 50 shows taped in this camp, and not a single problem. Whatchutalkin bout, Maker's?
Not shaky as in unreliable, shaky as in Marc doesn't care for it. Marc has a loooooong history of bashing the V3.
Fair enough. It's all just semantics an d blinking lights to most people anyway.
-
i would run the mytek ad after the m148
hell yeah that thing sounds great. ;D
I think the 722 a/d will be adequate, no?
Marc, when you joinin the team?
Ray
because of the gain controls on the 148/722, i have heard that it is not the most user-friendly setup
-
I see.
I was specifically asking about the sound quality, the other stuff can work itself out.
I dont ever stealth, nor have plans to, so i should have as much time and space as i need to fiddle with stuff, generally speaking.
thanks for the heads up though bean!
+T ray
-
i would run the mytek ad after the m148
muj,
scott brown,...
mytek heads,....
Which model is the portable?
http://www.mytekdigital.com/stereo192.htm
This one aint it?
Ray
-
I see.
I was specifically asking about the sound quality, the other stuff can work itself out.
I dont ever stealth, nor have plans to, so i should have as much time and space as i need to fiddle with stuff, generally speaking.
thanks for the heads up though bean!
+T ray
no problem, itsa something weird about the setup, might be muddy anyway ;D
the 148 is a fixed gain 20db,m if it were a variable gain pre, there would be no gain prooblem
-
no problem Mike.
+T backatcha
Ray
-
I see.
I was specifically asking about the sound quality, the other stuff can work itself out.
I dont ever stealth, nor have plans to, so i should have as much time and space as i need to fiddle with stuff, generally speaking.
thanks for the heads up though bean!
+T ray
no problem, itsa something weird about the setup, might be muddy anyway ;D
the 148 is a fixed gain 20db,m if it were a variable gain pre, there would be no gain prooblem
cool man, time will tell.
Im just glad I got my hands on all the stuff i wanted.
+T in 12
Ray
-
huh? Shaky? Close to 50 shows taped in this camp, and not a single problem. Whatchutalkin bout, Maker's?
Not shaky as in unreliable, shaky as in Marc doesn't care for it. Marc has a loooooong history of bashing the V3.
yup,marc is banned from the grace design website
:o ;D
-
huh? Shaky? Close to 50 shows taped in this camp, and not a single problem. Whatchutalkin bout, Maker's?
Not shaky as in unreliable, shaky as in Marc doesn't care for it. Marc has a loooooong history of bashing the V3.
yes, very reliable. like a fat homely g/f. She'll do the job, but could be done better. ;)
-
i would run the mytek ad after the m148
hell yeah that thing sounds great. ;D
I think the 722 a/d will be adequate, no?
Marc, when you joinin the team?
Ray
because of the gain controls on the 148/722, i have heard that it is not the most user-friendly setup
I've run 148>722 on several occasions and it couldn't be easier. no gain problems at all and they compliment each other very well. very nice with the mk41's, IMO
-
i would run the mytek ad after the m148
hell yeah that thing sounds great. ;D
I think the 722 a/d will be adequate, no?
Marc, when you joinin the team?
Ray
because of the gain controls on the 148/722, i have heard that it is not the most user-friendly setup
I've run 148>722 on several occasions and it couldn't be easier. no gain problems at all and they compliment each other very well. very nice with the mk41's, IMO
thanks for that Joe.
I was wanderin how itd work out.
+t
ray
-
I've run 148>722 on several occasions and it couldn't be easier. no gain problems at all and they compliment each other very well. very nice with the mk41's, IMO
i bet that kicks ass.
-
good to hear the steped gain worries turned out to not be a big deal
-
good to hear the steped gain worries turned out to not be a big deal
I"ll find out more when it gets here. :) Scheduled for tuesday.
-
good to hear the steped gain worries turned out to not be a big deal
I"ll find out more when it gets here. :) Scheduled for tuesday.
Boswell said no problems with audible artifacts running m148>722, I've heard the results firsthand, no noticeable steps.
-
good to hear the steped gain worries turned out to not be a big deal
I"ll find out more when it gets here. :) Scheduled for tuesday.
keep the 148 man!
ray
-
I like the M148>V3 with either Schoeps or the MGs! To each their own I guess... :)
-
good to hear the steped gain worries turned out to not be a big deal
I"ll find out more when it gets here. :) Scheduled for tuesday.
keep the 148 man!
ray
yeah the more i think about it, the less i want to get rid of it. oh to carry 1 box though. the modsbm will likely be on the chopping block soon :)
-
good to hear the steped gain worries turned out to not be a big deal
I"ll find out more when it gets here. :) Scheduled for tuesday.
keep the 148 man!
ray
yeah the more i think about it, the less i want to get rid of it. oh to carry 1 box though. the modsbm will likely be on the chopping block soon :)
i just bought one of them too.
:D figger ill use it for somethin.
-
good pickup ray, I'll throw the leegeddy mini to rca cable he made specifically to run from the mma6000 to a modsbm-1 for me... I haven't even used it yet
-
good pickup ray, I'll throw the leegeddy mini to rca cable he made specifically to run from the mma6000 to a modsbm-1 for me... I haven't even used it yet
awesome tim, thanks so much brother.
+T
ray
-
best brick around ;) (http://img.photobucket.com/albums/v16/kindguy/Im001346.jpg)
-
:D +T
what bag do you use??
Ray
-
The large targus backpack. The AD500 is in the back part.
-
The large targus backpack. The AD500 is in the back part.
im tryin to figger out which one to get so that I can fit the 722/brick/mgs in
as well as another jb3 for patching(so i can do a post matrix)
-
My bag is way to big, but it's the only option running the 500e.
Heres a few more pics.
(http://img.photobucket.com/albums/v16/kindguy/Im001347.jpg)
All the cables running through & don't forget rerun
(http://img.photobucket.com/albums/v16/kindguy/Im001348.jpg)
-
we need another run of those Re-Run stickers.... we could put his dob and dod on it
-
we need another run of those Re-Run stickers.... we could put his dob and dod on it
I have one of those too, those are old-skool now :P :)