Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1]   Go Down

Author Topic: Size comparison: SP-CMC-4U/DPA 4061  (Read 2284 times)

0 Members and 1 Guest are viewing this topic.

Offline Arni99

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 770
  • Gender: Male
Size comparison: SP-CMC-4U/DPA 4061
« on: July 14, 2007, 12:34:16 PM »
Logged
1st: SONY PCM-M10 + DPA 4060's + DPA MPS 6030 power supply (microdot)
2nd: iPhone 5 + "Rode iXY" microphone/"Zoom IQ5" microphone

nameloc01

  • Guest
  • Trade Count: (0)
Re: Size comparison: SP-CMC-4U/DPA 4061
« Reply #1 on: July 14, 2007, 01:49:02 PM »
there is no comparison..size wise.  the DPAs are about as small as you can get.the 4us are MUCH larger and heavier,but.. they are still quite stealthable and comparable sound wise if powered and used correctly.
Logged

Offline Arni99

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 770
  • Gender: Male
Re: Size comparison: SP-CMC-4U/DPA 4061
« Reply #2 on: July 14, 2007, 01:56:48 PM »
Quote from: nameloc01 on July 14, 2007, 01:49:02 PM
there is no comparison..size wise.  the DPAs are about as small as you can get.the 4us are MUCH larger and heavier,but.. they are still quite stealthable and comparable sound wise if powered and used correctly.
yeah, both are great mics ;).
just wanted to show them side by side. ;)
Logged
1st: SONY PCM-M10 + DPA 4060's + DPA MPS 6030 power supply (microdot)
2nd: iPhone 5 + "Rode iXY" microphone/"Zoom IQ5" microphone

Offline boojum

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3629
  • Gender: Male
Re: Size comparison: SP-CMC-4U/DPA 4061
« Reply #3 on: July 14, 2007, 03:17:10 PM »
Arni -  Those DPA's look like something stuck in your eye: they are so tiny!  I know you will have no trouble with them being detected if you do not want them to be.  And, they sound great. 

Cheers
Logged
Nov schmoz kapop.
Pages: [1]   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.035 seconds with 28 queries.
© 2002-2024 Taperssection.com
Powered by SMF