Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1] 2  All   Go Down

Author Topic: Herbie's Halo Tube Dampeners  (Read 5374 times)

0 Members and 1 Guest are viewing this topic.

Offline Nick Culbreth

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3084
  • Gender: Male
Herbie's Halo Tube Dampeners
« on: March 10, 2005, 06:36:11 PM »
I recently purchased a couple of these for the signal tubes for my amplifier and I thought I'd share my experiences for those of you that might be interested.  To put it simply these dampeners made a pretty substantial difference in my system, the imaging seemed to tighten up and the sound became a cleaner and sounded more natural.  Of all of my minor tweaks and upgrades these have probably made the second biggest impact behind only upgrading my speaker cables, in my experience they made a much bigger improvement over replacing my power cords at a fraction of the price.  To all those with tubes I'd highly recommend trying them out, if they don't work out for you you can send them back within 90 days for a full refund.

http://herbiesaudiolab.home.att.net

« Last Edit: March 10, 2005, 09:16:19 PM by nmculbreth »
Logged

Offline Tim

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 32913
  • Gender: Male
Re: Herbie's Halo Tube Dampeners
« Reply #1 on: March 10, 2005, 06:40:32 PM »
I was just going to ask about these... :P

+T Nick...
Logged
I’ve had a few weird experiences and a few close brushes with total weirdness of one sort or another, but nothing that’s really freaked me out or made me feel too awful about it. - Jerry Garcia

Offline Nick Culbreth

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3084
  • Gender: Male
Re: Herbie's Halo Tube Dampeners
« Reply #2 on: March 10, 2005, 06:45:03 PM »
Quote from: Tim on March 10, 2005, 06:40:32 PM
I was just going to ask about these... :P

+T Nick...

You're welcome Tim.  I've had these for awhile now, I just wanted to wait until I became more acquainted with my amp for a review.  I think my next step will be picking up a set for my power tubes and some isolation feet for my amp and source.  If they're anywhere near as good as the signal tube dampeners it will be money well spent.
Logged

Offline Lil Kim Jong-Il

  • Trade Count: (6)
  • Needs to get out more...
  • *****
  • Posts: 6498
  • large Marge sent me
Re: Herbie's Halo Tube Dampeners
« Reply #3 on: March 10, 2005, 07:26:09 PM »
Are you using them on all the tubes?

I have them on my amp's small tubes but have not bought ones for the power tubes yet.
Logged
The first rule of amateur neurosurgery club is .... I forget.

Offline Nick Culbreth

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3084
  • Gender: Male
Re: Herbie's Halo Tube Dampeners
« Reply #4 on: March 10, 2005, 07:59:28 PM »
Quote from: El Barto on March 10, 2005, 07:26:09 PM
Are you using them on all the tubes?

I have them on my amp's small tubes but have not bought ones for the power tubes yet.

Right now I only have them on my 12AX7 and 12AU7 tubes, I'll be ordering a pair for the power tubes shortly.
Logged

Offline ducati

  • Trade Count: (3)
  • Taperssection Member
  • ***
  • Posts: 572
  • I'm a llama!
Re: Herbie's Halo Tube Dampeners
« Reply #5 on: March 10, 2005, 08:54:19 PM »
Drat, and I just went and bought a full set of new ARC tube dampers... 
Logged

Offline Lil Kim Jong-Il

  • Trade Count: (6)
  • Needs to get out more...
  • *****
  • Posts: 6498
  • large Marge sent me
Re: Herbie's Halo Tube Dampeners
« Reply #6 on: March 10, 2005, 09:25:33 PM »
Wasn't someone going to review the grungebuster mat? 

Logged
The first rule of amateur neurosurgery club is .... I forget.

Offline Nick Culbreth

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3084
  • Gender: Male
Re: Herbie's Halo Tube Dampeners
« Reply #7 on: March 10, 2005, 10:26:13 PM »
Quote from: El Barto on March 10, 2005, 09:25:33 PM
Wasn't someone going to review the grungebuster mat? 

I bought one, it seemed to have a subtle impact on sound quality but I really haven't had the chance to sit down and do a thorough AB comparison.  Once I sit down and compare I'll let you know what I think.
Logged

Offline 1st set only

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2115
  • Gender: Male
  • you are what you is
    • Don Poulsen Illustration and Graphic Design
Re: Herbie's Halo Tube Dampeners
« Reply #8 on: March 11, 2005, 04:36:27 PM »
Give me a break!  ::)



is this really needed?
Logged
the show is over go home please.

Offline cheshirecat

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1210
  • Gender: Male
Re: Herbie's Halo Tube Dampeners
« Reply #9 on: March 11, 2005, 04:44:29 PM »
Looks like your interconnects have a cock ring.

But seriously... did you get the Black or white ones, they seem to be made of different materials, i wonder if it makes a difference...
Logged
SB2 / Rega P1 > Modified Dynaco PAS2 > Modified Dynaco MK-IV monoblocks> Axiom M22 v2

Offline Nick Culbreth

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3084
  • Gender: Male
Re: Herbie's Halo Tube Dampeners
« Reply #10 on: March 11, 2005, 05:10:48 PM »
Quote from: abada on March 11, 2005, 04:36:27 PM
Give me a break!  ::)

is this really needed?

I don't know about the IC rings but if they made half the improvement that the tube rings make they'd be money well spent IMHO.

Quote from: cheshirecat on March 11, 2005, 04:44:29 PM
Looks like your interconnects have a cock ring.

But seriously... did you get the Black or white ones, they seem to be made of different materials, i wonder if it makes a difference...

I got the white ones, from what I understand that the white and black ones are made of different materials but that it doesn't make a difference in sound.
Logged

Offline Lil Kim Jong-Il

  • Trade Count: (6)
  • Needs to get out more...
  • *****
  • Posts: 6498
  • large Marge sent me
Re: Herbie's Halo Tube Dampeners
« Reply #11 on: March 11, 2005, 06:50:35 PM »
If anyone is interested in trying some of these for small tubes, I have white ones I would like to sell so I can replace them with the black ones.  Didn't matter until I removed the cage but now I think the dark ones would look better on the exposed tubes.
Logged
The first rule of amateur neurosurgery club is .... I forget.

Offline Nick Culbreth

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3084
  • Gender: Male
Re: Herbie's Halo Tube Dampeners
« Reply #12 on: March 11, 2005, 06:52:16 PM »
Quote from: El Barto on March 11, 2005, 06:50:35 PM
If anyone is interested in trying some of these for small tubes, I have white ones I would like to sell so I can replace them with the black ones.  Didn't matter until I removed the cage but now I think the dark ones would look better on the exposed tubes.

If you've had them for less than 90 days you can send them back for a full refund and use that towards some black ones.
Logged

Offline Lil Kim Jong-Il

  • Trade Count: (6)
  • Needs to get out more...
  • *****
  • Posts: 6498
  • large Marge sent me
Re: Herbie's Halo Tube Dampeners
« Reply #13 on: March 11, 2005, 06:58:53 PM »
Had them for over a year.
Logged
The first rule of amateur neurosurgery club is .... I forget.

Offline ducati

  • Trade Count: (3)
  • Taperssection Member
  • ***
  • Posts: 572
  • I'm a llama!
Re: Herbie's Halo Tube Dampeners
« Reply #14 on: March 12, 2005, 12:16:20 AM »
Have those KT90's gone out?  If not, let's work a deal on the Herbies.  How many do you have?
Logged
Pages: [1] 2  All   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.083 seconds with 39 queries.
© 2002-2024 Taperssection.com
Powered by SMF