Taperssection.com
Gear / Technical Help => Microphones & Setup => Topic started by: Nick's Picks on July 07, 2008, 09:45:38 PM
-
http://tinyurl.com/5gbwyy
anyone ever fly these little bad boys?
just wondering.....they seem nice.
omni, card and hyper caps. 40-20kHz
(http://www.markertek.com/productImage/BIG/AUD-ADX40.JPG)
-
look like my olde AT 853a's
same cable length
Audix make some nice affordable mics ... and based (here)
in Oregon
:)
I would like to see them have a bit more low end ... say to 30 or even 20
my AT's are 30 to 20k
but
yes I am wondering too if anyone has any experience with these?
-
Anyone?
Wonder if they can be modded like the 853's.
-
The caps *appear* to be the same as the M1290 / M1280 series caps.
-
calling church audio
-
I just saw this. Is there any more information on these mics? Does anyone run them?
-
http://www.audixusa.com/docs/specs_pdf/adx40.pdf
Freq response looks really gnarly in a bad way (to my eyes at least).
-
The location of the threading on the caps also looks different from the M1290s, doubt they're very similar internally either. And really, assuming you want at least ORTF/DINa type spacing the M1290s are every bit as low profile.
-
http://www.audixusa.com/docs/specs_pdf/adx40.pdf
Freq response looks really gnarly in a bad way (to my eyes at least).
Yeah, I saw that chart too.