Taperssection.com
Gear / Technical Help => Microphones & Setup => Topic started by: kindms on July 24, 2018, 07:21:41 PM
-
So I have to give credit to Hypnocracy as he mentioned the 15mm stuff the rig pictures thread. So i followed his links and it sent me down the rabbit hole of 15mm camera stuff.
I wanted to see if I could get a split omni bar that would break down and fit in my bag etc so not to have to carry the huge manfrotto for most shows
So I finally got most of the parts i ordered and I think it is going to work very well for my actives. current design idea is like this
clamp---------------shock-----------------clamp
Anyone know a shockmount that will take such a small diameter ?
what I have now is pretty cool. Its 4 sections 12" each and 2 really small clamps on the ends. So it will break down to 4 x 12" and they are super light but strong enough for the actives +
(http://www.blueberrydreams.com/15mmbar.JPG)
-
This can hold the 12 mm Tetramic shaft: https://www.adorama.com/ry041120.html
Not sure if it would be too tight for your 15 mm bar though.
-
This can hold the 12 mm Tetramic shaft: https://www.adorama.com/ry041120.html
Not sure if it would be too tight for your 15 mm bar though.
Thanks for the link
It helped me find this
https://www.bhphotovideo.com/c/product/1050990-REG/rycote_041130_portable_recorder_shockmount_hg.html
Which a little pricey I think will work perfectly for my project
-
It helped me find this
https://www.bhphotovideo.com/c/product/1050990-REG/rycote_041130_portable_recorder_shockmount_hg.html
Which a little pricey I think will work perfectly for my project
I have that mount. I haven't used it much, and don't know that I will in the future. If you want to save some money I could sell you mine. Just let me know via PM.