Taperssection.com

Gear / Technical Help => Post-Processing, Computer / Streaming / Internet Devices & Related Activity => Topic started by: carlbeck on April 25, 2015, 03:39:06 PM

Title: CD Wave Any way to save cue sheet for multiple sources?
Post by: carlbeck on April 25, 2015, 03:39:06 PM

I usually run two different sources per show. Is there anyway to save the cue sheet on CD Wave so it will track the shows when I load the different source? When I try to load the previous cue sheet it loads the tracks of the source I have already done, seems like there should be an easier way?

Title: Re: CD Wave Any way to save cue sheet for multiple sources?
Post by: vanark on April 25, 2015, 03:42:52 PM

Open the new WAV file and then open the cue sheet from your original WAV. It will ask if you want to open the original file, just answer no. Your track timing will be loaded onto the new WAV file.

Title: Re: CD Wave Any way to save cue sheet for multiple sources?
Post by: jagraham on April 25, 2015, 03:47:52 PM

^ Correct. You can drag and drop the cue file to the uncut source in CD WAV. Just make sure to tell it not to open the associated file.

Title: Re: CD Wave Any way to save cue sheet for multiple sources?
Post by: carlbeck on April 25, 2015, 04:31:25 PM

Thanks guys, I'll try it later tonight if I get my Zman groove on after the show.

Title: Re: CD Wave Any way to save cue sheet for multiple sources?
Post by: twatts (pants are so over-rated...) on April 25, 2015, 05:09:09 PM

Quote from: jagraham on April 25, 2015, 03:47:52 PM

^ Correct. You can drag and drop the cue file to the uncut source in CD WAV. Just make sure to tell it not to open the associated file.

You have to make sure your starting points are the same, ie the same "time".  CDWave and CUE only puts track marks at a specific time, so if your second WAV has starting point that is 1min. past the starting point of your first WAV, all the track marks will be exactly 1min. off... 

Terry