Taperssection.com
Gear / Technical Help => Remote Power => Topic started by: macdaddy on August 18, 2007, 03:11:41 PM
-
i dont want to fry my unit, which is spec'd @ 14v input, but the battery i have outputs 14.4v. i was hoping the two of them would play nicely with eachother, assuming i get the right cables @ rat shack.
thanks, in advance.
-
With 14 volt nominal input requirement, running at least up to 15 volts (and likely even 18 volts) should not pose a problem of any kind.