Become a Site Supporter and Never see Ads again!

Author Topic: How to fix damaged/broken cable on microphone-UK solution  (Read 4330 times)

0 Members and 1 Guest are viewing this topic.

Offline mrblister

  • Trade Count: (4)
  • Taperssection Newbie
  • *
  • Posts: 25
How to fix damaged/broken cable on microphone-UK solution
« on: April 21, 2014, 05:16:44 AM »
Hi,

Not sure whether this query should be in here or the mic stream.

My microphones Church Audio CA11 have developed a fault on one cable.  A fold in the cable has caused some sort of imternal damage so that when recording i get sporadic bursts of noise/interference when the cable moves slightly.  I think i need to have the mics rewired.  This has happened a couple of years back and i returned the mics to Canada for the job..

Is there someone in the UK (either professional,retailer, or someone on this board) who can do this job for me - saving me postage and time delay if i sent the mic to Canada?

Cheers


Offline yates7592

  • Trade Count: (12)
  • Taperssection Member
  • ***
  • Posts: 694
  • Gender: Male
Re: How to fix damaged/broken cable on microphone-UK solution
« Reply #1 on: April 21, 2014, 07:11:56 AM »
Not sure where you are in the UK, but there's a guy in Glasgow who I've used in the past. I can dig out his details if you're interested.

Offline mrblister

  • Trade Count: (4)
  • Taperssection Newbie
  • *
  • Posts: 25
Re: How to fix damaged/broken cable on microphone-UK solution
« Reply #2 on: April 21, 2014, 07:31:47 AM »
Im in Liverpool... Im happy to stick them in the post if he can do the job.

Offline yates7592

  • Trade Count: (12)
  • Taperssection Member
  • ***
  • Posts: 694
  • Gender: Male
Re: How to fix damaged/broken cable on microphone-UK solution
« Reply #3 on: April 23, 2014, 04:25:10 PM »
Here you go, his name is Iain McClean, knows his stuff, services local pro outfits but caters for us small boys as well.

http://www.glse.co.uk/

Offline mrblister

  • Trade Count: (4)
  • Taperssection Newbie
  • *
  • Posts: 25
Re: How to fix damaged/broken cable on microphone-UK solution
« Reply #4 on: April 24, 2014, 03:30:09 PM »
Thanks very much ... I will give him a go

Offline Jofa

  • Trade Count: (9)
  • Taperssection Regular
  • **
  • Posts: 168
Re: How to fix damaged/broken cable on microphone-UK solution
« Reply #5 on: April 26, 2014, 10:11:30 AM »
Have a friend that broke a cable on his microphones, he needed s quick fix so he went to one of those shops near Tottenham Court road tube station in London. The changed the broken cable and miniplug in 1 hour or so.
Mics: DPA 4061's, 2xSony ECM-101, Audix 1290 capsules, Beyerdynamic CK930's, Countryman B3's
BBs: 2x custom made bb's
Pres: Tinybox V1.5,  Church Audio ST-9100, PIPsqueak
Recorders: Edirol R-09HR, Edirol R-09, Sony TCD-D8, Sony TCD-D3, Sony MZ-R50, Tascam DR-2d, Sony PCM-M10

 

RSS | Mobile
Page created in 0.133 seconds with 34 queries.
© 2002-2024 Taperssection.com
Powered by SMF