Taperssection.com
Gear / Technical Help => Cables => Topic started by: BennyBlanco on April 06, 2009, 11:22:20 PM
-
Just got 2 dpa 4061's will be in soon :)
I want to wire them so I don't need a battery box I would like to go with this config.
DPA L & R Separate > 2 1/4 TRS Jack Input on MAUDIO MT2 for phantom 48v power is there anyone who can point me in the right direction to get this accomplished.
Also do I need to mod the cables to not go above the recommended voltage or will the phantom adjust as needed for the mics?
Thanks in advance for any help.
;D
-
I think the easiest way to do this would be go:
DPA 4061 microdot male > DPA 6024 (microdot > XLR) > XLR to 1/4 cables.
The DPA 6024 converts 48v to 9v (what the 4061's take).
I don't know where to get the XLR to 1/4, but here is a link to the DPA 6024:
http://www.dpamicrophones.com/en/products.aspx?c=Item&category=138&item=24138
Someone else chime in if you have a better idea. Not 100% sure this is the "best" option.
-
where to get the XLR to 1/4...
H.A.V.E., (Hudson Audio Video Enterprises)...make custom cable assemblies for audio and video applications
800-999-4283, ext. 236, ask for Fritz
http://store.haveinc.com/default.aspx