Become a Site Supporter and Never see Ads again!

Author Topic: Zoom H2 line in 831' samples (ReGGae)  (Read 3010 times)

0 Members and 1 Guest are viewing this topic.

Offline Ray4PA

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 13
  • Gender: Male
  • Irie Taper
    • Reggaetraders.com
Zoom H2 line in 831' samples (ReGGae)
« on: July 16, 2008, 10:21:56 AM »
I don't post too much here but am reading a lot and it surprises me everytime how much knowledge is around here! Big up for yaselves! Love this place! So...I wanted to share my piece as well.

Recently I picked up a H2 as backup rig for festivals. What I needed was something less bulky (as the AD20/JB3 combo) for places I know they do a stripsearch.

First fieldtest was july 4th and have some samples for you guys as I keep on reading that this thingy doesn't work well with externals...well.. here is to prove you otherwise  ;D

I used none of the internal functions of the H2 (rec level 100), lineage is below and I recorded it at 24/48
Position was around the right stacks 3-5m away, mics just below my ears in the top of my jacket.

3 samples:

First the opener Lady K-Wida & Poor Man Friend
http://ray4pa.2freedom.com/sample%20K-Wida%20&%20PMF%2020080704-000.mp3

2nd

Basque Dub Foundation
http://ray4pa.2freedom.com/sample%20BDF%2020080704-001.mp3

3rd

The Heptones backed by the B.D.F.
http://ray4pa.2freedom.com/sample%20Heptones%20&%20BDF%2020080704-002.mp3

and a pic of the set...



enjoy Ray

*edit spelling  :P
« Last Edit: July 16, 2008, 10:37:27 AM by Ray4PA »
Balanced SP-CMC-2 (AT831') > HPF -3dB@82Hz > att. 20dB > AD-20 opt. > NJB3
Unbalanced SP-CMC-2 (AT831') > HPF -3dB@88Hz > att. 10dB > Zoom H2

Offline Ray4PA

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 13
  • Gender: Male
  • Irie Taper
    • Reggaetraders.com
Re: Zoom H2 line in 831' samples (ReGGae)
« Reply #1 on: July 16, 2008, 10:25:24 AM »
o yeah....no edit after the fact other then amped it up to -1 dB ...
Balanced SP-CMC-2 (AT831') > HPF -3dB@82Hz > att. 20dB > AD-20 opt. > NJB3
Unbalanced SP-CMC-2 (AT831') > HPF -3dB@88Hz > att. 10dB > Zoom H2

Offline Kevin T

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 100
Re: Zoom H2 line in 831' samples (ReGGae)
« Reply #2 on: July 16, 2008, 12:01:28 PM »
Sounds good! Any Bat box or low filter used or just staight to line in?

WRT poor external results, thats just the external MIC in but if you got a hot enuf signal for LINE in  most have good results. :)

Offline Ray4PA

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 13
  • Gender: Male
  • Irie Taper
    • Reggaetraders.com
Re: Zoom H2 line in 831' samples (ReGGae)
« Reply #3 on: July 16, 2008, 12:25:56 PM »
Sounds good! Any Bat box or low filter used or just staight to line in?

WRT poor external results, thats just the external MIC in but if you got a hot enuf signal for LINE in  most have good results. :)

Tnx :)

and yes running a HPF for sure. Running -3dB at 88Hz and a 10 dB pad before line in. Would never use mic on it indeed  ;)
Balanced SP-CMC-2 (AT831') > HPF -3dB@82Hz > att. 20dB > AD-20 opt. > NJB3
Unbalanced SP-CMC-2 (AT831') > HPF -3dB@88Hz > att. 10dB > Zoom H2

Offline cybergaloot

  • Trade Count: (7)
  • Needs to get out more...
  • *****
  • Posts: 4079
  • Gender: Male
  • Poohbah!
Re: Zoom H2 line in 831' samples (ReGGae)
« Reply #4 on: July 16, 2008, 12:43:21 PM »
Its the external mic jack that people complain about being noisy, not the line-in. I run Church-Audio CA-11s (card or omni, depending)>CA9000>H2(line-in) fairly often with good results. I did the same with Chris Church's CA-14 and CAFS mics that he has out on loan, also with good results. I've never tried the external mic in myself.
--
Walter

Everybody is ignorant, only on different subjects. Will Rogers

this>that>the other

 

RSS | Mobile
Page created in 0.06 seconds with 29 queries.
© 2002-2024 Taperssection.com
Powered by SMF