Gear / Technical Help > Remote Power

powering a DA-P1

<< < (3/3)

wbrisette:
Your least expensive option is probably to just buy one of the cheap $20 wall units available at the electronic/battery stores that will charge the 6v SLA battery, then buy two 4 pin XLR connectors and solder those on. Then when you find the wall unit, buy another 4 pin XLR and solder that onto the wall wart. Worst case, you end up with an extra wall unit that can provide you recharge capabilities should you need it.

Wayne

Swampy:

--- Quote from: wbrisette on October 18, 2003, 05:56:23 PM ---Your least expensive option is probably to just buy one of the cheap $20 wall units available at the electronic/battery stores that will charge the 6v SLA battery, then buy two 4 pin XLR connectors and solder those on. Then when you find the wall unit, buy another 4 pin XLR and solder that onto the wall wart. Worst case, you end up with an extra wall unit that can provide you recharge capabilities should you need it.

Wayne

--- End quote ---

T+ for the suggestions. I think we'll be okay with Daryan's for now!

Mic D:
I have an extra p1 wall wart if you need it.

Navigation

[0] Message Index

[*] Previous page