Hi y'all. Long time no post! ~waves~
The red wire on the battery connector of my DPA bb pulled free when I was installing a fresh battery - I gather it's an easy part to get from Radioshack and an easy DIY fix to replace it by attaching the fresh connector as per the original wires, but I can't get the housing of the box open to get at it!! I removed the two housing screws, but the faceplate (where the mics attach) seems to be holding it in place still. Is there a trick to separating the two halves?
Alternatively, is it ok simply to splice the new wires onto the old ones with tape so I don't have to go into the innards at all?
All assistance gratefully received - I really need to use this thing this week!
Thanks in advance....