Taperssection.com
Gear / Technical Help => Remote Power => Topic started by: BLOODYJACK on May 28, 2005, 08:21:50 PM
-
NP1 batteries are what all the pro field guys use anyone use them for there rig?
-
My dealer recommended using an NP1 to externally power my SD722. Looks great on paper except the price of batteries, and more so chargers, is pretty high.
- Jason
-
I know wayne is using them in the DEVA IV. that is the internal battrery they take.
-
I found some Ni-MH NP1 batterys for a great price I ordered 2
http://store.bargainbasementbatteries.com/bc1110.html
-
I know wayne is using them in the DEVA IV. that is the internal battrery they take.
I have 5 of them. 4 are 13.2 V NiMH and 1 is the 12 V NiCAD. I bought the 12v NiCAD locally (it's all they had) and turns out my charger won't take them. One of the downsides to NP-1 batteries is you have to have the right combination of batteries and chargers. The nice thing about them is I can fully recharge my batteries in less than 30 minutes. The bad thing is the price. The NiMH are around $120 each.
If anybody wants the 12v NiCAD drop me a line these run around $75.00 retail, and this one hasn't been used, so I'll make you a deal on it.
Wayne
-
If you look at the link I posted they have Ni-mi NP1 4 amp hour batteries for
$34.95 just got mine in the post yesterday
http://store.bargainbasementbatteries.com/bc1110.html
-
If you look at the link I posted they have Ni-mi NP1 4 amp hour batteries for
$34.95 just got mine in the post yesterday
http://store.bargainbasementbatteries.com/bc1110.html
You'll have to tell me how well they hold up. The 13.5 volt NiMH batteries I have are only 3.4 Amp hours, but they tend to last about 90-100 minutes under load in the Deva. I wonder how well these other batteries are going to hold up under load.
What are you using for a charger?
Wayne
-
A multi-purpose charger From another hobby
The first one chargers everything
http://www.robotcombat.com/marketplace_chargers.html
-
A multi-purpose charger From another hobby
The first one chargers everything
How do you get the leads to stay on the NP-1 contacts?
Wayne
-
It cost me 40 bucks and that was the cheap one
looks like I got the last one
http://www.bhphotovideo.com/bnh/controller/home?O=productlist&A=details&Q=&sku=241936&is=REG
-
If you didn't already have the recharger, you might have been better off buying a standard NP-1 charger.
Wayne
-
Your right but I also use that same cup to connect the battery in my rig so I needed it anyway
and I already have the charger.
The cheapest dedicated charger I found was about $175
-
So how did those NP-1 batteries work out? I've been tempted, but not enough to dump $35+ on a battery if it isn't going to work well.
Wayne
-
I have not used them yet. I got a wally world battery for my UA5.
I have a Sound Devices coming in the mail and a connector from digikey
so that I can use the batterys for that.