Taperssection.com

Gear / Technical Help => Cables => Topic started by: 1st set only on April 26, 2004, 02:16:26 PM

Title: Diameter of canare STAR QUAD?
Post by: 1st set only on April 26, 2004, 02:16:26 PM

Im lookin to throw both cables through som tech flex tubing so that it is much neater. does anyone know what the diameter of the star quads are?

Title: Re:Diameter of canare STAR QUAD?
Post by: Brian Skalinder on April 26, 2004, 02:36:32 PM

http://www.canare.com/catalog.html (http://www.canare.com/catalog.html)

Drill into Cables | Star Quad | Product # for the specs.

Title: Re:Diameter of canare STAR QUAD?
Post by: 1st set only on April 26, 2004, 02:44:27 PM

hmm thanks again Bri but that page only gives the jacket thickness brittle point and strength. not diameter unless the goggles are still on

what diameter sleeving would you recomend to house 2 cables and not be to bulky?

Title: Re:Diameter of canare STAR QUAD?
Post by: Brian Skalinder on April 26, 2004, 02:48:23 PM

I believe Nom O.D. is Nominal Outer Diameter, which should be your overall cable diameter spec.  No idea what diameter sleeving as I haven't used cable sleeves before.

Title: Re:Diameter of canare STAR QUAD?
Post by: 1st set only on April 26, 2004, 03:05:10 PM

thanks again

Title: Re:Diameter of canare STAR QUAD?
Post by: Lil Kim Jong-Il on April 26, 2004, 05:46:26 PM

just barely under 1/4 inch.  

I cable and a tape measure sitting here.  The jacket falls just inside the 1/4" marks.