Taperssection.com

Gear / Technical Help => Microphones & Setup => Topic started by: old and in the way on June 20, 2021, 06:45:27 PM

Title: shapeways mic mount
Post by: old and in the way on June 20, 2021, 06:45:27 PM
Shapeway mic bar recommendations for my Schoeps MK41v's with the cmc1 amps. reverse configuration . I can run them vertical with my rycote inv's and i guess i could run them reverse din or ortf but id like to take the guess work out of the equation  . Any recommendations ?
Title: Re: shapeways mic mount
Post by: Top Hat on June 21, 2021, 11:32:06 PM
Scott has some good insight into what you may need. I would reach out


https://www.shapeways.com/shops/srsrecordingservices?T=1624332675033
Title: Re: shapeways mic mount
Post by: old and in the way on July 15, 2021, 08:18:16 AM
Scott has some good insight into what you may need. I would reach out


https://www.shapeways.com/shops/srsrecordingservices?T=1624332675033

Thanks i got ahold of scott and have a vertical mount ordered for my cmc1 41v"s.
Title: Re: shapeways mic mount
Post by: dactylus on July 15, 2021, 08:46:36 AM
Scott has some good insight into what you may need. I would reach out


https://www.shapeways.com/shops/srsrecordingservices?T=1624332675033

Thanks i got ahold of scott and have a vertical mount ordered for my cmc1 41v"s.

 :clapping:
Title: Re: shapeways mic mount
Post by: cd2go on September 02, 2022, 11:40:52 PM
Hi all,

I haven't been successful trying to contact Scott through the Shapeways site. I'm trying to navigate which version of the Schoeps mounts are the correct fit for my CCM 4 K fixed-cable mics, to fit the mic cable housing (and are correct spacing) for them.

There is a CCM category, but they appear to be Lemo

NBobs, actives, versions? I'm lost! Any help appreciated. Looking to grab DIN, ORTF and NOS

Thanks!

-james
Title: Re: shapeways mic mount
Post by: voltronic on September 03, 2022, 07:00:27 PM
You could try contacting Scott through his company instead.
https://srsrecordingservices.com (https://srsrecordingservices.com)
Title: Re: shapeways mic mount
Post by: cd2go on September 04, 2022, 08:41:16 AM
Thank you, he responded right away! As it turns out all the CCM/NBob/active mounts he offers also fit the hardwired versions. However with the varying overall lengths of the OEM and aftermarket active cable housings, the patterns won’t be 100% perfect distance-wise of course. This doesn’t particularly concern me but he did offer to create specific CCM 4 K mounts if I take some measurements  :coolguy:
Title: Re: shapeways mic mount
Post by: cd2go on September 05, 2022, 07:08:42 PM
Well that was easy! Provided Scott with some measurements and pictures and within a day he had the CCM K models up  :clapping:

https://www.shapeways.com/marketplace/accessories/music?tag=ccmk4