Become a Site Supporter and Never see Ads again!

Author Topic: fig 8 question...  (Read 2235 times)

0 Members and 1 Guest are viewing this topic.

Offline loud noises

  • Trade Count: (1)
  • Taperssection Newbie
  • *
  • Posts: 41
fig 8 question...
« on: June 18, 2008, 10:56:40 PM »
I searched the board and found a bunch of conversation.
However, I'm out the door in 20 minutes so I'll run down
the situation...

I have the busman k-series mics.  I have never run the fig-8patterns but want to.
Do the markings on the caps have to be aligned in a certain way? I will clamp
backwards from a pole right in front of the stage. Will probably get about 2 feet
off the stage. Is fig-8 a good idea from there? What height should I use?  If the
guitarist is the the only one with an on-stage amp, should I aim it away from him?

Thanks in advance!

>Andy
Busman Audio BSC1's>The Big Green Fatty>FR2-LE [oade t-mod]

Offline page

  • Trade Count: (25)
  • Needs to get out more...
  • *****
  • Posts: 8388
  • Gender: Male
  • #TeamRetired
Re: fig 8 question...
« Reply #1 on: June 18, 2008, 11:09:17 PM »
The BSC1 series won't do fig8s, from busman, only the BA-l2 and BSCS-L will according to his site.

If your on stage, omni or super-card are my initial inclinations. good luck.
"This is a common practice we have on the bus; debating facts that we could easily find through printed material. It's like, how far is it today? I think it's four hours, and someone else comes in at 11 hours, and well, then we'll... just... talk about it..." - Jeb Puryear

"Nostalgia ain't what it used to be." - Jim Williams

Offline loud noises

  • Trade Count: (1)
  • Taperssection Newbie
  • *
  • Posts: 41
Re: fig 8 question...
« Reply #2 on: June 18, 2008, 11:11:54 PM »
oh you are right. I guess I'm confusing the hypers
with the fig-8. Are hypers worth using close to the
stage?
 
organ and bass going through the pa's above.
drums right-front, guitar amp left-front...
« Last Edit: June 18, 2008, 11:13:35 PM by loud noises »
Busman Audio BSC1's>The Big Green Fatty>FR2-LE [oade t-mod]

Offline H₂O

  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 5745
  • Gender: Male
Re: fig 8 question...
« Reply #3 on: June 18, 2008, 11:13:21 PM »
For Blumlein run the 8's pointed 90 coincident of each other and put center of the two 8's center of the sound source.  The caps need to be exactly on top of each other.

See
http://www.eqmag.com/article/blumlein-pair-stereo/jul-07/29600

Could run one mic Card/Sub Card and one Fig-8 for M/S

Both Blumlein and M/S sound great on stage lip.
Music can at the least least explain you and at the most expand you
LMA Recordings

List

Offline loud noises

  • Trade Count: (1)
  • Taperssection Newbie
  • *
  • Posts: 41
Re: fig 8 question...
« Reply #4 on: June 18, 2008, 11:18:15 PM »
I guess I want to know if I have to match the markings on the hyper-caps a certain way.
Or whether it doesn't matter where the marking match up, just that the caps are stacked
on top each other and creating a 90degree void in the middle...
Busman Audio BSC1's>The Big Green Fatty>FR2-LE [oade t-mod]

Offline H₂O

  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 5745
  • Gender: Male
Re: fig 8 question...
« Reply #5 on: June 18, 2008, 11:49:06 PM »
One Cap should point right 45 deg of center of sound source and the other should point left 45 deg of center of sound source.

Running Hypers or Cards in this fashion is considered X/Y.

Music can at the least least explain you and at the most expand you
LMA Recordings

List

Offline dean

  • Akustische u. Kino-Geräte!!!!
  • Trade Count: (2)
  • Needs to get out more...
  • Posts: 9057
  • Gender: Male
  • The Dude abides...
Re: fig 8 question...
« Reply #6 on: June 18, 2008, 11:53:00 PM »
Too late, prolly, but hypers have only limited use as you get close to the stage for a stereo recording.  Definitely not good for on stage unless it's a duo sitting close together or something.  I'd stay off stage and run 'em at close to an AB pattern with a little spread.  Better off using omnis or subcards if you're on stage...
Light weight: Sound Pro AT 831 or MBHO's > tinybox > D7 or Samson PM4's > Denecke PS-2 > D7
Slutty weight:  [MBHO MBP 603A + (KA100LK/KA200N/KA500HN)] and/or [AKG C 414 b xls (omni/sub-card/card/hyp/8)]  > Hi Ho Silver xlr's/other xlr's > Oade T & W Mod R-4 or UA-5 (BM2p+ mod.) or JB3 or D7

http://www.archive.org/bookmarks/deanlambrecht

 

RSS | Mobile
Page created in 0.046 seconds with 32 queries.
© 2002-2024 Taperssection.com
Powered by SMF