Become a Site Supporter and Never see Ads again!

Author Topic: Cable to record from the SBD  (Read 3108 times)

0 Members and 1 Guest are viewing this topic.

Offline swordfish

  • Trade Count: (3)
  • Taperssection Member
  • ***
  • Posts: 382
Cable to record from the SBD
« on: September 01, 2009, 05:58:42 AM »
Hi tapers,

I am planning to record the Magnolia Electric Co in the near future.

I know the are taper friendly and allow to tie into the SBD.  Which cable should I bring allong to be able to connect.

I have a long chince cable with 1/8" miniplug that would work with my Korg or Edirol.

But I am not shure if the chinch will work with the SBD .

I am sure that question was asked before......

thanks in advance,

swordfish


Offline Nick's Picks

  • Trade Count: (33)
  • Needs to get out more...
  • *****
  • Posts: 10260
  • Gender: Male
  • I thought I heard.......
Re: Cable to record from the SBD
« Reply #1 on: September 01, 2009, 07:56:24 AM »
all boards have a "tape out" , which is an RCA left/right pair.  And even if its being used, its going into "something" that will also have outputs that are likely RCA.
so RCA > your decks required input...and you're golden.

some even have a s/pdif output, but neither of those would help you w/the Korg/Edirol (r44 not withstanding)

Offline Brian Skalinder

  • Complaint Dept.
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 18868
  • Gender: Male
Re: Cable to record from the SBD
« Reply #2 on: September 01, 2009, 08:30:37 AM »
Check the stickied post at the top of the forum.
Milab VM-44 Links > Fostex FR-2LE or
Naiant IPA (tinybox format) >
Roland R-05

Offline swordfish

  • Trade Count: (3)
  • Taperssection Member
  • ***
  • Posts: 382
Re: Cable to record from the SBD
« Reply #3 on: September 02, 2009, 02:50:40 PM »
all boards have a "tape out" , which is an RCA left/right pair.  And even if its being used, its going into "something" that will also have outputs that are likely RCA.
so RCA > your decks required input...and you're golden.

some even have a s/pdif output, but neither of those would help you w/the Korg/Edirol (r44 not withstanding)



I am golden since I have the required cable RCA - 1/8" mini plug.

Thanks,

SF

Offline Neilyboy

  • Trade Count: (14)
  • Taperssection Member
  • ***
  • Posts: 917
  • Gender: Male
Re: Cable to record from the SBD
« Reply #4 on: October 01, 2009, 03:03:00 PM »
I wanna hear your meco pull when your done :) those guys are great!

Neil
Mic's: AKG C214's, Line Audio CM3, AT4041SP, AT853 (C, SC, O), AT943 (C, H)
Pre's: Sound Devices MixPre 2
Rec's: Sony PCM-M10, Edirol R-44, Tascam DR60D MKii, Tascam DR70D x 2

 

RSS | Mobile
Page created in 0.081 seconds with 29 queries.
© 2002-2024 Taperssection.com
Powered by SMF