Taperssection.com
Gear / Technical Help => Remote Power => Topic started by: Xpanding Man on February 24, 2004, 01:11:28 AM
-
running the phantom power, i used to get almost 4 hours ....now it's getting closer to three, even though the battery has only been used to pull about 35-40 shows of varying lengths
is this right, or did i just buy the lemon :P i thought these things were supposed to be good for about a hundred shows ?
thanks,
john
-
running the phantom power, i used to get almost 4 hours ....now it's getting closer to three, even though the battery has only been used to pull about 35-40 shows of varying lengths
is this right, or did i just buy the lemon :P i thought these things were supposed to be good for about a hundred shows ?
thanks,
john
hmmm, i still get consistent results w/ my oldest bp-50 from 99!!!
its recorded about 150 shows prolly w/ no hrs loss
-
I get ~3 hrs. using a 12v/7ah with my ad1k.
-
I get ~3 hrs. using a 12v/7ah with my ad1k.
3 hours for the AD1k using a 12v/7ah SLA is what I've seen most people report.
-
how many *shows*? Ha!
I'd carry two of those for a typical 2 set show.
-
12 volts are super heavy. Especially 2.
-
yes they are...
I sold my ad500e a few years back and will never carry 12v's again.
-
thinking the same thing tim...
how bout guys like jason and dave, who carry all those shepz tube PS's and then an apogee taboot. it's still worth it though, the AD stage is by far the best i've heard.
so 3 hours is normal... how long after the purple light starts blinking does it usually cut ? i've gone over an hour with that light blinking and not got cut off once.
-
It's still, to my ears, the best a/d for what we do, I prefer it over the minime, v3, modsbm-1 and ad2k. Great unit for sure!
running tubes and an ad1k would require some sort of sherpa!
not sure about the low light, sorry.
-
no worries, i already have a second 12volt, i guess it's coming with me to my next 2 set show.
-
thinking the same thing tim...
how bout guys like jason and dave, who carry all those shepz tube PS's and then an apogee taboot. it's still worth it though, the AD stage is by far the best i've heard.
so 3 hours is normal... how long after the purple light starts blinking does it usually cut ? i've gone over an hour with that light blinking and not got cut off once.
jason and dave run v3's, correct??? if ya mean sideshow and dave b, they run v3's, not being a dick, just thought thats who you meant, no shit tho, the PS's plus all that gear would suck, wonder how long the v3 goes NOT on phantom ???
-
"so 3 hours is normal... how long after the purple light starts blinking does it usually cut ? i've gone over an hour with that light blinking and not got cut off once."
dont know about the AD1K, but the AD2K+ cuts off after about an hour, BUT you will get this weird static noise on the recording for about 45 mins of that hour!
-
"so 3 hours is normal... how long after the purple light starts blinking does it usually cut ? i've gone over an hour with that light blinking and not got cut off once."
dont know about the AD1K, but the AD2K+ cuts off after about an hour, BUT you will get this weird static noise on the recording for about 45 mins of that hour!
hmmm, that is not good at all :P
-
yeah, not good at all.
found out the hard way at a Biscuits show last month
of course, if I had asked my friend whose gear I was using what the runtime was, I could have avoided the situation...oh well
-
Luvean,
how do you like that TL > V2 sound ?
-
havent even run the TL>V2>SBM1 yet...tomorrow night will be the first run.
ran TL>V2>AD2K+ last month for Biscuits (where I had the battery problems) and what actually came out sounds friggin great!(better than the official 'plan c' source)