Taperssection.com
Gear / Technical Help => Remote Power => Topic started by: coloartist on September 03, 2013, 07:40:20 PM
-
A friend has a DR100 and he wants to run external power. It says 5v on the plug on the side of the deck. That is usb voltage. Can I give him a Walmart lithium to run it. I have 9v versions. Is that too much voltage for the DR100? I can't find specs in the manual.
http://tascam.com/content/downloads/products/41/E_DR-100_OM_web.pdf (http://tascam.com/content/downloads/products/41/E_DR-100_OM_web.pdf)
Teds list says this Tascam DR100mkii / 5v/ Size B, 4.00mm OD × 1.70mm ID / Center pin (+) Ring (-) / Normal Polarity
Just not sure how strict the 5v is.
-
Fwiw, I've used 7.2v on the dr100mkii without issues.