Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1]   Go Down

Author Topic: Shure A26M...would it make a suitable M/S mount?  (Read 1726 times)

0 Members and 1 Guest are viewing this topic.

Offline larrysellers

  • Trade Count: (35)
  • Needs to get out more...
  • *****
  • Posts: 2152
  • Gender: Male
  • Qualified
Shure A26M...would it make a suitable M/S mount?
« on: June 17, 2013, 07:21:34 PM »
Take a look at the pic and let me know what you think.

Logged

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: Shure A26M...would it make a suitable M/S mount?
« Reply #1 on: June 17, 2013, 07:41:45 PM »
Seems fine to me. What size mm are the mount holes?
Logged
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline John Willett

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1550
  • Gender: Male
  • Bio:
    • Sound-Link ProAudio
Re: Shure A26M...would it make a suitable M/S mount?
« Reply #2 on: June 18, 2013, 06:08:37 AM »
Quote from: larrysellers on June 17, 2013, 07:21:34 PM
Take a look at the pic and let me know what you think.



It depends.....

It could work very well, but it will depend on the diameter of the microphones and the size of the microphone heads.

It could hold them too far apart, or too close.

My preferred method is to use a Rycote INV-7 or INV-7HG with a pair of the Rycote back-2-back clips.  This works perfectly.
Logged

Offline larrysellers

  • Trade Count: (35)
  • Needs to get out more...
  • *****
  • Posts: 2152
  • Gender: Male
  • Qualified
Re: Shure A26M...would it make a suitable M/S mount?
« Reply #3 on: June 18, 2013, 08:55:42 AM »
You're right John...the Rycote looks perfect. Thanks.
Logged
Pages: [1]   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.075 seconds with 29 queries.
© 2002-2024 Taperssection.com
Powered by SMF