0 Members and 1 Guest are viewing this topic.
cease and sesist
<<huh? >>just think of the biggest can worms. you might have opened it!
you may have stray wires if the strands werent tinned or soldered together correctly, I would consider sending them to someone who can help clean the insides up if needed
an old joke. do some searching and you'll figure it out. if you'd like me to look at the cables, let me know. it shouldn't be too hard to fix. if you have a continuity tester, you'll be fine fixing them yourself.
long story.... Daryan has a long and sordid past around here to his credit though he seems to be behaving himself better now
justink ...he pops up mainly in the team MG board and Playback forums. hes supposed to be sending me some splitters , and hope they destroy my Mics.. j/k he seems to be real square dealing lately..
Quote from: BigRay on September 02, 2005, 03:06:22 PMjustink ...he pops up mainly in the team MG board and Playback forums. hes supposed to be sending me some splitters , and hope they destroy my Mics.. j/k he seems to be real square dealing lately..wait a second, daryan is selling stuff here again??
yeah...he sold me a pair of cables also...i had to fix them myself. see my post from many moons ago here:http://taperssection.com/index.php?topic=31167.msg393106#msg393106
i bought some purple canare cables with right angle neutric connectors from daryan. i went through 2 shows that are now unlistenable because there was noise on of the channels and/or interemittant cut-outs in each show. turns out there was a short on the soldering of the cables to the connectors. i opened up the connector and couldnt believe what i saw. it was a mess in there. it looked like a blind person had soldered the connections. i had to resolder the cables myself and added heat shrink wrap, and now they work fine.