Become a Site Supporter and Never see Ads again!

Author Topic: iRiver H120 CF Mod Attempt - Success!  (Read 160721 times)

0 Members and 1 Guest are viewing this topic.

Offline Chuck

  • Trade Count: (42)
  • Needs to get out more...
  • *****
  • Posts: 10811
  • Gender: Male
  • time between the notes...
    • My recordings on the LMA
Re: iRiver H120 CF Mod Attempt - Success!
« Reply #120 on: May 12, 2008, 09:09:09 PM »
Yeah, it's not exactly user friendly...
Reality is merely an illusion, albeit a very persistent one.

Microphones: AKG C 480 B comb-ULS/ CK 61/ CK 63, Sennheiser MKE 2 elements,  Audix M1290-o, Micro capsule active cables w/ Naiant PFA's, Naiant MSH-1O, Naiant AKG Active cables, Church CA-11 (cardioid), (1) Nady SCM-1000 (mod)
Pre-amps: Naiant littlebox, Naiant littlekit v2.0, BM2p+ Edirol UA-5, Church STC-9000
Recorders: Sound Devices MixPre-6, iRiver iHP-120 (Rockboxed & RTC mod)

Recordings on the LMA: http://www.archive.org/bookmarks/ChuckM
Recording website & blog: http://www.timebetweenthenotes.com

Offline petur

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 544
  • Gender: Male
  • wtb: time
Re: iRiver H120 CF Mod Attempt - Success!
« Reply #121 on: May 13, 2008, 03:58:52 AM »
Yes, we need to release new 'official' bootloaders that support CF. Until then, this is what we have on offer.
There is a 'ready to use' bootloader for H3x0 on that wiki page, and a bit of instructions for h1x0

Offline Rapide23

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 9
Re: iRiver H120 CF Mod Attempt - Success!
« Reply #122 on: May 14, 2008, 08:01:04 AM »
I can't help thinking CF modding is the cheapest way to the best sounding flash player ever.

Offline Arni99

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 770
  • Gender: Male
Re: iRiver H120 CF Mod Attempt - Success!
« Reply #123 on: May 17, 2008, 11:06:04 AM »
I just succeeded doing the CF-mod on my rockboxed iHP-120!  ;D

What did I do on my iHP-120:

(0. Order the CF-to-IDE-adapter => ebay)

1. install the latest H120 rockbox-build from today

2. download the necessary "7pre4"-bootloader for the H120 here:
http://www.rockbox.org/twiki/bin/viewfile/Main/IriverFlashing?rev=1;filename=bootloader_h120_7pre4.zip

3. copy the "7pre4"-bootloader to your H120´s harddisk(root directory)

4. FLASHING:
First Initialize your player as follows: (Stop audio-playback).

- Set "Show Files" to "All" in "General Settings"
- Enter the File Browser by choosing "Files" in the Rockbox menu
- Navigate to "bootloader.iriver"
- Mark "bootloader.iriver" and press(long) joystick - then select "Open with..."
- From the list of plugins, select "iriver_flash" and execute.
- If all went smoothly a confirmation message should be displayed
- Press PLAY-button (right side TOP-button) to confirm, the firmware flashing-process starts,
- "Success"-message and the player will return to the file browser

5. Copy the complete rockbox directory to your PC

6. Replace the HDD using the CF-to-IDE Adapter mentioned in this thread on page 1.

7. Bend down the adpater´s jumper, otherwise you´ll run into issues later on ;)

8. Copy the folder from your PC back to the CF-card

9. Fix the 8 torx screws and you are DONE!




I use a SANDISK 8GB extreme III CF-card, which has ONLY 133x speed(about 20MB/s read and write).

No errors on boot-screen.

"System/Rockbox-Info" shows 7.xx GB as supposed to.

Here a pic of my "challenge":
My 8GB CF card attached to the ebay-Honkong-"CF-to-IDE adapter" :): You can see how I needed to bend down the blue jumper.

« Last Edit: August 23, 2009, 01:44:59 PM by Arni99 »
1st: SONY PCM-M10 + DPA 4060's + DPA MPS 6030 power supply (microdot)
2nd: iPhone 5 + "Rode iXY" microphone/"Zoom IQ5" microphone

Offline deadhoarse

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 348
  • Gender: Male
Re: iRiver H120 CF Mod Attempt - Success!
« Reply #124 on: May 17, 2008, 12:17:39 PM »
7. Bend down the adpater´s jumper, otherwise you´ll run into issues later on ;)

Is the jumper still study on the pins after bending them down?  I have an adapter on the way and was wondering if it would just be safer to solder the pins together.

Offline Chuck

  • Trade Count: (42)
  • Needs to get out more...
  • *****
  • Posts: 10811
  • Gender: Male
  • time between the notes...
    • My recordings on the LMA
Re: iRiver H120 CF Mod Attempt - Success!
« Reply #125 on: May 17, 2008, 12:20:34 PM »
I bent mine down, too. It works fine. Soldering it wouldn't be that hard either.
Reality is merely an illusion, albeit a very persistent one.

Microphones: AKG C 480 B comb-ULS/ CK 61/ CK 63, Sennheiser MKE 2 elements,  Audix M1290-o, Micro capsule active cables w/ Naiant PFA's, Naiant MSH-1O, Naiant AKG Active cables, Church CA-11 (cardioid), (1) Nady SCM-1000 (mod)
Pre-amps: Naiant littlebox, Naiant littlekit v2.0, BM2p+ Edirol UA-5, Church STC-9000
Recorders: Sound Devices MixPre-6, iRiver iHP-120 (Rockboxed & RTC mod)

Recordings on the LMA: http://www.archive.org/bookmarks/ChuckM
Recording website & blog: http://www.timebetweenthenotes.com

Offline Arni99

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 770
  • Gender: Male
Re: iRiver H120 CF Mod Attempt - Success!
« Reply #126 on: May 18, 2008, 02:38:23 AM »
info-update:
i did a testrecording(16bit 44.1kHz) using internal mics and internal battery and the results are:
disc-full message after 12h48min resulting in 3 files a 3h22min and 1 file a 2h42min.
=>pressing STOP brought me back to the menue in rockbox.

conclusion:
-considerably extended battery life=>battery still at 28% after 12h48min recording
-internal mics: NO disturbing write-to-disk-sounds of the old 1,8" HDD anymore every 2-3min when the buffer gets written to the CF-card
-fast and smooth navigation through the rockbox menue compared to using a HDD
-no vibrations anymore
-using my 8GB 133x speed sandisk extreme III card, the transfer of a 2GB WAV file(3h22min recording) takes exactly 4min 00 seconds using the USB 2.0 cable.
Thats not bad at all....I thought 133x cards would take ages for transferring HAHA.

Overall I´don´t regret having taken this step! It only got better  ;D!
« Last Edit: May 19, 2008, 05:48:35 AM by Arni99 »
1st: SONY PCM-M10 + DPA 4060's + DPA MPS 6030 power supply (microdot)
2nd: iPhone 5 + "Rode iXY" microphone/"Zoom IQ5" microphone

Offline Ziggz

  • Trade Count: (12)
  • Taperssection Member
  • ***
  • Posts: 479
Re: iRiver H120 CF Mod Attempt - Success!
« Reply #127 on: May 23, 2008, 10:38:08 PM »
Nice instructions Arni, worked like a charm  :)

Last week my 'new' iHP-120 arrived, with what I suspect is a dodgy hard drive (nice bunch of clicking, trouble copying the rockbox folder over, recording (00000002) errors, etc - formatting made it more stable, but still the 00000002 error). I didn't bother sending it back, as I was planning to do the CF mod. My adapter arrived yesterday, chucked in a cheapie Adata 4gb "speedy" card, and away she goes. Boots up a lot faster, and left it recording for over 3hrs. Works great, and not much battery drain. Will use it at a show next month.

Offline sullen

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 584
Re: iRiver H120 CF Mod Attempt - Success!
« Reply #128 on: May 25, 2008, 10:02:22 AM »
Is there any difference in sound quality?
don't > care > to > list > gear > in > signature

Offline Arni99

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 770
  • Gender: Male
Re: iRiver H120 CF Mod Attempt - Success!
« Reply #129 on: May 25, 2008, 01:38:05 PM »
Is there any difference in sound quality?

No, why should the soundquality be different?
1st: SONY PCM-M10 + DPA 4060's + DPA MPS 6030 power supply (microdot)
2nd: iPhone 5 + "Rode iXY" microphone/"Zoom IQ5" microphone

Offline Javier Cinakowski

  • !! Downhill From Here !!
  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 4325
  • Gender: Male
Re: iRiver H120 CF Mod Attempt - Success!
« Reply #130 on: May 25, 2008, 06:58:55 PM »
I personally find my recordings to have less noise.  So yes, better sound quality  :)
Neumann KM185mp OR DPA ST2015-> Grace Design Lunatec V2-> Tascam DR-100mkIII

Offline rokpunk

  • WOULD HIT IT
  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 9262
  • Gender: Male
Re: iRiver H120 CF Mod Attempt - Success!
« Reply #131 on: May 25, 2008, 09:29:28 PM »
Is there any difference in sound quality?


yes. the hard drive no longer rattles.
The new and improved taperssection.com....now with freedom of speech without the repercussion of -T's!



again, your showing your cluelessness.


Jah sitteth in Mount Zion
And rules all creation........

Offline GrandMasterMark

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 35
  • Gender: Male
  • Hold still my sexy little mule!
Re: iRiver H120 CF Mod Attempt - Success!
« Reply #132 on: June 10, 2008, 11:20:56 AM »
Can anyone tell me how to verify the speed of a CF card? I just bought a 280X 16gb card and it seems slower than I expected.
LIVE MP3s?!? Disclaimer: If you're anything like me, you'll utterly hate how this shit sounds, which is no offense to (names removed), who have been to too many shows with their digital toys to NOT make me feel guilty about not playing better. But like I keep telling them, live music is for listening to live where bodies, surfaces and beer absorb the blemishes, and recorded music, well, that's why you fucking go to a studio to make your records, right? Nevertheless, in the interest of full disclosure, and because some people dig this shit, here's a few nuggets of live joy, some old shit, some new, some borrowed and no goddamn blues, because I'm white and have more respect for BLAH BLah blah

Offline Arni99

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 770
  • Gender: Male
Re: iRiver H120 CF Mod Attempt - Success!
« Reply #133 on: June 10, 2008, 06:12:04 PM »
Can anyone tell me how to verify the speed of a CF card? I just bought a 280X 16gb card and it seems slower than I expected.
Mine is a sandisk 8GB extreme III CF-card and it´s supposed transferrate is at 20MB/s(133 x speed) read/write.
My tests showed an actual transferrate of 8MB/s=>a 3h22min WAV recording(2GB limit) takes exactly 4minutes transfer-time with USB 2.0.
I´m happy as 4min for 3h22min WAV is not bad at all.


« Last Edit: June 11, 2008, 06:53:05 AM by Arni99 »
1st: SONY PCM-M10 + DPA 4060's + DPA MPS 6030 power supply (microdot)
2nd: iPhone 5 + "Rode iXY" microphone/"Zoom IQ5" microphone

Offline petur

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 544
  • Gender: Male
  • wtb: time
Re: iRiver H120 CF Mod Attempt - Success!
« Reply #134 on: June 11, 2008, 03:34:49 AM »
make sure the USB port you used isn't 1.1 - some gear (like my dell LCD) have build-in usb hubs that can make you cry: located conveniently on the edge of your screen but awfully slow

Also, if it is USB2, check there aren't too many devices on the hub.

Read reviews on the net about the card and its speed (even better: do that before buying)

 

RSS | Mobile
Page created in 0.079 seconds with 39 queries.
© 2002-2024 Taperssection.com
Powered by SMF